C1805C106J2RACTU

Kemet Corporation

X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) 8/8/2024

Manufacturer: Kemet Corporation

Document: 28 Pages / 1,015Kb

Request Quote Download Datasheet Read online HTML view

More from Kemet Corporation Browse C parts

Online Datasheet

Read C1805C106J2RACTU online.

C1206C106M4RACTU_V01 KEMET | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 28

Technical content

1© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

−55°C to +125°C operating temperature range L ead (Pb)-free, RoHS, and REACH Compliant T emperature stable dielectric E IA 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 case sizes
DC voltage ratings of 6.3 200 and 250 V
Capacitance offerings ranging from pF to μF A vailable capacitance tolerances of ±5%, ±10%, and ±20%
Non-polar device, minimizing installation concerns
100% pure matte tin-plated termination finish allowing for ex cellent solderability
SnPb termination finish option available upon request (5% Pb minimum) Overview KEMET’s X7R dielectric features a 125°C maximum oper ating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials Association (EIA) characterizes X7R dielectric as a Class II material. Components of this classification are fix ed, ceramic dielectric capacitors suited for bypass and decoupling

applications

cir cuits where Q and stability of capacitance characteristics ar e not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage, boasting a minimal change in capacitance with reference to ambient temper ature. Capacitance change is limited to ±15% from −55°C to +125°C. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Typical applications include decoupling, bypass, filtering and transient voltage suppression.

2© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade)

Ordering Information

(L" x W") Specification/ Series1 Capacitance Code (pF) Capacitance Tolerance Rated Voltage VDC) Dielectric Failure Rate/ Design Termination Finish2 Packaging/ Grade (C-Spec) 0402 0603 0805 1206 1210 1805 1808 1812 1825 2220 2225 C = Standard Two significant d igits and n umber of zeros. J = ±5% K = ±10% M = ±20% 9 = 6.3 8 = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = 100 2 = 200 A = 250 R = X7R A = N/A C = 100% Matte Sn See “Packaging C -Spec Ordering O ptions Table” 1 Flexible termination option is available. Please see FT-CAP product bulletin C1013_X7R_FT-CAP_SMD. 2 Additional termination finish options may be available. Contact KEMET for details. Packaging C-Spec Ordering Options Table Packaging Type1 Packaging/Grade Ordering Code (C-Spec) Bulk Bag/Unmarked Not required (Blank) 7" Reel/Unmarked TU 13" Reel/Unmarked 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) 7" Reel/Marked TM 13" Reel/Marked 7040 (EIA 0603) 7215 (EIA 0805 and larger case sizes) 1 Default packaging is "Bulk Bag." An ordering code C-Spec is not required for "Bulk Bag" packaging. 1 The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking."

3© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Dimensions – Millimeters (Inches) L B W S T EIA Size Code Metric Size Code L Length W Width T Thickness B Bandwidth S Separation Minimum Mounting Technique 10402 1005 1.00 (0.040) ±0.05 (0.002) 0.50 (0.020) ±0.05 (0.002) See Table 2 for Thickness 0.30 (0.012) ±0.10 (0.004) 0.30 (0.012) Solder reflow o nly 20603 1608 1.60 (0.063) ±0.15 (0.006) 0.80 (0.032) ±0.15 (0.006) 0.35 (0.014) Solder wave or Solder reflow 30805 2012 2.00 (0.079) ±0.20 (0.008) 1.25 (0.049) ±0.20 (0.008) 0.50 (0.02) 41206 3216 3.20 (0.126) ±0.20 (0.008) 1.60 (0.063) ±0.20 (0.008) 0.50 (0.02) 51210 3225 3.20 (0.126) ±0.20 (0.008) 2.50 (0.098) ±0.20 (0.008) 0.50 (0.02) Solder reflow o nly 1805 4513 4.50 (0.177) ±0.50 (0.020) 1.27 (0.050) ±0.38 (0.015) 0.60 (0.024) 1808 4520 4.70 (0.185) ±0.50 (0.020) 2.00 (0.079) ±0.20 (0.008) 0.60 (0.024) 1812 4532 4.50 (0.177) ±0.30 (0.012) 3.20 (0.126) ±0.30 (0.012) 0.60 (0.024) 1825 4564 4.50 (0.177) ±0.30 (0.012) 6.40 (0.252) ±0.40 (0.016) 0.60 (0.024) 2220 5650 5.70 (0.224) ±0.40 (0.016) 5.00 (0.197) ±0.40 (0.016) 0.60 (0.024) 2225 5664 5.60 (0.220) ±0.40 (0.016) 6.40 (0.248) ±0.40 (0.016) 0.60 (0.024) 1 For capacitance values ≥ 5.6 nF 100V add 0.05 (0.002) to the length and width tolerance dimension 2 For capacitance capacitance value 0.22 µF 50V add 0.10 (0.004) to length 3 For capacitance values ≥ 2.2 µF add 0.10 (0.004) to the length tolerance dimension. tolerance dimension. For capacitance value 100 nF 250V & 200V add 0.10 (0.004) to the length tolerance dimension. capacitance value 220 nF ≤ 50V add 0.10 (0.004) to the width tolerance dimension.

4© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Qualification/Certification Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are r eferenced in Table 4, Performance & Reliability. Environmental Compliance Lead (Pb)-free, RoHS, and REACH compliant without exemptions. Lead-free Table 1A – Capacitance Range/Selection Waterfall (0402 – 1206 Case Sizes) *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91). **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82). xx 1 Available only in K and M tolerance. Cap Cap Code Case Size/ Series C0402C C0603C C0805C C1206C Voltage Code 9 8 4 3 5 1 9 8 4 3 5 1 2 A 9 8 4 3 6 5 1 2 A 9 8 4 3 6 5 1 2 A Rated Voltage (VDC) 6.3 100 6.3 100 200 250 6.3 100 200 250 6.3 100 200 250 Cap Tolerance Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions 10 - 20 pF* 100 - 200* J K M BB BB BB BB BB CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB 22 pF 220 J K M BB BB BB BB BB CF CF CF CF CF CF CF DM DM DM DM DM DM DN DN EB EB EB EB EB EB EB EB 24 - 91pF 240 - 910* J K M BB BB BB BB BB CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB 100 - 150 pF 101 - 151 J K M BB BB BB BB BB CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB 180 - 820 pF 181 - 821 J K M BB BB BB BB BB CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB 1000pF 102 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 1200 pF 122 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 1500 pF 152 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 1800 pF 182 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 2200 pF 222 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 2700 pF 272 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 300 pF 332 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 3900 pF 392 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 4700 pF 472 J K M BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 5600 pF 562 J K M BB BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 6800 pF 682 J K M BB BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 8200 pF 822 J K M BB BB BB BB BB BB CF CF CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 10000 pF 103 J K M BB BB BB BB BB BB CG CG CG CG CG CG CF CF DN DN DN DN DN DN DN DN DN EL EL EL EL EL EL EL EL EL 12000 pF 123 J K M BB BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 15000 pF 153 J K M BB BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EQ EQ EQ EQ EQ EQ EQ EQ EQ 18000 pF 183 J K M BB BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 22000 pF 223 J K M BB BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DN DN DN EB EB EB EB EB EB EB EB EB 7000 pF 273 J K M BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DP DE DG EB EB EB EB EB EB EB EB EB Cap Cap Code Rated Voltage (VDC) 6.3 100 6.3 100 200 250 6.3 100 200 250 6.3 100 200 250 Voltage Code 9 8 4 3 5 1 9 8 4 3 5 1 2 A 9 8 4 3 6 5 1 2 A 9 8 4 3 6 5 1 2 A Case Size/ Series C0402C C0603C C0805C C1206C

5© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 1A – Capacitance Range/Selection Waterfall (0402 – 1206 Case Sizes) cont. *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91). **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82). xx 1 Available only in K and M tolerance. xx2 Available only in M tolerance. Cap Cap Code Case Size/ Series C0402C C0603C C0805C C1206C Voltage Code 9 8 4 3 5 1 9 8 4 3 5 1 2 A 9 8 4 3 6 5 1 2 A 9 8 4 3 6 5 1 2 A Rated Voltage (VDC) 6.3 100 6.3 100 200 250 6.3 100 200 250 6.3 100 200 250 Cap Tolerance Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions 33000 pF 333 J K M BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DP DE DG EB EB EB EB EB EB EB EB EB 39000 pF 393 J K M BB BB BB BB CF CF CF CF CF CF DN DN DN DN DN DN DP DE DG EB EB EB EB EB EB EC EB EB 47000 pF 473 J K M BB BB BB BB CG CG CG CG CJ CF DO DO DO DO DO DO DE DG DG EB EB EB EB EB EB EC ED ED 56000 pF 563 J K M BB BB BB CF CF CF CF CF CJ DP DP DP DP DP DP DE DG DG EB EB EB EB EB EB EB ED ED 68000 pF 683 J K M BB BB BB CF CF CF CF CF CJ DP DP DP DP DP DP DE DG DG EB EB EB EB EB EB EB ED ED 82000 pF 823 J K M BB BB BB CF CF CF CF CF CJ DP DP DP DP DP DP DE EB EB EB EB EB EB EB ED ED 0.1 µF 104 J K M BB BB BB BB¹ CJ CJ CJ CJ CJ CJ DN DN DN DN DN DN DH EB EB EB EB EB EB EB EH EH 0.12 µF 124 J K M CF CF CF CF CF DN DN DN DN DP DP DG EC EC EC EC EC EC EC EG EM 0.15 µF 154 J K M CF CF CF CF CF DN DN DN DN DP DP DG EC EC EC EC EC EC EC EG EG 0.18 µF 184 J K M CF CF CF CF DN DN DN DN DG DG DG EC EC EC EC EC EC EC EM EM 0.22 µF 224 J K M BB² BB² BB² BB² CF CF CF CF CJ DN DN DN DN DG DG DG EC E C EC EC EC EC EC EG EG 0.27 µF 274 J K M CF CF CF DP DP DP DP DP DP DG EB EB EB EB EC EC EM 0.33 µF 334 J K M CF CF CF DG DG DG DG DG DG EB EB EB EB EC EC EG 0.39 µF 394 J K M CF CF CF DG DG DG DG DE DE EB EB EB EB EC EC EG 0.47 µF 474 J K M BB¹ BB¹ CF CF CF CG DG DG DG DG DG DG EC EC EC EC EC EC EG 0.56 µF 564 J K M DP DP DP DG DH DH ED ED ED ED EC EC EM 0.68 µF 684 J K M DP DP DP DG DH DH EF EF EF EF ED ED EM 0.82 µF 824 J K M DP DP DP DG EF EF EF EF ED ED EH 1 µF 105 J K M CG CG CG CJ¹ DH DH DH DH DH¹ DH¹ EP EP EP EP EH EH EH 1.2 µF 125 J K M DE DE DE ED ED ED EG EH EH 1.5 µF 155 J K M DG DG DG ED ED ED EG EH EH 1.8 µF 185 J K M DG DG DG ED ED ED EF EH EH 2.2 µF 225 J K M CG¹ CG¹ DH DH DH DH¹ DH¹ DH¹ EH EH EH¹ EH¹ EH EH 2.7 µF 275 J K M EN EN EN EH 3.3 µF 335 J K M ED ED ED EH 3.9 µF 395 J K M EF EF EF EH 4.7 µF 475 J K M DH DH DH DH EH EH EH EH EH¹ EH¹ 5.6 µF 565 J K M EH EH EH 6.8 µF 685 J K M EH EH EH 8.2 µF 825 J K M EH EH EH 10 µF 106 J K M DH¹ DH¹ EH EH EH EH 22 µF 226 J K M EH¹ EH¹ Cap Cap Code Rated Voltage (VDC) 6.3 100 6.3 100 200 250 6.3 100 200 250 6.3 100 200 250 Voltage Code 9 8 4 3 5 1 9 8 4 3 5 1 2 A 9 8 4 3 6 5 1 2 A 9 8 4 3 6 5 1 2 A Case Size/ Series C0402C C0603C C0805C C1206C

6© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 1B – Capacitance Range/Selection Waterfall (1210 – 1812 Case Sizes) *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91). **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82). xx 1 Available only in K and M tolerance. 2 Available capacitance values available in X7R with KONNEKT Technology . Cap Cap Code Case Size/ Series C1210C C1805C C1808C C1812C2 Voltage Code 9 8 4 3 5 1 2 A 5 1 2 5 1 2 3 5 1 2 A Rated Voltage (VDC) 6.3 100 200 250 100 200 100 200 100 200 250 Cap Tolerance Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions 10 - 20 pF* 100 - 200* J K M FB FB FB FB FB FB FB 22 pF 220 J K M FB FB FB FB FB FB FB 24 - 91pF 240 - 910* J K M FB FB FB FB FB FB FB 100 - 150 pF 101 - 151 J K M FB FB FB FB FB FB FB 220 pF 221 J K M FB FB FB FB FB FB FB NC NC NC 270 pF 271 J K M FB FB FB FB FB FB FB NC NC NC 330 pF 331 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF 390 pF 391 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF 470 pF 471 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF GB GB GB GB 560 pF 561 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF GB GB GB GB 680 pF 681 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF GB GB GB GB 820 pF 821 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF GB GB GB GB 1000pF 102 J K M FB FB FB FB FB FB FB NC NC NC LF LF LF GB GB GB GB 1200 pF 122 J K M FB FB FB FB FB FB FB NC NC LF LF LF GB GB GB GB 1500 pF 152 J K M FB FB FB FB FB FB FE NC NC LF LF LF GB GB GB GB 1800 pF 182 J K M FB FB FB FB FB FB FE NC NC LF LF LF GB GB GB GB 2200 pF 222 J K M FB FB FB FB FB FB FB FB NC NC LF LF LF GB GB GB GB 2700 pF 272 J K M FB FB FB FB FB FB FB FB NA NA NA LF LF LF GB GB GB GB 3300 pF 332 J K M FB FB FB FB FB FB FB FB NA NA NA LF LF GB GB GB GB 900 pF 392 J K M FB FB FB FB FB FB FB FB NA NA NA LF LF GB GB GB GB 4700 pF 472 J K M FB FB FB FB FB FB FB FB NA NA NA LD LD LD GB GB GB GD 5600 pF 562 J K M FB FB FB FB FB FB FB FB NA NA NA LD LD LD GB GB GB GH 6800 pF 682 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 8200 pF 822 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 10000 pF 103 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 12000 pF 123 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 15000 pF 153 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 18000 pF 183 J K M FB FB FB FB FB FB FB FB NA NA LD LD LD GB GB GB GB GB 22000 pF 223 J K M FB FB FB FB FB FB FB FB NA NA LD LD GB GB GB GB GB 27000 pF 273 J K M FB FB FB FB FB FB FB FB NA NA LD LD GB GB GB GB GB 33000 pF 333 J K M FB FB FB FB FB FB FB FB NA LD LD GB GB GB GB GB 39000 pF 393 J K M FB FB FB FB FB FB FB FB NA LD LD GB GB GB GB GB 47000 pF 473 J K M FB FB FB FB FB FB FC FC NA LD LD GB GB GB GB GB 56000 pF 563 J K M FB FB FB FB FB FB FC FC NA LD LD GB GB GB GB GB 68000 pF 683 J K M FB FB FB FB FB FB FC FC NA LD GB GB GB GB GB Cap Cap Code Rated Voltage (VDC) 6.3 100 200 250 100 200 100 200 100 200 250 Voltage Code 9 8 4 3 5 1 2 A 5 1 2 5 1 2 3 5 1 2 A Case Size/Series C1210C C1805C C1808C C1812C2

7© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 1B – Capacitance Range/Selection Waterfall (1210 – 1812 Case Sizes) cont. *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91). **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82). xx 1 Available only in K and M tolerance. 2 Available capacitance values available in X7R with KONNEKT Technology . Cap Cap Code Case Size/ Series C1210C C1805C C1808C C1812C2 Voltage Code 9 8 4 3 5 1 2 A 5 1 2 5 1 2 3 5 1 2 A Rated Voltage (VDC) 6.3 100 200 250 100 200 100 200 100 200 250 Cap Tolerance Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions 82000 pF 823 J K M FB FB FB FB FB FC FF FF NA LD GB GB GB GB GB 0.1 µF 104 J K M FB FB FB FB FB FD FG FG NA LD GB GB GB GB GB 0.12 µF 124 J K M FB FB FB FB FB FD FH FH LD GB GB GB GB GB 0.15 µF 154 J K M FC FC FC FC FC FD FM FM LD GB GB GB GE GE 0.18 µF 184 J K M FC FC FC FC FC FD FK FK LD GB GB GB GG GG 0.22 µF 224 J K M FF FF FF FF FF FD FK FK GB GB GB GG GG 0.27 µF 274 J K M FC FC FC FC FC FD FP FP GB GB GG GG GG 0.33 µF 334 J K M FD FD FD FD FD FD FM FM GB GB GG GG GG 0.39 µF 394 J K M FD FD FD FD FD FD FK FK GB GB GG GG GG 0.47 µF 474 J K M FD FD FD FD FD FD FS FS GB GB GG GJ GJ 0.56 µF 564 J K M FD FD FD FD FD FF GC GC GG 0.68 µF 684 J K M FD FD FD FD FD FG GC GC GG 0.82 µF 824 J K M FF FF FF FF FF FL GE GE GG 1 µF 105 J K M FZ FZ FZ FZ FZ FT GE GE GG 1.2 µF 125 J K M FH FH FH FH FG FH GB GB GB 1.5 µF 155 J K M FH FH FH FH FG FM GC GC GC 1.8 µF 185 J K M FH FH FH FH FG FJ GE GE GE 2.2 µF 225 J K M FJ FJ FJ FJ FY FY¹ GO GO GO¹ 2.7 µF 275 J K M FE FE FE FG FH GJ GJ GJ 3.3 µF 335 J K M FF FF FF FM FM GL GL GL 3.9 µF 395 J K M FG FG FG FG FK GK GK 4.7 µF 475 J K M FC FC FC FG FS GK GK 5.6 µF 5 65 J K M FF FF FF FH 6.8 µF 685 J K M FG FG FG FM 8.2 µF 825 J K M FH FH FH FK 10 µF 106 J K M FT¹ FT¹ FT¹ GA¹ FS¹ GK 15 µF 156 J K M FM FM 22 µF 226 FS FS FS¹ FS¹ 47 µF 476 FS¹ FS¹ Cap Cap Code Rated Voltage (VDC) 6.3 100 200 250 100 200 100 200 100 200 250 Voltage Code 9 8 4 3 5 1 2 A 5 1 2 5 1 2 3 5 1 2 A Case Size/Series C1210C C1805C C1808C C1812C2

8© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 1C – Capacitance Range/Selection Waterfall (1825 – 2225 Case Sizes) *Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91). **Capacitance range Includes E12 decade values only. (i.e., 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, and 82). xx 1 Available only in K and M tolerance. 2 Available capacitance values available in X7R with KONNEKT Technology . Cap Cap Code Case Size/Series C1825C C2220C C2225C Voltage Code 5 1 2 A 3 5 1 2 A 5 1 2 A Rated Voltage (VDC) 100 200 250 100 200 250 100 200 250 Cap Tolerance Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions 3900 pF 392 J K M HB HB HB 4700 pF 472 J K M HB HB HB KE KE KE 5600 pF 562 J K M HB HB HB KE KE KE 6800 pF 682 J K M HB HB HB JE JE JE KE KE KE 8200 pF 822 J K M HB HB HB JE JE JE KE KE KE 10000 pF 103 J K M HB HB HE JE JE JE KE KE KE 12000 pF 123 J K M HB HB HE JE JE JE KE KE KE 15000 pF 153 J K M HB HB JE JE JE KE KE KE 18000 pF 183 J K M HB HE JE JE JE KE KE 22000 pF 223 J K M HB HB HB HB JE JE JE KE KE 27000 pF 273 J K M HB HB HB HB JE JE JE KE KE 33000 pF 333 J K M HB HB HB HB JB JB JB KE 39000 pF 393 J K M HB HB HB HB JB JB JB 47000 pF 473 J K M HB HB HB HB JB JB JB 56000 pF 563 J K M HB HB HB HB JB JB JB 68000 pF 683 J K M HB HB HB HB JB JB JB 82000 pF 823 J K M HB HB HB HB JC JC JC JC JC 0.1 µF 104 J K M HB HB HB HB JC JC JC JC JC KC KC KC KC 0.12 µF 124 J K M HB HB HB HB JC JC JC JC JC KC KC KC KC 0.15 µF 154 J K M HB HB HB HB JC JC JC JC JC KC KC KC KC 0.18 µF 184 J K M HB HB HB HB JC JC JC JC JC KC KC KC KC 0.22 µF 224 J K M HB HB HB HB JC JC JC JC JC KC KC KC KC 0.27 µF 274 J K M HB HB HB HB JC JC JC JC JC KB KC KC KC 0.33 µF 334 J K M HB HB HB HB JC JC JC JC JC KB KC KC KC 0.39 µF 394 J K M HB HB HD HD JC JC JC JC JC KB KC KC KC 0.47 µF 474 J K M HB HB HD HD JC JC JC JC JC KB KC KD KD .56 µF 564 J K M HB HD HD HD JC JC JC JD JD KB KC KD KD 0.68 µF 684 J K M HB HD HD HD JC JC JD JD JD KB KC KD KD 0.82 µF 824 J K M HB HF HF HF JC JC JF JF JF KB KC KE KE 1.0 µF 105 J K M HB HF HF HF JC JC JF JF JF KB KD KE KE 1.2 µF 125 J K M HB JC JC KB KE KE KE 1.5 µF 155 J K M HC JC JC KC 1.8 µF 185 J K M HD JD JD KD 2.2 µF 225 J K M HF JF JF KD 4.7 µF 475 J K M JF JF 10 µF 106 J K M JF JO 15 µF 156 J K M JO JO 22 µF 226 J K M JO Cap Cap Code Rated Voltage (VDC) 100 200 250 100 200 250 100 200 250 Voltage Code 5 1 2 A 3 5 1 2 A 5 1 2 A Case Size/Series C1825C C2220C C2225C

9© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 2A – Chip Thickness/Tape & Reel Packaging Quantities Package quantity based on finished chip thickness specifications. Thickness Code Case Size Thickness ± Range (mm) Paper Quantity Plastic Quantity 7" Reel 13" Reel 7" Reel 13" Reel BB 0402 0.50 ± 0.05 10,000 50,000 0 0 CF 0603 0.80 ± 0.07 4,000 15,000 0 0 CG 0603 0.80 ± 0.10 4,000 15,000 0 0 CJ 0603 0.80 ± 0.15 4,000 15,000 0 0 DM 0805 0.70 ± 0.20 4,000 15,000 0 0 DN 0805 0.78 ± 0.10 4,000 15,000 0 0 DO 0805 0.80 ± 0.10 4,000 15,000 0 0 DP 0805 0.90 ± 0.10 4,000 15,000 0 0 DE 0805 1.00 ± 0.10 0 0 2,500 10,000 DG 0805 1.25 ± 0.15 0 0 2,500 10,000 DH 0805 1.25 ± 0.20 0 0 2,500 10,000 EB 1206 0.78 ± 0.10 0 0 4,000 10,000 EQ 1206 0.78 ±0.20 0 0 4,000 10,000 EC 1206 0.90 ± 0.10 0 0 4,000 10,000 EN 1206 0.95 ± 0.10 0 0 4,000 10,000 ED 1206 1.00 ± 0.10 0 0 2,500 10,000 EE 1206 1.10 ± 0.10 0 0 2,500 10,000 EF 1206 1.20 ± 0.15 0 0 2,500 10,000 EP 1206 1.20 ± 0.20 0 0 2,500 10,000 EM 1206 1.25 ± 0.15 0 0 2,500 10,000 EL 1206 1.25 ± 0.20 0 0 2,500 10,000 EG 1206 1.60 ± 0.15 0 0 2,000 8,000 EH 1206 1.60 ± 0.20 0 0 2,000 8,000 FB 1210 0.78 ± 0.10 0 0 4,000 10,000 FC 1210 0.90 ± 0.10 0 0 4,000 10,000 FD 1210 0.95 ± 0.10 0 0 4,000 10,000 FE 1210 1.00 ± 0.10 0 0 2,500 10,000 FF 1210 1.10 ± 0.10 0 0 2,500 10,000 FG 1210 1.25 ± 0.15 0 0 2,500 10,000 FZ 1210 1.25 ± 0.20 0 0 2,500 10,000 FL 1210 1.40 ± 0.15 0 0 2,000 8,000 FH 1210 1.55 ± 0.15 0 0 2,000 8,000 FP 1210 1.60 ± 0.20 0 0 2,000 8,000 FM 1210 1.70 ± 0.20 0 0 2,000 8,000 FJ 1210 1.85 ± 0.20 0 0 2,000 8,000 FT 1210 1.90 ± 0.20 0 0 2,000 8,000 GA 1210 1.90 ± 0.20* 0 0 1,000 4,000 FY 1210 2.00 ± 0.20 0 0 2,000 8,000 FK 1210 2.10 ± 0.20 0 0 2,000 8,000 FS 1210 2.50 ± 0.30 0 0 1,000 4,000 NA 1805 0.90 ± 0.10 0 0 4,000 10,000 NC 1805 1.00 ± 0.15 0 0 4,000 10,000 LD 1808 0.90 ± 0.10 0 0 2,500 10,000 LF 1808 1.00 ± 0.15 0 0 2,500 10,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity¹ Plastic Quantity

10© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 2A – Chip Thickness/Tape & Reel Packaging Quantities cont. Package quantity based on finished chip thickness specifications. Thickness Code Case Size Thickness ± Range (mm) Paper Quantity Plastic Quantity 7" Reel 13" Reel 7" Reel 13" Reel GB 1812 1.00 ± 0.10 0 0 1,000 4,000 GC 1812 1.10 ± 0.10 0 0 1,000 4,000 GD 1812 1.25 ± 0.15 0 0 1,000 4,000 GE 1812 1.30 ± 0.10 0 0 1,000 4,000 GH 1812 1.40 ± 0.15 0 0 1,000 4,000 GG 1812 1.55 ± 0.10 0 0 1,000 4,000 GK 1812 1.60 ± 0.20 0 0 1,000 4,000 GJ 1812 1.70 ± 0.15 0 0 1,000 4,000 GL 1812 1.90 ± 0.20 0 0 500 2,000 GO 1812 2.50 ± 0.20 0 0 500 2,000 HB 1825 1.10 ± 0.15 0 0 1,000 4,000 HC 1825 1.15 ± 0.15 0 0 1,000 4,000 HD 1825 1.30 ± 0.15 0 0 1,000 4,000 HE 1825 1.40 ± 0.15 0 0 1,000 4,000 HF 1825 1.50 ± 0.15 0 0 1,000 4,000 JB 2220 1.00 ± 0.15 0 0 1,000 4,000 JC 2220 1.10 ± 0.15 0 0 1,000 4,000 JD 2220 1.30 ± 0.15 0 0 1,000 4,000 JE 2220 1.40 ± 0.15 0 0 1,000 4,000 JF 2220 1.50 ± 0.15 0 0 1,000 4,000 JO 2220 2.40 ± 0.15 0 0 500 2,000 KB 2225 1.00 ± 0.15 0 0 1,000 4,000 KC 2225 1.10 ± 0.15 0 0 1,000 4,000 KD 2225 1.30 ± 0.15 0 0 1,000 4,000 KE 2225 1.40 ± 0.15 0 0 1,000 4,000 Thickness Code Case Size1 Thickness ± Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity¹ Plastic Quantity

11© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 2B – Bulk Packaging Quantities Packaging Type Loose Packaging Bulk Bag (default) Packaging C -Spec1 N/A2 Case Size Packaging Quantities (pieces/unit packaging) EIA (in) Metric (mm) Minimum Maximum 0402 1005 50,000 0603 1608 0805 2012 1206 3216 1210 3225 1808 4520 20,000 1812 4532 1825 4564 2220 5650 2225 5664 1 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details. Commercial grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk bag packaging option for automotive grade products. 2 A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding anti-static Bulk Bag and automotive grade products). The 15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging.

12© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351 EIA Size Code Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2

1 Only for capacitance values ≥ 22 µF

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805, and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351). Image below based on Density Level B for an EIA 1210 case size. Y C C X X Grid Placement Courtyard Y

13© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Soldering Process Recommended Soldering Technique: Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile: KEMET’s families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), conv ection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal str ess. KEMET’s recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/ J-STD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions. Profile Feature Termination Finish SnPb 100% Matte Sn Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (T Smax) 150°C 200°C Time (tS) from TSmin to TSmax 60 – 120 seconds 60 – 120 seconds Ramp-Up Rate (T L to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 60 – 150 seconds Peak Temperature (T P) 235°C 260°C Time Within 5°C of Maximum Pe ak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-Down Rate (T P to TL) 6°C/second maximum 6°C/second maximum Time 25°C to Peak T emperature 6 minutes maximum 8 minutes maximum Note 1: All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. Time Temperature Tsmin Tsmax TL TP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tP tL ts 25°C to Peak

14© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) X7R Performance and Reliability: SMD Test Methods and Conditions Test Reference Test Condition Limits Visual and Mechanical KEMET Internal No defects that may affect performance (10X) Dimensions according KEMET Spec Sheet Capacitance (Cap) KEMET Internal C ≤ 10 µF 1 kHz ±50 Hz and 1.0 ±0.2 Vrms or 0.5 ±0.2 Vrms* C > 10 µF 120 Hz ±10 Hz and 0.5 ±0.1 Vrms * See part number specifi cation sheet for voltage Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours Please refer to a part number specifi cation sheet for referee time details Within Tolerance Dissipation Factor (DF) KEMET Internal C ≤ 10 µF Frequency: 1 kHz ±50 Hz Voltage*: 1.0 ±0.2 Vrms,0.5 ±0.2 Vrms C > 10 µF Frequency: 120 Hz ±10 Hz Voltage: 0.5 ±0.1 Vrms * See part number specifi cation sheet for voltage Within Specifi cation EIA Case Size Rated DC Voltage Capacitance Dissipation Factor (Maximum %) 0402 < 16 < 0.1 µF 5.0 ≥ 0.1 µF 10.0 < 0.1 µF 3.5 ≥ 0.1 µF 10.0 < 0.1 µF 3.5 ≥ 0.1 µF 10.0 > 25 All 2.5 0603 1 < 16 < 1.0 µF 5.0 16 / 25 3.5 > 25 2.5 < 16 ≥ 1.0 µF 10.0 0805 2 < 16 < 2.2 µF 5.0 16 / 25 3.5 > 25 < 1.0 µF 2.5 < 16 ≥ 2.2 µF 10.016 / 25 > 25 ≥ 1.0 µF 12063 < 16 < 10 µF 5.0 16 / 25 3.5 > 25 All 2.5 < 16 ≥ 10 µF 10.0 12104 < 16 < 22 µF 5.0 16 / 25 3.5 > 25 2.5 < 16 ≥ 22 µF 10.0 1805 – 2225 < 16 All 5.0 16 / 25 3.5 > 25 2.5 1 For Cap value 0.22 µF (16 V and 25 V) DF is 5% and for Cap value 4.7 µF (25 V) DF is 3.5%. 2 For Cap value 1.0 µF (16 V and 25 V) DF is 5%. 3 For Cap value 2.2 µF (25 V) and ≥ 2.2 µF (35 and 50 V) DF is 10%. For Cap Value 1.0uF 4 For Cap value 10uF (16V, 25V and 50V ) DF is 5%. For Cap value 4.7µF (50 V) DF is 5%. For

15© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) X7R Performance and Reliability: SMD Test Methods and Conditions cont. Test Reference Test Condition Limits Insulation Resistance (IR) KEMET Internal Apply rated voltage for 120 seconds at 25°C Within Specifi cation To obtain IR limit, divide MΩ - µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Insulation Resistance (IR) Limits Table EIA Case Size Rated DC Voltage 1,000 megohm microfarads or 100 GΩ 500 megohm microfarads or 10 GΩ 100 megohm microfarads or 10 GΩ 0402 ALL < 0.012 µF ≥ 0.012 µF < 0.47 µf ≥ 0.47 µf 06031 ≤ 200 V < 0.047 µF ≥ 0.047 µf < 0.47 µf ≥ 0.47 µf

250 V N/A N/A ALL

≤ 200 V < 0.15 µF ≥ 0.15 µF < 2.2 µf ≥ 2.2 µf 250 V < .027 µF N/A ≥ .027 µF 12063 ≤ 200 V < 0.47 µF ≥ 0.47 µF < 2.2 µf ≥ 2.2 µf 250 V < 0.12 µF N/A ≥ 0.12 µF 12104 ≤ 200 V < 0.39 µF ≥ 0.39 µF < 10 µf ≥ 10 µf 250 V < 0.27 µF N/A ≥ 0.27 µF

1805 ALL ALL N/A N/A

1808 ALL ALL N/A N/A

1812 ALL < 2.2 µF ≥ 2.2 µF N/A

1825 ALL ALL N/A N/A

2220 ALL < 10 µF ≥ 10 µF N/A

2225 ALL ALL N/A N/A

1 For Cap value 10 nF (≤ 100 V) IR should be calculated under 500 megohm microfarads or 10 GΩ. For Cap values 5.6nF, 6.8nF, 8.2nF & 10nF (100V) IR should be calculated under 500 megohm microfarads or 10 GΩ. 2 For Cap value 1.0µF (50 V) IR should be calculated under 100 megohm microfarads or 10 GΩ. For Cap value 0.1uF (≤ 50V ) IR should be calculated under 500 mohms or 10GOhms 3 For Cap value 4.7µF (50 V) IR should be calculated under 100 megohm microfarads or 10 GΩ. For Capacitance value 10nF (≤ 250V) IR should be calculated under 500 megohm microfarads or 10 GΩ. For Capacitance value 100nF (250V & 200V) IR should be calculated under 500 megohm microfarads or 10 GΩ. 4 For Capa value 4.7µF (50 V) IR should be calculated under 100 megohm microfarads or 10 GΩ. For Capacitance value 220nF (≤50V) IR should be calculated under 500 megohm microfarads or 10 GΩ.

16© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) X7R Performance and Reliability: SMD Test Methods and Conditions cont. Test Reference Test Condition Limits Temperature Coeﬃ cient of Capacitance (TCC) KEMET Internal C ≤ 10µF Frequency: 1 kHz ±50 Hz C > 10µF Frequency: 120 Hz ±10 Hz Voltage: 0.5 ±0.1 Vrms * See part number specifi cation sheet for voltage Step Temperature (°C) 1 +25°C 2 −55°C 3 +25°C (Reference) 4 +125°C Capacitance ±15% over −55°C to +125°C Dielectric Withstanding Voltage (DWV) KEMET Internal 250% of rated voltage (5 ±1 seconds and charge/discharge not exceeding 50 mA) Cap: Initial Limit DF: Initial Limit IR: Initial Limit Withstand test voltage without insulation breakdown or damage. Aging Rate (Maximum % Capacitance Loss/Decade Hour) KEMET Internal Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours. Please refer to a part number specifi c datasheet for referee time details. Please refer to a part number specifi cation sheet for specifi c Aging rate Terminal Strength KEMET Internal Shear stress test per specifi c case size, Time: 60±1 seconds No evidence of mechanical damage Case Size Force 0201 2N 0402 3N 0603 5N 0805 9N ≥1206 18N Board Flex AEC-Q200-005 Standard Termination system 2.0 mm Flexible Termination System 3.0 mm Test time: 60± 5 seconds Ramp time: 1 mm/second No evidence of mechanical damage

17© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) X7R Performance and Reliability: SMD Test Methods and Conditions cont. Test Reference Test Condition Limits Solderability J-STD-002 Condition: 4 hours ± 15 minutes at 155°C dry bake apply all methods Test 245 ±5°C (SnPb and Pb-Free) Visual Inspection. 95% coverage on termination. No leaching Temperature Cycling JESD22 Method JA-104 1,000 cycles (−55°C to +125°C) 2 – 3 cycles per hour Soak Time 1 or 5 minutes Measurement at 24 hours ±4 hours after test conclusion. Cap: Initial Limit DF: Initial Limit IR: Initial Limit Biased Humidity MIL-STD-202 Method 103 Load Humidity: 1,000 hours 85°C/85% RH and rated voltage. Low Volt Humidity: 1,000 hours 85C°/85% RH and 1.5 V. Measurement at 24 hours ±4 hours after test conclusion. Within Post Environmental Limits Cap: ±20% shift IR: 10% of Initial Limit DF Limits Maximum (%) Initial Post 2.5 3.0 3.5 5.0 5.0 7.5 10.0 20.0 Moisture Resistance MIL-STD-202 Method 106 Number of cycles required 10, 24 hours per cycle. Steps 7a and 7b not required. Measurement at 24 hours ±4 hours after test conclusion. Within Post Environmental Limits Cap: ±20% shift IR: 10% of Initial Limit DF Limits Maximum (%) Initial Post 2.5 3.0 3.5 5.0 5.0 7.5 10.0 20.0 Thermal Shock MIL-STD-202 Method 107 Number of cycles required 5, (−55°C to 125°C) Dwell time 15 minutes. Cap: Initial Limit DF: Initial Limit IR: Initial Limit

18© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) X7R Performance and Reliability: SMD Test Methods and Conditions cont. Test Reference Test Condition Limits High Temperature Life MIL-STD-202 Method 108 1,000 hours at 125°C with 2 X rated voltage applied excluding the following: Case Size Capacitance Applied Voltage 0603 & 0805 ≥ 1.0 µF 1.5 X 1206 & 1210 ≥ 10 µF Within Post Environmental Limits Cap: ±20% shift IR: 10% of Initial Limit DF Limits Maximum (%) Initial Post 2.5 3.0 3.5 5.0 5.0 7.5 10.0 20.0 Storage Life 1,000 hours at 125°C, Unpowered Vibration MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each of 3 orientations. Test from 10 – 2,000 Hz Cap: Initial Limit DF: Initial Limit IR: Initial Limit Mechanical Shock MIL-STD-202 Method 213 1,500 g’s 0.5 ms Half-sine, Velocity Change 15.4 feet/second (Condition F) Cap: Initial Limit DF: Initial Limit IR: Initial Limit Resistance to Solvents MIL-STD-202 Method 215 Add Aqueous wash chemical OKEMCLEAN (A 6% concentrated Oakite cleaner) or equivalent. Do not use banned solvents. Visual Inspection 10X Readable marking, no decoloration or stains. No physical damage.

19© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Storage & Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum st orage humidity not exceed 70% relative humidity. T emperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. Construction (Typical) Dielectric Material (BaTiO3) Detailed Cross Section Barrier Layer (Ni) Inner Electrodes (Ni) Barrier Layer (Ni) Inner Electrodes (Ni) Dielectric Material (BaTiO3) Termination Finish (100% Matte Sn) Termination Finish (100% Matte Sn) End Termination/ External Electrode (Cu) End Termination/ External Electrode (Cu)

20© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) These surface mount multilayer ceramic capacitors are normally supplied unmarked. If required, they can be marked as an extra cost option. Marking is available on most KEMET devices, but must be requested using the correct ordering code identifi er(s). If this option is requested, two sides of the ceramic body will be laser marked with a “K” to identify KEMET, followed by two characters (per EIA–198 - see table below) to identify the capacitance value. EIA 0603 case size devices are limited to the “K” character only. Laser marking option is not available on:

C0G, ultra stable X8R and Y5V dielectric devices.
EIA 0402 case size devices.
EIA 0603 case size devices with fl exible termination option.
KPS commercial and automotive grade stacked devices.
X7R dielectric products in capacitance values outlined below. Capacitor Marking (Optional) Marking appears in legible contrast. Illustrated below is an example of an MLCC with laser marking of “KA8”, which designates a KEMET device with rated capacitance of 100 µF. Orientation of marking is vendor optional. KEMET ID 2-Digit Capacitance Code EIA Case Size Metric Size Code Capacitance 0603 1608 ≤ 170 pF 0805 2012 ≤ 150 pF 1206 3216 ≤ 910 pF 1210 3225 ≤ 2,000 pF 1808 4520 ≤ 3,900 pF 1812 4532 ≤ 6,700 pF 1825 4564 ≤ 0.018 µF 2220 5650 ≤ 0.027 µF 2225 5664 ≤ 0.033 µF

21© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Capacitor Marking (Optional) cont. Capacitance (pF) For Various Alpha/Numeral Identifi ers Alpha Character Numeral 9 0 1 2 3 4 5 6 7 8 Capacitance (pF) A 0.10 1.0 10 100 1,000 10,000 100,000 1,000,000 10,000,000 100,000,000 B 0.11 1.1 11 110 1,100 11,000 110,000 1,100,000 11,000,000 110,000,000 C 0.12 1.2 12 120 1,200 12,000 120,000 1,200,000 12,000,000 120,000,000 D 0.13 1.3 13 130 1,300 13,000 130,000 1,300,000 13,000,000 130,000,000 E 0.15 1.5 15 150 1,500 15,000 150,000 1,500,000 15,000,000 150,000,000 F 0.16 1.6 16 160 1,600 16,000 160,000 1,600,000 16,000,000 160,000,000 G 0.18 1.8 18 180 1,800 18,000 180,000 1,800,000 18,000,000 180,000,000 H 0.20 2.0 20 200 2,000 20,000 200,000 2,000,000 20,000,000 200,000,000 J 0.22 2.2 22 220 2,200 22,000 220,000 2,200,000 22,000,000 220,000,000 K 0.24 2.4 24 240 2,400 24,000 240,000 2,400,000 24,000,000 240,000,000 L 0.27 2.7 27 270 2,700 27,000 270,000 2,700,000 27,000,000 270,000,000 M 0.30 3.0 30 300 3,000 30,000 300,000 3,000,000 30,000,000 300,000,000 N 0.33 3.3 33 330 3,300 33,000 330,000 3,300,000 33,000,000 330,000,000 P 0.36 3.6 36 360 3,600 36,000 360,000 3,600,000 36,000,000 360,000,000 Q 0.39 3.9 39 390 3,900 39,000 390,000 3,900,000 39,000,000 390,000,000 R 0.43 4.3 43 430 4,300 43,000 430,000 4,300,000 43,000,000 430,000,000 S 0.47 4.7 47 470 4,700 47,000 470,000 4,700,000 47,000,000 470,000,000 T 0.51 5.1 51 510 5,100 51,000 510,000 5,100,000 51,000,000 510,000,000 U 0.56 5.6 56 560 5,600 56,000 560,000 5,600,000 56,000,000 560,000,000 V 0.62 6.2 62 620 6,200 62,000 620,000 6,200,000 62,000,000 620,000,000 W 0.68 6.8 68 680 6,800 68,000 680,000 6,800,000 68,000,000 680,000,000 X 0.75 7.5 75 750 7,500 75,000 750,000 7,500,000 75,000,000 750,000,000 Y 0.82 8.2 82 820 8,200 82,000 820,000 8,200,000 82,000,000 820,000,000 Z 0.91 9.1 91 910 9,100 91,000 910,000 9,100,000 91,000,000 910,000,000 a 0.25 2.5 25 250 2,500 25,000 250,000 2,500,000 25,000,000 250,000,000 b 0.35 3.5 35 350 3,500 35,000 350,000 3,500,000 35,000,000 350,000,000 d 0.40 4.0 40 400 4,000 40,000 400,000 4,000,000 40,000,000 400,000,000 e 0.45 4.5 45 450 4,500 45,000 450,000 4,500,000 45,000,000 450,000,000 f 0.50 5.0 50 500 5,000 50,000 500,000 5,000,000 50,000,000 500,000,000 m 0.60 6.0 60 600 6,000 60,000 600,000 6,000,000 60,000,000 600,000,000 n 0.70 7.0 70 700 7,000 70,000 700,000 7,000,000 70,000,000 700,000,000 t 0.80 8.0 80 800 8,000 80,000 800,000 8,000,000 80,000,000 800,000,000 y 0.90 9.0 90 900 9,000 90,000 900,000 9,000,000 90,000,000 900,000,000

22© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips. 8 mm, 12 mm or 16 mm carrier tape 180 mm (7.00") or 330 mm (13.00") Anti-static reel Embossed plastic* or punched paper carrier. Embossment or punched cavity Anti-static cover t ape (0.10 mm (0.004") maximum thickness) Chip and KPS orientation in pocket (except 1825 commercial, and 1825 and 2225 Military) *EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. KEMET Bar code label Sprocket holes Table 5 – Carrier Tape Confi guration, Embossed Plastic & Punched Paper (mm) EIA Case Size Tape Size (W)* Embossed Plastic Punched Paper 7" Reel 13" Reel 7" Reel 13" Reel Pitch (P1)* Pitch (P1)* 01005 – 0402 8 2 2 0603 8 4 4 0805 8 4 4 4 4 1206 – 1210 8 4 4 4 4 1805 – 1808 12 4 4 ≥ 1812 12 8 8 KPS 1210 12 8 8 KPS 1812 and 2220 16 12 12 Array 0612 8 4 4 *Refer to Figures 1 and 2 for W and P 1 carrier tape reference locations. *Refer to Tables 6 and 7 for tolerance specifi cations.

23© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T F W Center Lines of Cavity User Direction of Unreeling Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. ØD1 ØD0 Embossment For cavity size, see Note 1 Table 4 (10 pitches cumulative tolerance on tape ±0.2 mm) Table 6 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Minimum Note 1 E1 P0 P2 R Reference Note 2 S1 Minimum Note 3 T Maximum Maximum 8 mm 1.5 +0.10/−0.0 1.0 (0.039) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004)12 mm 1.5 (0.059) (1.181)16 mm Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 4.0 ±0.10 (0.157 ±0.004) 2.5 (0.098) 8.3 (0.327) Note 512 mm Single (4 mm) and double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 ±0.05 (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) 4.6 (0.181) 12.3 (0.484) 16 mm Triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 ±0.05 (0.138 ±0.002) 12.0 ±0.10 (0.157 ±0.004) 4.6 (0.181) 16.3 (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of the embossment location and the hole location shall be applied independently of each other. 2. The tape with or without components shall pass around R without damage (see Figure 6.) 3. If S1 < 1.0 mm, there may not be enough area for a cover tape to be properly applied (see EIA Standard 481, paragraph 4.3, section b.) 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A0, B0 and K0 shall surround the component with suﬃ cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3.) (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4.) (e) for KPS product, A 0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in EIA Standard 481 for standards relating to more precise taping requirements.

24© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Figure 2 – Punched (Paper) Carrier Tape Dimensions User Direction of Unreeling Top Cover Tape T Center Lines of Cavity ØDo Po E1 F W G Cavity Size, See Note 1, Table 7 Bottom Cover Tape Bottom Cover Tape (10 pitches cumulative tolerance on tape ±0.2 mm) Table 7 – Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 E1 P0 P2 T1 Maximum G Minimum R Reference Note 2 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 0.10 (0.004) maximum 0.75 (0.030) (0.984) Variable Dimensions — Millimeters (Inches) Tape Size Pitch E2 Minimum F P1 T Maximum W Maximum A0 B0 8 mm Half (2 mm) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 2.0 ±0.05 (0.079 ±0.002) 1.1 (0.098) 8.3 (0.327) Note 1 8 mm Single (4 mm) 4.0 ±0.10 (0.157 ±0.004) 8.3 (0.327) 1. The cavity defi ned by A0, B0 and T shall surround the component with suﬃ cient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20° maximum (see Figure 3.) d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4.) e) see addendum in EIA Standard 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 6.)

26© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) Figure 6 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 8 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 20.2 (0.795)12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm (1.969) 8.4 +1.5/−0.0 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4 +2.0/−0.0 18.4 (0.724) 22.4 (0.882)

28© KEMET Electronics Corporation • One East Broward Boulevard C 1002_X7R_SMD • 8/8/2024 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) KEMET Electronics Corporation Sales Oﬃ ces For a complete list of our global sales oﬃ ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its aﬃ liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.

Product Information

C1805C106J2RACTU specifications and overview.

Summary

X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) 8/8/2024

Description

X7R Dielectric, 6.3 – 250 VDC (Commercial Grade) 8/8/2024

Source title C1805C106J2RACTU Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer