DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Enables the evaluation of non-cooled MPPC Sensor circuit board with a socket for mounting an MPPC with leads Connection possible to MPPC with fl exible cable Equipped with a high-accuracy, high-voltage C11204-01 power supply Adjustable operating voltage and temperature com- pensation coeffi cient Selectable amplifi er usage (the default condition is use) Selectable load resistance 50 Ω or 1 kΩ Analog output
Applications
Simple initial evaluation of MPPCs Compatible MPPCs Type no. Number of channels (ch) Effective photosensitive area (mm) Pixel pitch (μm) Number of pixels S12571-010C 1 × 1 10 10000 S12571-015C 15 4489 S12572-010C 3 × 3 10 90000 S12572-015C 15 40000 S13360-1325CS 1.3 × 1.3 25 2668 S13360-1350CS 50 667 S13360-3025CS 3 × 3 25 14400 S13360-3050CS 50 3600 S13360-6025CS 6 × 6 25 57600 S13360-6050CS 50 14400 The C12332-01 is a simple evaluation starter kit for non-cooled MPPC. MPPC evaluation is possible by mounting an MPPC in the socket of the sensor circuit board. Various types of MPPCs can be evaluated. MPPC with fl exible cable (for evaluating sur- face mount type MPPC) can also be connected by using the FFC connector of the power supply circuit board. The power supply circuit board is equipped with the C11204-01, a high-accuracy, high-voltage power supply that provides the operating voltage for MPPC. It operates just by connecting to an external power supply (±5 V). It is also equipped with a USB interface that can be used to set the operating voltage and temperature compensation coef fi cient from a PC running the sup- plied sample software.
Driver circuit for MPPC C12332-01 Electrical characteristics (Ta=25 °C, Vs=±5 V, unless otherwise noted) Parameter Symbol Condition Min. Typ. Max. Unit Current consumption Is Vo=72 V, no load, when communication with a PC +5 V +36 +48 +60 mA-5 V -10 -15 -20 MPPC supply voltage range*4 Vo No load - 40 to 80 - V Setting voltage resolution*5 - - 10 - mV Setting voltage error - Vo=72 V, no load - ±10 ±40 mV Voltage monitor error - Vo=72 V, no load - ±10 - mV Current monitor error - Vo=72 V, Io=1.0 mA - ±0.05 - mA Cutoff frequency High fc When amplifier (gain: 20) is used (RL=50 Ω), -3 dB -4 0- MHzLow - DC - Mounted temperature sensor - LM94021BIMG (by Texas Instruments) - Interface* 6 - USB 2.0 (Full Speed) - *4: The MPPC operating voltage varies depending on the product. Refer to the value provided with the product. *5: When the sample software is used *6: After you set the operating voltage, remove the USB cable from the driver circuit for MPPC to eliminate any noise effects from the PC. Absolute maximum ratings Parameter Symbol Condition Specification Unit Supply voltage Vs ±5.8 V Operating temperature Topr No dew condensation *1 -20 to +60 °C Storage temperature Tstg No dew condensation *1 -20 to +80 °C *1: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Recommended operating conditions (Ta=25 °C, unless otherwise noted) Parameter Symbol Condition Min. Typ. Max. Unit Supply voltage*2 Vs ±4.75 ±5 ±5.25 V Load resistance*3 RL When amplifi er is not used - 50 or 1 k - Ω *2: Use a power supply with 300 mA or higher output. *3: The initial condition is 50 Ω. When using an amplifi er, set the load resistance to 50 Ω. KACCC0672EA USB I/F C11204-01 PC ±5 V Analog outputJumper selector Temperature sensor Socket for MPPC Sensor circuit board Power supply circuit board Amplifier (gain: 20) Block diagram
Driver circuit for MPPC C12332-01 Procedure Connect the following cables to the circuit board connectors. ∙ Power cable ∙ USB cable ∙ Signal cable ∙ Flexible fl at cable Supply power from an external source. Start the sample software, and set the operating voltage and other MPPC parameters. From the sample software, apply the MPPC operating voltage. From the sample software, disconnect the communication with the PC, remove the USB cable, and make measurements using an oscilloscope or other device. Install the driver software on the supplied CD-ROM into your PC. Then install (copy) the sample software. Connect Supply power Set parameters Apply operating voltage Measure Install the driver software and sample software Connection example Made In Japan K29-F41167 HAMAMATSUHAMAMATSU K29-F40848AK 2 9 - F 4 0 8 4 8 A L5L5 L4L4 HAMAMATSU Oscilloscope Analog signal cable Power cable (accessory) Flexible flat cable (accessory) MPPC* with flexible cable Sensor circuit board* * MPPC is sold separately. Power supply circuit board Power supply (±5 V) PC (Install the sample software.) USB cable (accessory) Note: Disconnect during measurement. HAMAMATSUHAMAMATSU KACCC0788EA
Driver circuit for MPPC C12332-01 Measurement examples [using amplifi er, gain: approx. 20x (default), RL=50 Ω] Dark state Impulse light (wavelength: 466 nm) Pulse light (wavelength: 470 nm, pulse width: 2 μs) S13360-1350CS S13360-1350CS S13360-1350CS S13360-3050CS S13360-3050CS S13360-3050CS 2 mV 200 ns GND 2 mV 200 ns GND 5 mV GND 20 ns 5 mV GND 20 ns 50 mV 500 ns GND 50 mV 500 ns
Driver circuit for MPPC C12332-01 Sample software (included) The sample software *7 is designed to simplify the MPPC evalua- tion. You can use the sample software to set the operating volt- age and temperature compensation coeffi cient. The sample soft- ware has been confi rmed to work with Microsoft .NET Framework 2.0 and later. The sample software was created on Microsoft ® Visual Basic® 2008 Express Edition SP1. *7: Compatible OS Microsoft® Windows® 7 Professional SP1 (32-bit, 64-bit) Note: Microsoft, Windows, Visual Studio, and Visual Basic are registered trademarks of Microsoft Corporation in the United States and/ or other countries.
Driver circuit for MPPC C12332-01 Dimensional outlines (unit: mm) 1.6 Analog temperature sensor Flexible cable connector (for connecting power supply circuit board) (4 ×) 2.2MPPC (5-pin) mount position MPPC (S12571-010C/-015C, S13360-1325CS/-1350CS) mount position MPPC (TO-18) mount position MPPC (S12572-010C/-015C, S13360-3025CS/-3050CS) mount position MPPC (S13360-6025CS/ -6050CS) mount position Tolerance unless otherwise noted: ±0.2 (18.1) (25.5) (5.2) Analog output connector (SMB connector) Power connector (2.9) FFC connector (for connecting MPPC with flexible cable) FFC connector (for connecting sensor circuit board) (17.5) USB connector (6.2) (10.1) 1.6 (5.6) (8.1) 32332.5 2.5 45 (6 ×) 2.2 Tolerance unless otherwise noted: ±0.2 KACCA0362EA KACCA0363EA Sensor circuit board Power supply circuit board
Driver circuit for MPPC C12332-01 Cat. No. KACC1233E01 Jul. 2015 DN www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. Information described in this material is current as of July, 2015. Accessories ∙ Power cable ∙ Operating voltage check cable ∙ USB cable ∙ Flexible flat cable (50 mm) ∙ CD-ROM (instruction manual, driver software, sample software, etc.) ∙ Quick start guide Precautions ∙ For cleaning the product, wipe using a clean, soft, dry cloth. Do not use organic solvents such as thinner and acetone. ∙ If the product and the PC are connected with a USB cable, do not remove the USB cable while the sample software is communicating. ∙ This product is a simple MPPC evaluation circuit. Do not integrate this product in your device. Related information http://www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer Options (sold separately) Coaxial conversion adapter A10613 series Coaxial conversion adapters for converting the SMB coaxial connector for extracting MPPC module signals into a BNC coaxial conn ector or an SMA coaxial connector. These adapters make connection to a BNC cable or SMA cable possible. A10613-01 (SMB-BNC) A10613-02 (SMB-SMA)