C12702-03

C12702-03 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Operates an APD with single 5 V supply (Standard type, Short-wavelengh type) 1www.hamamatsu.com Selection guide Type no. Photosensitive area (mm) Frequency bandwidth -3 dB (Hz) Type of APD Peak sensitivity wavelength (nm) C12702-03 φ1.0 4 k to 100 M Standard type 800C12702-04 φ3.0 4 k to 80 M C12702-11 φ1.0 4 k to 100 M Short-wavelength type 620C12702-12 φ3.0 4 k to 40 M Note: Gain (M) is preset to 30 prior to shipping. APD evaluationIncludes a high-sensitivity APD Uses a Hamamatsu high-sensitivity Si APD. Four types are available with different spectral response ranges and photosensitive areas. Built-in temperature-compensated bias voltage circuit controls the bias voltage with a thermosensor to keep the APD gain constant. Gain is stabilized to as low as ±2.5 % Typ. at ambient temperatures of 25 ±10 °C. Ripple noise usually inherent to high voltage power supplies is also minimized. High sensitivity detection board optimized for APD evaluation. An APD and high-speed curr ent-to-voltage amplifier circuit are mounted on a compact board. The high- speed current-to-voltage amplifier circuit features a low-noise confi guration ideal for the APD signal readout and operates at high speeds yet with high sensitivity. Easy handling Single 5 V supply operation Custom designed module available with different di- mensions and specifi cations. Spatial light transmission Bar code readers Laser radars Optical rangefi nders Optical communications Low price Compact and lightweight The circuit board is no larger than business card size, and weighs only 37 g. Features Applications

+5 V BNC connector APD Voltage controller High voltage generator +200 V +5 V High-Speed Current-to-voltage circuit Temperature monitor Structure / Absolute maximum ratings Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=5 V, unless otherwise noted) Block diagram KACCC0013EB Type No. Photosensitive area Supply voltage (V) Current consumption (mA) Board dimension Output impedance Weight Absolute maximum ratings Supply voltage Maximum Incident light level Operating temperature Topr Storage temperature Tstg C12702-03 φ1.0 +4.75 +5 +5.25 +50 +80 80 × 50 × 22 50 37 +7 10 0 to +60 -20 to +70C12702-04 φ3.0 C12702-11 φ1.0 C12702-12 φ3.0 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Photoelectric converter section (APD) High-speed amplifi er section Type No. Spectral response range λ Peak sensitivity wavelength λp Photosensitivity S M=1 (A/W) Temperature stability of gain*1 (%) (nm) (nm) λ=800 nm λ=620 nm Typ. Max. C12702-03 400 to 1000 800 0.5 - ±2.5 ±5C12702-04 C12702-11 200 to 1000 620 - 0.42C12702-12 Type No Cutoff frequency -3 dB Noise equivalent power NEP (pW/Hz1/2) Feed- back resis- tance Photoelectric sensitivity*1 including APD, M=30 (104 V/W) Minimum derection limit High band Low band λ=800 nm λ=620 nm Min. (MHz) Typ. (MHz) Min. (kHz) Typ. (kHz) Typ. Max. Typ. Max. (nW rms) C12702-03 90 100 *1: Gain is preset to 30 prior to shipping.

Photosensitivity (V/W) 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz 102 103 104 105 (Typ. Ta=25 °C, λ=λp) C12702-11 C12702-04 C12702-12 C12702-03 KACCB0340EA Spectral response Wavelength (nm) (Typ. Ta=25 °C, λ=650 nm, M=30*) Photosensitivity (A/W) 600400200 800 1000 * Measured at a reverse voltage giving a gain of 30. Incident light is 650 nm. Standard type Short-wavelength type KAPDB0262EA KACCB0020EB Gain temperature characteristic -30 10 20 30 40 50 60 Ambient temperature (°C) Gain variation (%) -20 -10 (M=30) Typ.

Response to stepped light input (C12702-03) Ta=25 °C, gain M=30, input pulse width=20 ns X-axis: 10 ns/div., Y-axis: 10 mV/div. Dimensional outline (unit: mm) 6.2 19.6 21.6 80(2.5) B 11.6 2.8 APD Photosensitive surface Power supply connecter (Supplied with cable) (MOLEX 5268-02A) 1: +5 V 2: GND Shield case (2 ×)M3 BNC Connecter for signal output Tolerance unless otherwise noted: ±0.2 (4 ×) 3.2 A Type No. C12702-03 C12702-04 C12702-11 C12702-12 A 4.7 ± 0.1 8.1 ± 0.1 4.7 ± 0.1 8.1 ± 0.1 B 0.9 ± 0.2 1.6 ± 0.2 0.8 ± 0.2 1.6 ± 0.2 KACCA0324EA

Cat. No. KACC1214E01 Dec. 2013 DN www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. Information described in this material is current as of December, 2013. APD modules C12702 series Option (sold separately) APD module FC adapter SMA adapter C12702-03 A8407-18 A8424-18 C12702-04 A8407-05A A8424-05A C12702-11 A8407-18 A8424-18 C12702-12 A8407-05A A8424-05A Precaution Accessories ∙ Power supply cable ∙ Instruction manual Attachment adapters for FC and SMA connectors Related information Precautions ∙ Notice www.hamamatsu.com/sp/ssd/doc_en.html (1) A high voltage power supply is used in this product. Do not remo ve insulating material potted on the board to prevent possible danger. (2) Be sure to terminate the output with 50 Ω when using this product.