BS05C1HFAA

BS05C MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Magnetic Pattern Recognition Sensors Standard Compact Type BS05C/N Series n Features (BS05C Series) 1. High sensitivity and excellent gap characteristics 2. Output voltage is independent of scanning speed. 3. Compact size and light weight make them ideal for downsizing. 4. Longer product life is given to BS05C series with a specially hard metal cover. 5. BS05C1HGCA has superior noise immunity against induced noise originating from motors and transformers. n Applications 1. Bank note validator 2. Magnetic ink document reader 3. Magnetic card reader 4. Magnetic gear detector 4.75–0.212.5–0.2 2.5–0.22.5–0.2 0.8 6–2 8.8–0.2 11.1–0.2 8.1–0.2 0.2 213 4 Metal cap Marking Sensing direction 3–ø0.6 Magnet Vin Vout GND F. G F. G : Frame GND 3.4–0.2 MR1 MR2 (in mm) BS05C Series n Features (BS05N Series) 1. High sensitivity and excellent gap characteristics 2. Output voltage is independent of scanning speed. 3. Compact size and light weight make them ideal for downsizing. 4. High reliability by sealing structure 5. BS05N1HGAA has superior noise immunity against induced noise originating from motors and transformers. 6. BS05N1NFAA has wider detection width of 6mm. n Applications 1. Bank note validator 2. Magnetic ink document reader 3. Magnetic card reader 4. Magnetic gear detector 5.3–0.212.5–0.2 2.5–0.22.5–0.2 0.8 6–2 8.8–0.2 11.15–0.2 8.1–0.2 0.2 213 4 Marking Sensing direction 3–ø0.6 Magnet Vin Vout GND F. G F. G : Frame GND 3.4–0.2 MR1 MR2 (in mm) BS05N Series Part Number Supply Voltage (V) Total Resistance (k ohm) Output Voltage (mVrms) Test Method Detection Width (mm) Resolution (mm) Operating Temperature Range (°C) BS05C1HFAA 5 0.5 to 4 400 min. Test Method A 3 0.75 -20 to 60 BS05C1HGCA 5 0.5 to 4 235 to 405 Test Method A 3 0.75 -20 to 60 BS05N1HFAA 5 0.5 to 4 400 min. Test Method A 3 0.75 -20 to 60 BS05N1HGAA 5 0.5 to 4 235 to 405 Test Method A 3 0.75 -20 to 60 BS05N1NFAA 5 0.6 to 6 330 min. Test Method B 6 0.87 -20 to 60 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30 Cat.No.S31E-4

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. B S05T Series n Features 1. H igh sensitivity and excellent gap characteristics 2. O utput voltage is independent of scanning speed. 3. C om pact size and light w eight m ake them ideal for dow nsizing. 4. H igher in cost perform ance 5. Superior noise im m unity against induced noise originating from m otors and transform ers. n Applications 1. Bank note validator 2. M agnetic ink docum ent reader 0.1 1.2 2.5 2.5 0.7 7.010.0–0.1 7.3–0.3 11.0

7.5 M R 2 M R 1

4.4–0.5 0.75 3.0 Sensing direction 3–ø0.6 (in m m ) +0-0.2 +0-0.2 A q r w e 45° N O TES : Space betw een pins is specified on plane A. G eneral tolerance : 0.2 qVout wVin eG N D rF·G M etal C over M R 1 M R 2 BS05T Series Part Number Supply Voltage (V) Total Resistance (k ohm) Output Voltage (mVrms) Test Method Detection Width (mm) Resolution (mm) Operating Temperature Range (°C) B S05T1H G N A 5 1 to 6 200 to 400 Test Method B 3 0.75 -20 to 60 n Test Method A 10µF 47µF +15V–5% 7805 - - + - 10µF 1kΩ 0.1µF D U T 0.1µF 22pF 1.5M Ω O U TPU T G N D -15V–5% G AIN =1,100 Fig. 1 Am plifier for O utput Voltage M easurem ent Fig. 2 Test Fixture for O utput Voltage M easurem ent 100m Arm s 60H z D U T G uide R ail D U T M ylar Film 25m m thick Acrylic Board C opper W ire #2U EW 0.1m m dia. 1. Am plifier's gain is set to 1,100 at the frequency of 60 H z. Fig. 1 show s the detail of am plifier. 2. D U T is set in the test fixture as show n in Fig. 2. 3. AC current of 100m Arm s is applied to the copper w ire. 4. Am plifier's output voltage is read w ith D M M w hile D U T is slow ly m oved along the guide rail. Continued on the following page. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Test Method B 10µF V 10µF +15V–5% 1kΩ D U T 0.1µF 22pF 1.5M Ω G N D -15V–5% G AIN =1,100 Fig. 1 Am plifier for O utput Voltage M easurem ent 47µF 0.1µF O U TPU T 100m Arm s 60H z D U T G uide R ail Fig. 2 Test Fixture for O utput Voltage M easurem ent D U T M ylar Film 25m m thick Acrylic Board C opper W ire #2U EW 0.1m m dia. 7805 1. Am plifier's gain is set to 1,100 at the frequency of 60 H z. Fig. 1 show s the detail of am plifier. 2. D U T is set in the test fixture as show n in Fig. 2. 3. AC current of 100m Arm s is applied to the copper w ire. 4. Am plifier's output voltage is read w ith D M M w hile D U T is slow ly m oved along the guide rail. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Magnetic Pattern Recognition Sensors W ide Sensing Elem ent Type n Features 1. W ide M R elem ent covering extensive area allow s increased tolerance for scanning and can accept a variety of bank notes. 2. Long product life achieved by an extrem ely hard m etal cover is ideal for use in high speed ATM and bank note counters. 3. H igh sensitivity and excellent gap characteristics 4. O utput voltage is independent of scanning speed. 5. BS05W 1KFAB is ideal for use in high-speed process m achines such as ATM and bank note counters because an extrem ely hard m etal cover is used. n Applications 1. Bank note validator 2. M agnetic ink docum ent reader G N D Vin Vout Vout Vin G N D F·G F·G 5.211–2

5.6 M arking

(10.8) 4 2.5 11–0.2 10.1–0.56–2 15˚ 15–0.2 6–2 2.52.5 4-ø0.6 Sensing direction M etal C over F. G : Fram e G N D G eneral tolerance : –0.3 M etal C over (in m m ) M R 1 M R 2 BS05W Series Part Number Supply Voltage (V) Total Resistance (k ohm) Output Voltage (mVp-p) Test Method Detection Width (mm) Resolution (mm) Operating Temperature Range (°C) B S05W 1K FA A 5 1 to 15 0.3 to 0.8 Test Method C 10 0.75 -20 to 60 B S05W 1K FA B 5 1 to 15 0.3 to 0.8 Test Method C 10 0.75 -20 to 60 n Test Method C 1. O utput voltage is m easured by using the m agnetic pattern card. The m agnetic pattern card has the sam e m agnetic density of 1000 letters on 1000 yen bank notes. 2. D rive the m agnetic pattern card and record output voltage Vp-p w ith X-Y recorder. X-Y recorder D C voltage supply D U T D riving speed : 2m m /s Pressure about 98m N Vin Vout G N D X axis : 2m m /s Y axis : 0.1m V/cm 5Vdc–0.1V (Input filter : O N ) M agnetic ink C ard R ubber roller <O utput voltage Vp-p> <M agnetic pattern> P P P=15m m 1m m Vp-p Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Magnetic Pattern Recognition Sensors M ulti-channel Type n Features 1. H igh sensitivity and excellent gap characteristics 2. O utput voltage is independent of scanning speed. 3. C om pact size and light w eight m ake them ideal for dow nsizing. 4. Sim ple and quick m ounting is possible due to one single holder for m ultiple M R elem ents. 5. BS05M 1KFC A, BS05M 1KG C A have detection w idth of 60m m , w ithout non-detection area. 6. BS05M 1KFBA, BS05M 1KFBB have detection w idth of 130m m , w ithout non-detection area. 7. BS05M 1KG C A has superior noise im m unity against induced noise originating from m otors and transform ers. n Applications 1. Bank note validator 2. M agnetic ink docum ent reader 3. M agnetic card reader G round W ire8-2.5 2–0.5 0.5 M R nb M R na P P P P P P P P 15 1 0.75 7.5 7.5 Sensing direction 3.5 (10) 1.5 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 1 1 1 1 1 1 1 1 C h1C h2C h3C h4C h5C h6C h7C h8 24-ø0.6Term inals C hannel×8, Pitch P=5, Total Pitch Tolerance–0.6 30˚ Table for W iring Elem ents G eneral Tolerance : –0.3 (in m m ) : G N D (0V) : V out (n) : V in (+5) BS05M1HFAL C H 01 25.0 4.0 C H 02 20.0 4-4.5 8-C 2.5 8-C 1 90.0 39-ø0.6 C H 01 C H 02 C H 03 C H 12 C H 13 7.3 12.5 C H 11 p p 140.0 p=10.0 – 0.15 Pitch Total Tolerance – 0.3 0.10 5.0 10 13-2.5 13-2.5 FG 18.0 27.5 38.0 14.0 12.5 18.00.15 +0.1-0.05 1–0.1 10–0.5 4~8 q q w e e w C ase M aterial : PPS M etal C over : Stainless Steel Tolerance – 0.3 (in m m ) q : Vout (n) w : Vin (+5V) e : G N D (0V) FG : Fram e G N D 3.5 +1-0 30°–5° BS05M1KFBA 39-ø0.6 C H 01 C H 02 C H 04 C H 06 C H 08 C H 10 C H 03 C H 05 C H 07 C H 09 C H 12 C H 13C H 11 p p 140.0 p=10.0 – 0.15 Pitch Total Tolerance – 0.3 0.10 5.0 13-2.5 13-2.5 FG 14.0 12.5 12.5 18.00.15 +0.10-0.05 10.0–0.51.0–0.1 4~8 q q w e e w C ase M aterial : PPS M etal C over : Stainless Steel Tolerance – 0.3 (in m m ) q : Vout (n) w : Vin (+5V) e : G N D (0V) FG : Fram e G N D 3.5 +0.1-0.0 2-30°–5° M R elem ent BS05M1KFBB C over : Stainless steel C ase : PPS G eneral tolerance : –0.3 66.0 15.0 (10.0) 5.0 120.0 2.0–0.5 7.5 0.15 1.5 3.52.5 30˚ 10.0 65.0 C H 02 C H 04 C H 05 C H 06 C H 03C H 01 6-2.56-2.5 18- ø0.6Term inals FG qe w q we q : Vout (n) w : Vin (+5V) e : G N D (0V) FG : Fram e G N D n : C hannel N o. (in m m ) BS05M1KFCA/BS05M1KGCA Part Number Supply Voltage (V) Total Resistance (k ohm) Output Voltage (mVrms) Test Method Detection Width (mm) Resolution (mm) Operating Temperature Range (°C) B S05M 1H FA L 5 0.5 to 6 150 min. Test Method D 3 x 8ch 0.75 0 to 50 B S05M 1K FB A 5 1 to 5 350 min. Test Method E 10 x 13ch 0.75 0 to 50 B S05M 1K FB B 5 1 to 5 350 min. Test Method E 10 x 13ch 0.75 0 to 50 B S05M 1K FC A 5 1 to 6 300 min. Test Method E 10 x 6ch 0.75 0 to 50 B S05M 1K G C A 5 0.5 to 6 150 min. Test Method E 10 x 6ch 0.75 0 to 50 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Test Method D 1. Am plifier's gain is set to 70dB at the frequency of 500H z. Fig. 1 show s details of am plifier. 2. D U T is set in the test fixture as show n in Fig. 2. 3. AC current of 100m Arm s is applied to the copper w ire. 4. Am plifier's output voltage is read w ith D M M w hile D U T is slow ly m oved along the guide rail. 10kΩ 1kΩ 1kΩ FG 10kΩ 10kΩ 10kΩ 100kΩ 560kΩ 330pF 1000p 100Ω 100Ω Vp(+8V) Vn(-8V) Vout Vin(+5V) 0.47µF 0.47µF µPC 317 O U T IN adj Vin=1.5V G AIN =70dB D U T 4820 4820 Fig. 2 Test Fixture for O utput Voltage M easurem ent AC 100m Arm s 500H z D U T G uide R ail D U T Spacer 0.2m m thick Acrylic Board C opper W ire #2U EW 0.1m m dia. Fig. 1 Am plifier for O utput Voltage M easurem ent n Test Method E 1. Am plifier's gain is set to 1,100 at the frequency of 60 H z. Fig. 1 show s details of am plifier. 2. D U T is set in the test fixture as show n in Fig. 2. 3. AC current of 100m A (rm s) is applied to the copper w ire. 4. Am plifier's output voltage is read w ith D M M w hile D U T is slow ly m oved along the guide rail. Fig. 2 Test Fixture for O utput Voltage M easurem ent AC 100m A (rm s) 50/60H z D U T G uide R ail D U T M ylar Film 25µm thick Acrylic Board C opper W ire #2U EW 0.1m m dia. Fig. 1 Am plifier for O utput Voltage M easurem ent D U T 10 µF 10 µF 22pF 0.1 µF O U TPU T G N D V 47 µF +15V – 5% –15V – 5% 0.1 µF 1 kΩ

1.5 M Ω

w q e 7805 G AIN =1100 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!C aution/N otice !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n !Caution (Handling) 1. This sensor generates very strong suction because this product contains a perm anent m agnet. Be careful not to apply m echanical shock w hen handling the sensor. 2. D o not place this product near m agnetic recording m edia such as m agnetic tapes or floppy disks. M agnetic recording could be dam aged. 3. D o not place this product near a person w ho has an electronic m edical device. It is very dangerous and m ay cause m alfunction of an electronic m edical device. n Notice (Storage and Operating Condition) 1. Please avoid w ater, chem ical solvent or oil. 2. Please avoid corrosive gas (C hlorine gas, H ydrogen sulfide gas, Am m onia gas, N itric oxide gas, etc.). 3. Please avoid airborne particles. 4. Please avoid strong vibration or shock. 5. Am bient tem perature change should be w ithin 1 deg. C /m in. n Notice (Rating) 1. This product is designed to detect m agnetic properties of banknotes. Please contact us w hen using this product to detect any m agnetic properties other than of banknotes. 2. Because this product contains a perm anent m agnet, m agnetic signals in w ritable m agnetic cards, such as train tickets or pre-paid cards could be dam aged. Please consult w ith us before using in such circum stances. 3. BS05M 1 series: To avoid unusual w ear of the m etal cover or jam m ing of the banknote, around 0.1m m gap betw een the sensor and the opposite m echanism s such as rollers is recom m ended to reduce the load on the m etal cover. A load of 0N is recom m ended. 4. BS05N series, BS05C series, BS05W series: Please do not apply excessive force or shock on the sensing side. W hen adhering the target m edia on the sensing side, please give the sam e level of load throughout the sensor surface and the load should be less than 0.49N . W hen a roller is set over the sensor, it should be cylindrical shape and its diam eter greater than the w idth of the sensor. If the area com ing in contact w ith the sensor is sm aller, the surface w ill be partially w orn and lead to trouble. 5. Please m ount this product w ith holder stuck firm ly on the PC B in addition to solder term inals. n Notice (Soldering and Mounting) 1. Excessive force or shock to the product should be avoided, especially to the m etal cover. 2. D o not place the product near m agnets, m oving ferrom agnetic m aterials, parts w hich generate m agnetic fields. 3. D o not place the product near high voltage lines or high current lines. 4. D o not apply excessive force, rotate or bend the term inal. 5. W iring should be avoided w hile voltage supply is active. 6. H and soldering should be applied. Soldering should be done in follow ing conditions: Soldering Tem perature: 350+/-10 deg. C less than 3 seconds or 260+/-5 deg. C less than 10 seconds. 7. Flux should be rosin w ith a chlorine content of no m ore than 0.2w t% . 8. Flux cleaning should be done by hand brushing. 9. Prevent the flux cleaning solvent from splashing on the product. Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Construction M agnetic pattern recognition sensor consists of a pair of m agnetoresistive (M R ) elem ents and a m agnet. Vin Vout G N D F-G 3 41 2 M R 1 M R 2 Sensing direction S B(KG ) 500 1,000 R (Ω ) N M agnet n Magnetoresistive Effect A change in the resistance of a ferrom agnetic or sem iconductive m aterial w hen it is subjected to m agnetic flux is illustrated in the diagram . M urata's sensor uses InSb, w hich exhibits a very high m agnetoresistive effect. n Principle of Operation W hen a m aterial printed w ith m agnetic ink is scanned over the sensor, the m agnetic flux applied to M R 1 and M R 2 changes. Thus, the sensor generates signals as indicated below . M agnet Flux Scanning M agnetic pattern 1 2 3 1/2 Vcc O utput voltage [Vout] Vcc O utput G N D M R 1 M R 2 M R 1 M R 2 n Typical Application +15V–5% O U TPU T G N D –15V–5% 0.1µF 1.5M Ω 10µF G N D Vout Sensor F. G Vin 7805 22pF 47µF 0.1µF 10µF G AIN = 1,100 1kΩ + – Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

ISO 9000 C ertifications/Part N um bering !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Plant Kanazawa Murata Mfg. Co., Ltd. Includes Nishikanazawa factory Certified Date Nov. 25,1992 Organization Reliability Center for Electronic Components of Japan Registration No. RCJ-92M-10 M anufacturer's of the products in this catalog have obtained the ISO 9000 quality system certificate. o Part Numbering (Part N um ber) qProduct ID wType eCharacteristics rIndividual Specification Code Magnetic Pattern Recognition Sensors * "(Part Number)" shows only an example which might be different from actual part number. * Any other definitions than "qProduct ID" might have different digit number from actual part number. e 1K FA B w 05W q B S r Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note S31E4.pdf 04.8.30

Note: 1. Export Control <For customers outside Japan> No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. <For customers in Japan> For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of July 2004. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 http://www.murata.com/ Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. !Note S31E4.pdf 04.8.30