C3D10065I WOLFSPEED | Alldatasheet

Document overview

  • PDF pages: 6

Technical content

Features

  • 650-Volt Schottky Rectifier
  • Ceramic Package Provides 2.5kV Isolation
  • Zero Reverse Recovery Current
  • High-Frequency Operation
  • Temperature-Independent Switching Behavior
  • Positive Temperature Coefficient on VF Benefits
  • Electrically Isolated Package
  • Essentially No Switching Losses
  • Higher Efficiency
  • Reduction of Heat Sink Requirements
  • Parallel Devices Without Thermal Runaway

Applications

  • HVAC
  • Switch Mode Power Supplies (SMPS)
  • Boost diodes in PFC or DC/DC stages
  • Free Wheeling Diodes in Inverter Stages
  • AC/DC converters Package TO-220 Isolated VRRM = 650 V IF (TC=125˚C) = 10 A Qc = 24 nC PIN 1 PIN 2 CASE Part Number Package Marking C3D10065I Isolated TO-220-2 C3D10065I Maximum Ratings (TC = 25˚C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note VRRM Repetitive Peak Reverse Voltage 650 V VRSM Surge Peak Reverse Voltage 650 V VDC DC Blocking Voltage 650 V IF Continuous Forward Current A TC=25˚C TC=125˚C TC=135˚C Fig. 3 IFRM Repetitive Peak Forward Surge Current 39

26.5 A TC=25˚C, tP=10 ms, Half Sine Pulse

TC-110˚C, tP=10 ms, Half Sine Pulse IFSM Non-Repetitive Peak Forward Surge Current 90

70 A TC=25˚C, tP=10 ms, Half Sine Pulse

TC=110˚C, tP=10 ms, Half Sine Pulse Fig. 8 IF,Max Non-Repetitive Peak Forward Surge Current 860

680 A TC=25˚C, tP=10 ms, Pulse

TC=110˚C, tP=10 ms, Pulse Fig. 8 Ptot Power Dissipation 60

26 W TC=25˚C

TC=110˚C Fig. 4 dV/dt Diode dV/dt ruggedness 200 V/ns VR=0-650V ∫i2dt i2t value 40.5

24.5 A2s TC=25˚C, tP=10 ms

TC=110˚C, tP=10 ms TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C TO-220 Mounting Torque 1 8.8 Nm lbf-in M3 Screw 6-32 Screw

C3D10065I Rev. E, 01-2018

Electrical Characteristics

Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.5 2.0 1.8

2.4 V IF = 10 A TJ=25°C

IF = 10 A TJ=175°C Fig. 1 IR Reverse Current 12 220 μA VR = 650 V TJ=25°C VR = 650 V TJ=175°C Fig. 2 QC Total Capacitive Charge 24 nC VR = 400 V, IF = 10 A di/dt = 500 A/μs TJ = 25°C Fig. 5 C Total Capacitance 460.5 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Fig. 6 EC Capacitance Stored Energy 3.6 μJ VR = 400 V Fig. 7 Note: This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. Unit Note RθJC Thermal Resistance from Junction to Case 2.5 °C/W Fig. 9 Typical Performance 100Reverse Leakage Current, IRR (mA) TJ = 175 °C TJ = 125 °C TJ = 75 °C T = 25 °C 0 100 200 300 400 500 600 700 800 900 1000 Reverse Leakage Current, I Reverse Voltage, VR (V) TJ = -55 °C TJ = 25 °C Figure 1. Forward Characteristics Figure 2. Reverse Characteristics

Figure 7. Capacitance Stored Energy Figure 9. Transient Thermal Impedance

0.01 SinglePulse

Figure 8. Non-repetitive peak forward surge current

C3D10065I Rev. E, 01-2018 Note: Recommended soldering profiles can be found in the applications note here: http://www.wolfspeed.com/power_app_notes/soldering Package Dimensions Package TO-220-2 Part Number Package Marking C3D10065I Isolated TO-220-2 C3D10065I TO-220-2 Recommended Solder Pad Layout

C3D10065I Rev. E, 01-2018 Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power

  • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Wolfspeed representative or from the Product Ecology section of our website at http:// www.wolfspeed.com/power/tools-and-support/product-ecology.
  • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemi- cal Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.
  • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Notes
  • Cree SiC Schottky diode portfolio: http://www.wolfspeed.com/Power/Products#SiCSchottkyDiodes
  • Schottky diode Spice models: http://www.wolfspeed.com/power/tools-and-support/DIODE-model-request2
  • SiC MOSFET and diode reference designs: http://go.pardot.com/l/101562/2015-07-31/349i Related Links Diode Model VT RT Diode Model CSD04060 Vf T = VT + If*RT Note: Tj = Diode Junction Temperature In Degrees Celsius, valid from 25°C to 175°C VfT = VT + If * RT