C10439-09

C10439-07 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Integrates photodiode for precision photometry with low-noise amp www.hamamatsu.com 1 The C10439 series photodiode modules are high-precision photodetectors that integrate a photodiode and a current-to-voltage amplifi er. The output from these photodiode modules is an analog voltage and can be easily checked with a voltmeter, etc. Since their sensitivity is switchable between two ranges (High/Low), highly accurate output can be obtained by selecting the proper sensitivity range that matches the light level to be detected. Voltage output for easy handling Can be mounted on optical bench rod (M4) Two-range (High/Low) switching function Only half size of a business card Precision photometry Illuminometers Flowmeters, etc. Light source power monitors Color difference meters Fluorescence detection of printed matter Brix meter Features Applications Selection guide Type no. Photodiode type Photosensitive area (mm) Peak sensitivity wavelength (mm) Dimensions (mm) Conversion impedance Zt (V/A) Frequency bandwidth -3 dB (Hz) H range L range H range L range C10439-01 Si 2.4 × 2.4 960 19 × 46 × 52 1 × 109 1 × 107 10 1 kC10439-02 5.8 × 5.8 C10439-03 10 × 10 C10439-07 2.4 × 2.4 1 × 106 1 × 104 1 k 100 k *1 C10439-08 5.8 × 5.8 C10439-09 10 × 10 C10439-10 InGaAs φ1 1550 19 × 50 × 52C10439-11 φ3 *1: Output amplitude 2 Vp-p Recommended conditions/Absolute maximum ratings Type no. Supply voltage Vcc (V) Current consumption Icc Max. Dark state (mA) Capacitiv e load CL Min. (pF) Output resistance Zo (Ω) Absolute maximum ratings Supply voltage Vcc max (V) Operating temperature Topr*2 (°C) Storage temperature Tstg*2 (°C)Min. Max. C10439-01 ±5 ±12 ±2 500 100 ±13 0 to +50 -10 to +60 C10439-02 C10439-03 C10439-07 C10439-08 C10439-09 C10439-10 C10439-11 *2: No condensation Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings.

Photodiode modules C10439 series Electrical and optical characteristics (Ta=25 °C, Vcc=±12 V, unless otherwise noted) Type no. Spectral response range λ (nm) Peak sensitivity wavelength λp (nm) Saturation incident light level*3 (nW) Photosensitivity*3 S (mV/nW) Conversion impedance Zt (V/A) Frequency bandwidth -3 dB (Hz) H range L range H range L range H range L range H range L range C10439-01 190 to 1100 960 23.6 2360 500 5 1 × 109 1 × 107 10 1 kC10439-02 C10439-03 C10439-07 23600 2360000 0.5 0.005 1 × 10 6 1 × 104 1 k 100 k *4 C10439-08 C10439-09 C10439-10 500 to 1700 1550 11800 1180000 1 0.01C10439-11 *3: λ=λp *4: Output amplitude 2 Vp-p Type no. Maximum output amplitude VFS Output current Io=1 mA (V) Dark v oltage Vd Dark state (mV) Output noise voltage*5 Vn Dark state (mVp-p) Time drift (drift over time)*6 Dark state (mV/day) C10439-01 C10439-02 C10439-03 C10439-07 C10439-08 C10439-09 C10439-10 C10439-11 *5: Within frequency band *6: Dark voltage variation per day, measured at 25 °C after a 10-minute warm-up after power-on Block diagram KACCC0364EA PD +Vcc OUT GND -Vcc I/V conversion amplifier Rf Range selector switch

Photodiode modules C10439 series Output voltage vs. incident light level Output voltage vs. incident light level Output voltage vs. incident light level Spectral response Spectral response Spectral response Incident light level (nW) Output voltage (V) 10-3 10-2 10-1 100 101 102 103 104 (Typ. Ta=25 °C, Vcc=±12 V, λ=λp)100 0.1 0.01 High range Low range Incident light level (nW) Output voltage (V) 100 102101 103 104 105 106 107 (Typ. Ta=25 °C, Vcc=±12 V, λ=λp)100 0.1 0.01 High range Low range Incident light level (nW) Output voltage (V) 100 102101 103 104 105 106 107 (Typ. Ta=25 °C, Vcc=±12 V, λ=λp)100 0.1 0.01 High range Low range Wavelength (nm) H range photosensitivity (mV/nW) L range photosensitivity (mV/nW) 200 600400 800 1000300 700500 900 1100 (Typ. Ta=25 °C) 700 600 500 400 300 200 100 Wavelength (nm) H range photosensitivity (mV/nW) L range photosensitivity (mV/nW) 400 600 800 1000 1200 1400 1600 1800 (Typ. Ta=25 °C) 1.2 0.012 1.0 0.010 0.8 0.008 0.6 0.006 0.4 0.004 0.2 0.002 0.000 Wavelength (nm) H range photosensitivity (mV/nW) L range photosensitivity (mV/nW) 200 600400 800 1000300 700500 900 1100 (Typ. Ta=25 °C) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.007 0.006 0.005 0.004 0.003 0.002 0.001 0.000 KACCB0172EA KACCB0347EA KACCB0344EA KACCB0345EA KACCB0348EA KACCB0346EA C10439-01/-02/-03 C10439-10/-11 C10439-07/-08/-09

Photodiode modules C10439 series KACCA0204EB C10439-02/-08 12.6 14.3 14.1 High/Low range selector switch Power connector HR10A-7R-4P (73) (Hirose Electric, 4-pin, male) Output connector BNC High Low Front edge of the case to photosensitive surface 2.35 M4 depth 5 444 (2 ×) M3 depth 4 Photosensitive area 5.8 × 5.8 Dimensional outlines (unit: mm, tolerance: ±0.2 mm unless otherwise noted) KACCA0203EB C10439-01/-07 4619 Front edge of the case to photosensitive surface 2.35 444 12.614.314.1 M4 depth 5 High/Low range selector switch Output connector BNC Power connector HR10A-7R-4P (73) (Hirose Electric, 4-pin, male) (2 ×) M3 depth 4 Photosensitive area 2.4 × 2.4 High Low

Photodiode modules C10439 series KACCA0327EA C10439-10 12.614.3 14.1 Power connector HR10A-7R-4P (73) (Hirose Electric, 4-pin, male) High LowHigh/Low range selector switch Output connector BNC

34 M4 depth 5

(2 ×) M3 depth 4 Photosensitive area

1 Front edge of the

surface 2.6 KACCA0205EB C10439-03/-09 12.614.3 14.1 Power connector HR10A-7R-4P (73) (Hirose Electric, 4-pin, male) High LowHigh/Low range selector switch Output connector BNC Front edge of the case to photosensitive surface 2.35 M4 depth 5 444 (2 ×) M3 depth 4 Photosensitive area 10 × 10

Photodiode modules C10439 series Connection example KACCC0365EB KACCA0194EA Power cable (accessory) DC voltmeter, oscilloscope, etc. Power supply (±5 to ±12 V) * BNC cable is not included. GND NCPhotodiode module C10439 series Secure with optical bench rod, etc. BNC cable* Accessory

• Cable for power supply (no connector on one end) 1 m Connector HR10A-7P-4S (Hirose Electric, 4-pin, female) KACCA0328EA C10439-11 12.614.3 14.1 Power connector HR10A-7R-4P (73) (Hirose Electric, 4-pin, male) High LowHigh/Low range selector switch Output connector BNC

(2 ×) M3 depth 4 Photosensitive area

3 Front edge of the

surface 3.3

Photodiode modules C10439 series Options (sold separately, unit: mm) KACCA0330EA KACCA0332EA KACCA0329EA KACCA0331EA Optical fi ber adapter A12781 series This adapter is used to connect an optical fi ber to the photodiode module. Three connector types are available: FC, SC, and SMA. Note:

• The optical fi ber is not included.
• It may not be possible to monitor the total light level depending on the combinations of the photodiode, optical fi ber, and fi ber adapter that you are using. Select the appropriate components by carefully designing the optical system. A12781-01 (for FC type optical fiber) A12781-03 (for SMA type optical fiber) A12781-02 (for SC type optical fiber) <Assembly procedure> Fix the optical fi ber adapter in place using the M3 screw holes in the front of the case. (M3 screws are supplied with the adapter 16 82 16 14.7 2 16 9.81 2 Screw Screw

Photodiode modules C10439 series KACCA0333EA KACCA0334EA Optical fi ber (SMA type) A9511 BNC cable E2573 Signal processing unit for photodiode module C10475 This SMA type optical fi ber can be used with the photodiode module. The combination of this optical fi ber with the SMA type optical fi ber adapter (A12781-03) makes it easy to connect an optical fi ber to the photodiode module. Note: The SMA type optical fi ber adapter (A12781-03) is not included. This cable can be used to extract signals from the photodiode module. This unit converts the output from a photodiode module (C10439 series) into digital signals. High resolution digital output (16 bits) can be retrieved through a serial connection (RS-232C) from a PC. The supplied sample software can be used to easily load measurement data. For the specifi cations, refer to the C10475 datasheet. Specifications Photosensitive diameter: φ2 (bundled fiber) Photosensitive numerical aperture: 0.56 Specifications Cable specifications: 1.5E-QEV 17 ± 0.5 20 ± 0.5 1000 ± 20 5.0 ± 0.4 2.0 SMA connector (1/4-36UNS) Nylon tube Tip (aluminum alloy) 5.1 ± 0.4 +50 1000 -0 Specifications Size: 110 × 100 × 30 mm

Cat. No. KACC1139E03 Jan. 2014 DN www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. Information described in this material is current as of January, 2014. Photodiode modules C10439 series Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions

• Notice