C11152 HAMAMATSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. SPECIFICATIONS

FEATURES

The C11152 series is a compact PC-board mountable high voltage power supply module, especially designed for photomultiplier tubes. The C11152 and C11152-01 output negative polarity and the C11152-50 and C11152-51 output positive polarity high voltage. GLow ripple / noise GCompact and lightweight GHigh stability GHigh voltage monitor output GVarious protective and fail-safe functions ±0.01 ±0.01 5 (>5 kHz), 8 (<=5 kHz) By external controlling voltage (0 V to +5 V) or external potentiometer (50 kΩ) +5.2 Controlling voltage × 300 120 ±0.005 0 to +5 (Output impedance 10 kΩ) TTL positive logic 0 to +50 Below 80 -20 to +60 Below 80 +15 ± 1 180 0 to -1500 -240 to -1500 130 0 to +1500 +240 to +1500 150 +15 ± 1 180 C11152-50C11152 +12 ± 0.5 220 +12 ± 0.5 220 C11152-51C11152-01 V mA V V mA mV kΩ V V ms % / °C V kΩ g Unit Input voltage Input current A Variable output voltage range Specification guaranteed output voltage range Output current Line regulation against ±1 V or ±0.5 V input change AB Load regulation against 0 % to 100 % load change A Ripple / noise (p-p) AB Output voltage control Controlling voltage input impedance Reference voltage output Output voltage setting (absolute value) Output voltage rise time (0 % ➝ 99 %) AB Temperature coefficient AB High voltage monitor output ON / OFF input ON / OFF input inpedance Operating ambient temperature AB Operating ambient humidity C Storage temperature Storage humidity C Weight Protective functions AAt maximum output voltage. BAt maximum output current. CNo condensation with no load with full load Max. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Parameter Units protected against reversed power input, reversed / excessive controlling voltage input, continuous overloading / short circuit in output

OCT. 2015. IP HIGH VOLTAGE POWER SUPPLY C11152 HAMAMATSU PHOTONICS K.K. HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TACCC0146EB TACCB0113EA CONTROLLING VOLTAGE (V) OUTPUT VOLTAGE (V) 50 1 +1800 +300 +600 +900 +1200 +1500 234 6 5.3 -1800 -300 -600 -900 -1200 -1500 OUTPUT VOLTAGE (V) (C11152, C11152-01) (C11152-50, C11152-51) TACCA0306EC Figure 1: Connection diagrams Figure 2: Output voltage controlling characteristics TACCB0138EA Figure 3: Overload characteristics Figure 4: Dimensional outline (Unit: mm) 12 3 4 5 67 +15 V or +12 V TTL logic High: HV-ON TTL logic Low : HV-OFF TTL logic High: HV-ON TTL logic Low : HV-OFF GOUTPUT VOLTAGE CONTROLLING BY EXTERNAL POTENTIOMETER GOUTPUT VOLTAGE CONTROLLING BY EXTERNAL VOLTAGE V PIN ASSIGNMENT 1Vref +5.2 V Typ. 2Vcont 3Vcont GND 4ON / OFF IN 5GND 6Vcc +15 V or +12 V 7HV MONITOR OUT 8HV OUT 9HV GND12 3 4 5 67 +15 V or +12 V V LOAD 10 kΩ 130 kΩ: C11152, C11152-01 150 kΩ: C11152-50, C11152-51 130 kΩ: C11152, C11152-01 150 kΩ: C11152-50, C11152-51

0 V to +5 V*

DON'T USE LOAD 10 kΩ 50 kΩ * The instability in the external controlling voltage should be minimized as it directly affects the output voltage quality. ** Never connect the pin number 3 and 5 directly and externally. MIN.MAX. METAL HOUSING* 2.54 2.54 × 6 16.5113.97 7.62 10.16 41.0 ± 0.5 10 5 ± 1 9 × 0.64 1234567 41.0 ± 0.5 PIN ASSIGNMENT 1Vref +5.2 V Typ. 2Vcont 3Vcont GND 4ON / OFF IN 5GND 6Vcc +15 V or +12 V 7HV MONITOR OUT 8HV OUT 9HV GND * The metal housing is internally connected to the GND. ** Never connect the pin number 3 and 5 directly and externally. OUTPUT CURRENT (A) OUTPUT VOLTAGE (V) 10-5 10-4 10-3 10-2 -1800 -300 -600 -900 -1200 -1500 OUTPUT VOLTAGE: 100 % OUTPUT VOLTAGE: 75 % OUTPUT VOLTAGE: 50 % OUTPUT VOLTAGE: 25 % +1800 +300 +600 +900 +1200 +1500 OUTPUT VOLTAGE (V) (C11152, C11152-01) (C11152-50, C11152-51)