BL02RN2-R62T4

BL01RN1-A62 MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 22

Technical content

Effective Frequency (MHz) Equivalent Page.1 1 10 100 1000 10000 20000 Circuit Ferrite Bead BLO 248 - 249 3-T erminal DS(S)306 250-251, 254 Capacitor DS(S/T)310/H 252 - 254 3-T erminal VFR303 255 Varistor/ DSS706 256 Capacitor DSS710 257 - 258 Block BNP 259 Filter BNX 260 - 261 Common Mode PLT 262 - 263Chokes Feed-Thru Sub Mini DF/TF 264 - 265 Capacitor TF318/H/418 266 EMC Absorber EA 267 Ferrite FS 268 CG01-I 247 EMI LEADED FILTERS TABLE OF CONTENTS Based on more than 30 years of ceramic and ferrite technology experience, Murata Electronics’ full range of leaded EMI filters have been designed to meet today’s electronic industry requirements. Murata’s leaded devices consist of ferrite bead inductors, feed-thru capacitors, 3 terminal capacitors, varistor/capacitors common mode chokes and block filters. EMI LEADED FIL TERS NEW

BL01, BL02 & BL03 Series

248 CG01-I

Ferrite beads are used for noise suppression in car radios, digital control equipment and for the prevention of spurious oscillation in radio frequency amplifiers. These ferrite bead inductors are devices which can effectively be used on printed circuit boards where high component density is essential. Taped and reeled types are also available for automatic insertion. Radial leaded units can be classified into two types — one using a single ferrite bead and the other using two ferrite beads.

FEATURES

I High component density potential I Double bead BL02RN2 types offered for more effective noise suppression I Taped and reeled radial and axial types for automatic insertion can be provided as well as ammo packaging. I Axial lead version BL01RN1-A62 available

APPLICATIONS

Micro computer, switching regulators, digital control equipment, car radios, car stereos, etc. BL 01 RN 1 – A 62 T5 BEAD BEAD TYPE MATERIAL NUMBER LEAD LEAD TAPE INDUCTOR 01 = Axial OF BEADS STYLE CODE STYLE 02 = Radial A = Axial 03 = Compact Radial R = Radial PART NUMBERING SYSTEM DIMENSIONS: mm SPECIFICATIONS RADIAL UNIT LEAD LENGTH BL01RN1-A62 BL01RN1-A62B1 BL02RN2-R62 BL02RN1-R62 BL03RN2-R62 Suffix Lead Length *R62 10.0 ± 0.8 Bulk R63 6.0 ± 0.5 R64 4.0 ± 0.8 Tape & R62-T2 16.5 ± 0.5 Reel R62-T3 20.0 ± 0.5 *R62-T4 18.5 ± 0.5 *Standard Item Characteristics Permeability (/H9262i) 550 Saturation Magnetic (Bs) 3100 (gauss) Residual Magnetic Flux Density (Brs) 1700 (gauss) Coercive Force (Hc) 0.3 (Oe) Curie Point (Tc) 130 (°C) Temp. Coefficient (/H9251/H9262r) 20 x 10 –6 Relative Loss Factor (DF//H9262i) 13 x 10–6 0.5 (MHz) Resistivity (/H9267)1 0 7 (Ohms–cm) Max. Rated Current BL01 and BL02 (A) (Bulk) 7A BL01 and BL02 (A) (Taped) 6A BL03 (Taped or Bulk) 6A CONFIGURATIONS Part Number Form /L50130BL01RN1-A62 Axial, Single bead /L50130BL01RN1-A62B1 Axial, Single bead, Bent /L50130BL01RN1-A62T5 Axial, Single bead, Taped /L50130BL01RN1-A63T6 Axial, Single bead, Taped /L50130BL02RN1-R62 Radial, Single bead /L50130BL02RN2-R62 Radial, Double bead /L50130BL02RN1-R62T4 Radial, Single bead, (Ammo) /L50130BL02RN2-R62T4 Radial, Double bead, (Ammo) /L50130BL03RN2-R62 Radial, Double bead /L50130BL03RN2-R62T4 Radial, Double bead, Ammo Operating Temperature: –25°C to +85°C /L50130Available as standard through authorized Murata Electronics Distributors. 3.60 D ± 0.15 3.6 ± 0.15 3.7 ± 1.0 9.0 max. 15.0 min. 7.5 max. 3.4 ± 0.2 45 min. 0.65 D. 0.65 0.65 D. 15.0 min. 15.0 min. 7.5 max. 7.5 max. 6.5 max. 0.65 D. 0.60 20.0 min. 20.0 min.

Item Code Dimensions: mm Pitch of Component P 12.7 Pitch of Sprocket Hole P 0 12.7 ± 0.2 Lead Spacing F 5.0 +0.8 –0.2 Length from Hole Center to Lead P 1 3.85 ± 0.7 Length from Hole Center to P2 6.35 ± 1.3Component Center BL02RN1 7.5 max. Width of Body D BL02RN2 9.0 max. BL03RN2 8.3 max. Height of Bead H BL02 7.5 max. BL03 6.5 max. Deviation along T ape, Left or Right /H9004S ±1.0 Carrier T ape Width W 18.0 ± 0.5 Position of Sprocket Hole W 1 9.0 +0 –0.5 T2= 16.5 ± 0.5 Lead Length H 1 T3= 20.0 ± 0.5 T4= 18.5 ± 0.5 Protrusion Length /H5129 +0.5 to –1.0 Diameter of Sprocket Hole D 0 4.0 ± 0.1 Lead Diameter d 0.60 ± 0.5 Total T ape Thickness t 0.7 ± 0.2 Deviation Across T ape /H9004h ±1.0 max. Portion to Cut in Case of Defect L 11.0 +0 –1.0 Hold Down T ape Width W 0 12.0 ± 0.5 Hold Down T ape Position W 2 1.5 ± 1.5 Body Thickness T BL02 3.4 ± 0.2 BL03 2.3 max. CG01-I 249 EMI LEADED FILTERS FERRITE BEAD INDUCTORS BL01, BL02 & BL03 Series Z R X Z R X Z R X TYPICAL IMPEDANCE CHARACTERISTICS TAPE DIMENSIONS: mm BL01RN1/BL02RN1 BL02RN2 BL03RN2 AXIAL LEAD TYPE BL01 SERIES BL01RN1-A62T5/A63T6 RADIAL LEAD TYPE BL02/BL03 SERIES BL02RN1-R62T4 BL02RN2-R62T4/BL03RN2-R62T4 140 120 100 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) 5.0 ± 0.5 6.0 ± 1.0 L1 – L2 /H110171.5 A62T5 = 52 +2 A63T6 = 26 +1.5 3.2 max. 1.2 max. 0.8 max. Direction of Feed 0.6 ± 0.05 * * LW 1 H 1 T t/H5129 W 2 W 0 /H9004h /H9004S P2 P H F D D 0 W LW 1 H 1 T t/H5129 W 2 W 0 /H9004h /H9004S P2 P H F D D 0 W Impedance (ohms) 140 120 100 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) Impedance (ohms) 140 120 100 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) Impedance (ohms) d d EMI LEADED FIL TERS

250 CG01-I

COMP ACT DISC-TYPE DS306 & DSS306 Series I Computer and peripherals interfaces I Compact digital equipment I Compact PPC, electronic typewriters, other electronic equipment and appliances I Helps all electronic equipment and appliances meet FCC, VDE and CISPR regulations I STD footprint for high density mounting DS /L52408306 – 55 Y5S 271 M 100 DISC TYPE FERRITE BEAD SERIES LEAD TEMPERATURE CAPACITANCE CAPACITANCE RATED Blank = None TYPE CONFIGURATION CHARACTERISTICS TOLERANCE VOL TAGE S = Inside 55 = Bulk 91 = Taped 351 = Bulk (Inside Crimp) 431 = Taped (Inside Crimp) PART NUMBERING SYSTEM Capacitor Part Number Capacitance W.V. T.C. Ferrite Dimensions Insertion –25 to +85°C Beads Loss /L50130DS306-55FZ103Z50 10000pF + 80%, –20% +30%, –85% /L50130DSS306-55FZ103N100 10000pF ± 30% +30%, –85% /L50130DSS306-55F223Z16 22000pF + 80%, –20% 16VDC +30%, –80% /L50130DSS306-351FZ103N100 10000pF ± 30% +30%, –85% /L50130DSS306-351F223Z16 22000pF + 80%, –20% 16VDC +30%, –80% SPECIFICATIONS Note: “55” in part number denotes Bulk packaging. For T aped Product, replace with appropriate number from chart on page 254. All units are rated 6 amp. /L50130Available as standard through authorized Murata Electronics Distributors.

COMP ACT DISC-TYPE DS306 & DSS306 Series DIMENSIONS: mm TYPICAL INSERTION LOSS CHARACTERISTICS DS306-55 Series Fig. 1 DS306-55 Series Fig. 4 DSS306-55 Series Fig. 2 DSS306-55 Series Fig. 5 DSS306-351 Series Fig. 3 DSS306-351 Series Fig. 6 7.0 max. 2.54 max. 8.0 max. 3 x 0.8D. Mounting Hole Mounting Hole Mounting Hole 100 120 103 222 102 271 101 470 330 0.1 1 10 100 1000 Frequency (MHz) Insertion Loss (dB) 100 120 220 223 330 220 103 222 102 471 271 151 101 470 221 0.1 1 10 100 1000 Frequency (MHz) Insertion Loss (dB) 100 120 220 221 151 330 223 103 222 102 471 271 101 470 0.1 1 10 100 1000 Frequency (MHz) Insertion Loss (dB) 2.5 ± 0.2 0.6D. 25.0 min. F1 F1 7.0 max. 2.54 max.8.0 max. 10.0 max. 3 x 0.8D. 2.5 ± 0.2 0.6D. 25.0 min. F1: 2.5 ± 0.5 5.0 ± 0.5 8.0 max. 2.54 max. 7.0 max. 3 x 0.8D. 2.5 ± 0.2 0.6D. 25.0 min. F1: 2.5 ± 0.5 5.0 ± 0.5 EMI LEADED FIL TERS

DISC-TYPE DS310/H, DST310/H & DSS310/H Series

252 CG01-I

DS /L52408310 – 55 Y5S 271 M 100 DISC TYPE FERRITE BEAD SERIES LEAD TEMPERATURE CAPACITANCE CAPACITANCE RATED Blank = None TYPE CONFIGURATION CHARACTERISTICS TOLERANCE VOLTAGE T = Outside 55 = Bulk S = Inside 91 = Taped PART NUMBERING SYSTEM Capacitor Part Number Capacitance W.V. T.C. Ferrite Dimensions Insertion –25°C to +85°C Beads Loss FOR GENERAL APPLICATIONS /L50130DS310-55Y5S271M100 270pF ± 20% 100V /L50130DS310-55Y5S222M100 2200pF ± 20% 100V ±22% None Fig. 1 Fig. 4/L50130DS310-55Y5S223S50 22000pF + 50%, –20% 50V /L50130DS310-55Y5S104M16 100000pF ± 20% 16V /L50130DST310-55Y5S271M100 270pF ± 20% 100V /L50130DST310-55Y5S222M100 2200pF ± 20% 100V ±22% External Fig. 2 Fig. 5 /L50130DST310-55Y5S223S50 22000pF + 50%, –20% 50V /L50130DSS310-55Y5S220M100 22pF ± 20% 100V /L50130DSS310-55Y5S470M100 47pF ± 20% 100V /L50130DSS310-55Y5S101M100 100pF ± 20% 100V ±22% Internal Fig. 3 Fig. 6 /L50130DSS310-55Y5S271M100 270pF ± 20% 100V /L50130DSS310-55Y5S222M100 2200pF ± 20% 100V /L50130DSS310-55Y5S223S50 22000pF + 50%, –20% 50V FOR AUDIO CIRCUITS (LOW DISTORTION TYPE) /L50130DSS310-55BL222M100 2200pF ± 20% 100V ±10% Internally Fig. 3 Fig. 9/L50130DSS310-55DL223S50 22000pF + 50%, –20% 50V +20%, –30% SPECIFICATIONS Part Number Capacitance T.C. Ferrite Dimensions* Insertion –25°C to +85°C –40°C to +105°C Beads Loss FOR HIGH TEMPERATURE APPLICATIONS /L50130DSS310H-55B222M250 Internal Fig. 3 Fig. 10 Disc-type EMIFIL DS310, DST310 and DSS310 are T-type EMI suppression filters. The disc-type EMIFIL increases the self-resonant frequency of the capacitor by attaching two lead wires to one of the electrodes of the capacitor and increases the insertion loss by adding inductance to the lead in the DST and DSS types only. Frequencies to be suppressed can be selected by choosing the capacitance. They are also recommended for use as by-pass capacitors. *Note: DS/L50482310 Series Footprint for Bulk and Tape & Reel are different. Consult your local Murata Electronics Sales Office. All DS /L50482310H units are rated at 7A max. and 250VDC. Current rating is 7Amps for bulk packaged units, 6 Amps for tape and reel. /L50130Available as standard through authorized Murata Electronics Distributors.

DISC-TYPE DS310/H, DST310/H & DSS310/H Series 1 32 1 32F2F2 1 32 F3 F3 F3 F3 F3 F3 1 3 DIMENSIONS: mm (See Note) TYPICAL INSERTION LOSS CHARACTERISTICS DS310/310H TYPE Fig. 1 DST310/310H TYPE Fig. 2 DSS310/310H TYPE Fig. 3 9.5 max. DS310 Series Fig. 4 DST310 Series Fig. 5 DSS310 Series Fig. 6 DSS310 Series Fig. 9 DS310H Fig. 7 DST310H Fig. 8 BL222/DL223 DSS310H Fig. 10 100 104 223 222 271 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 222 271 101 220 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 222 271 101 220 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 DL223 BL222 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 222 271 101 220 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 223 222 271 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 100 271 101 470 220 223 222 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) 1.5 max. 4.0 max. 10.0 max. 25.0 min. Mounting Holes 1.0 ± 0.5 1.0 ± 0.2 2.5 ± 0.2 /H92781.0 – 3 /H92781.0 – 3 /H92781.0 – 3 2.5 ± 0.2 Bulk T ape Bulk T ape Bulk T ape 0.65 D. 9.5 max. 1.5 max. 25.0 min. 4.0 max. 15.5 max. Ferrite Bead 1.25 ± 0.5 0.65 D. 12.0 max. 1.5 max. 7.5 max. 10.5 max. 25.0 min. 2.5 ± 0.5 0.65 D. 3 x 0.8 D. Mounting Holes 1.25 ± 0.2 3 x 0.8 D. Mounting Holes 2.5 ± 0.2 F1 = 5.0 ± 0.5 F2 = 2.5 ± 0.5 F3 = 2.5 ± 0.2 3 x 0.8 D. Note: DS/L50482310 Series Footprint for Bulk and T ape are different. Consult your local Murata Electronics Sales Office for details. Ferrite Bead EMI LEADED FIL TERS

254 CG01-I

TAPE & REEL DS/H11623306, DS/H116233 10/3 10H Series DST 310 – 55 Y5S 271 M 100 T = Ferrite Bead Outside Series 55 = Bulk Pkg. Temp. Cap. Tolerance Rated S = Ferrite Bead Inside 9 /L52408= Tape Char. Value Voltage (See Chart) TAPING CODES *Three types of H dimensions (lead length) are available for various types of insertion machines. PART NUMBERING, DS306 & DSS310 SERIES TAPE DIMENSIONS: mm PACKAGING TYPE AND NUMBERS Code H Straight Leads Crimped Leads Tape & Reel 91 — 20.0 92 421 16.5 93 431 18.5 Item Code Dimensions: mm Remarks Taping Pitch P 12.7 Product Inclination /L50876S Determines T olerance Guide Pitch P 0 12.7 ± 0.2 Hole Center to Lead P 1 3.85 ± 0.7 Hole Center to P2 6.35 ±1.3 Shift in Tape in Component Center Direction of Feed Diameter of Body D 8.0 [9.5] DST max. DS /L50482310 8.0 [12] DSS max. Series Deviation of Body Center /L50876S 0 ± 1.0 Width of Base Tape W 18.0 ± 0.5 Feed Hole Position to W1 9.0 Tape Widthwise ShiftCapacitor Lead Protrusion Length /H5129 +0.5 to –1.0 Diameter of Feed Hole D 0 4.0 ± 0.1 Diameter of Lead d 0.6 T otal Thickness of Tape t1 0.7 ± 0.2 Includes Thickness t2 1.5 max. of Bonding Tape Deviation Across Tape /L50876h1 1.0 max. /L50876h2 1.0 max. Length of Snipped Lead L 11.0 Width of Hold Position W 0 12.0 ± 0.5 Hold-down Tape Position W 2 1.5 ± 1.5 Lead Distance Between H 18.5 ± 1.0 16.5 & 20.0mm Lengths Reference and Bottom Planes are also available Lead Spacing F 5.0 F1 2.5 –0.5 –1.0 +0.8 –0.2 +0.4 –0.2 Part Number Quantity (Pcs.) Flat Pack Reel DS/L50482306 Series 2000 — DS310/310H Series 2000 — DST310/310H Series — 1000 /L56712 DSS310/310H Series — 800 /L56712Non Standard DS306-91 Type DS310-91 Type DSS310-91 Type (Taping for DSS type is only DSS310-91 Type) DST310-91 Type DSS306-91 Type DSS306-431 Type W W 1 W 2 W 1 D 0 P F H *8.0 max. **11.0 max. *2.54 max. **4.0 max. d D /L50876S /L50876h1 t1 t2 /L50876h2 L W W 1 W 2 W 0 F1F1 D 0 P F H /H5129 /H5129 W W 1 W 2 W 0 D 0 P F H 7.0 max. 2.54 max. d D /L50876S /L50876h1 t1 t2 /L50876h2 L /H5129 W W 1 W 2 W 0 D 0 P F H 10.0 max. 2.54 max. d D /L50876S /L50876h1 t1 t2 /L50876h2 L /H5129 W W 1 W 2 W 0 D 0 P F F1 H 11.0 max. 7 .5 max. d D /L50876S /L50876h1 t1 t2 /L50876h2 L /H5129 15.5 max. 4.0 max. d D /L50876S /L50876h1 t1 t2 /L50876h2 L

WITH SEMICONDUCTOR SURGE PROTECTION The VFR303 Series is an EMI suppression filter with a built-in varistor function designed to protect semiconductors, such as C-MOS and TTl, from ESD surge rushes. The VFR303 series works well as EMI suppression filter. I Absorbs ESD surges, provides IC protection. I Excellent signal line EMI suppression filter. I Thin and low height enables high density mounting. Elimination of noise and protection of semiconductors in office automation equipment, including computers and their peripheral equipment, copy machines, and communication terminals. PART NUMBERING SYSTEM SPECIFICATIONS Capacitance (1kHz) DC Resistance Rated Voltage Rated Current Peak Pulse Part Number (Between (Ohms) (Between (Between Varistor Current (Between Operating T erminals 1-2) (Between T erminals 1-2) T erminals 1-3) Voltage T erminals 1-2) T emp. Range T erminals 1-3) 8/20 /H9262s /L50130VFR303-351 AY 25 130pF ± 20% 150 ± 35% 25VDC 20mA 50VDC ± 20% 15A –25 to +85°C(V1mA) DIMENSIONS: mm 70 5 10 100 1000 Frequency (MHz) Insertion Loss (dB) 8.0 max. VFR303 — 351 A Y 25 SERIES PACKAGING TYPE RATED VOLTAGE Bulk = 351 Taped = 431 Terminal 5.0 ± 0.5 F1: 2.5 ± 0.5 25.0 max. 2.3 max. 5.0 max. 0.45 ± 0.1 Dia. 3 x 0.8 Dia. 2.5 ± 0.2 Standard Mounting Hole VFR303 Series /L50130Available as standard through authorized Murata Electronics Distributors. VFR303-351 TYPICAL INSERTION LOSS CHARACTERISTICS (50 Ohms – 3K Ohms) EMI LEADED FIL TERS

256 CG01-I

The DSS706 Varistor-Capacitor is a three-terminal filter which suppresses noise emission from electronic equipment while controlling incoming surges of static electricity. Its small size enables 2.5mm pitch mounting. Elimination of noise and protection of semiconductors in office automation equipment, including computers, peripheral equipment, copy machines, and communication terminals. I Protects circuits from electrical surges and acts as a filter for signal lines. I Effectively suppresses high-frequency noise from signal lines. (Performance equivalent to conventional three-terminal capacitor.) I Small size enables it to be mounted at 2.5mm pitch. Three-terminal structure leads to superior high-frequency characteristics. I Built-in ferrite bead provides excellent EMI suppression. PART NUMBERING SYSTEM SPECIFICATIONS DIMENSIONS: mm TYPICAL INSERTION LOSS CHARACTERISTICS 10.0 100.0 1000.0 Frequency (MHz) Insertion Loss (dB) 8.0 max. DSS706 — 351 D 221M 25 — 50 SERIES LEAD TEMP . CAPACITANCE RATED VARISTOR CONFIGURATION CHAR. AND VOLTAGE VOLTAGE 351 = Bulk TOLERANCE 431 = Taped F1 F1 5.0 ± 0.5 F1: 2.5 ± 0.5 25.0 min. 2.54 max. 10.5 max. 0.6 D. 3 x 0.8 2.5 ± 0.2 Mounting Hole DSS706 Series /L50130Available as standard through authorized Murata Electronics Distributors. Part Number Capacitance Capacitance Rated Max. Rated Varistor Peak Pulse Operating Temp. Char . Voltage Current Voltage Current Temp. Range /L50130DSS706-351D221M25-50 220pF ± 20% +20%, –30% 25VDC 6 Amps 50 ± 20% 100A –40 to +105°C

The DSS710 uses a capacitor element which provides the varistor function. This varistor-capacitor not only works as a bypass capacitor but also lets high-voltage surges flow to ground. The varistor-capacitor used in the DSS710 has a 3-lead structure, so that its high frequency functions are substantially better than those of conventional capacitors. Furthermore, it is combined with ferrite bead to form a T-shaped filter circuit that most effectively suppresses EMI. The DSS710 efficiently removes fast-rising transients and high-frequency EMI above 50 or 60 MHz which conventional capacitors and varistor-capacitors are incapable of removing. Varistor-capacitors are used even where conventional EMI-filters fail. They are self-healing and effective in circuits having 500-600V impulses. PART NUMBERING SYSTEM SPECIFICATIONS DIMENSIONS: mm 100 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 Frequency (MHz) Insertion Loss (dB) DSS710 D 223S 12 — 22 SERIES TEMPERATURE CAPACITANCE RATED VARISTOR CHARACTERISTICS AND VOLTAGE VOLTAGE TOLERANCE TYPICAL INSERTION LOSS CHARACTERISTICS F 10.5 max. 12.0 max. 2.5 ± 0.5 2.5 ± 0.2 Mounting Holes F = 5.0 ± 0.5 F1 = 2.5 ± 0.5 F2 = 2.5 ± 0.2 DSS710 Series /L50130Available as standard through authorized Murata Electronics Distributors. Part Number /L50130DSS710 D223 S 12-22 Capacitance 22000pF % DF 5.0% max. Insulation Resistance 1M Ohms min. IC (max.) 7 A Rated Voltage 12VDC Varistor Voltage 22VDC ± 20% (V1mA) Voltage Nonlinear Factor 1.25 max. (V10mA/V1mA) Temperature Characteristics % (–25°C to +85°C) Operating Temperature Range –40°C to +100°C Inductance 0.8/H9262H x 2 (1kHz) VOL TAGE – CURRENT CURVE 7.5 max. 2.5 max. 25.0 min. 3 x 0.8F2 F2 0.65 Voltage (V) /L52510 Current (mA) /L52510 +50 –20 +20 –30 –40 –30 –20 –10 0 10 20 30 40 300 200 100 –100 –200 –300 Note: Footprint for Bulk and Tape & Reel are different. Consult your local Murata Electronics Sales Office. EMI LEADED FIL TERS

258 CG01-I

V ARISTOR-CAP ACITORS DSS710 Series The reason the 3-terminal structure provides excellent high frequency characteristics. Bypass capacitors should logically be able to remove more noise as frequency increases. In actual fact, the electrodes and lead wires of the capacitor have series inductance as shown in Fig. 3, and this causes an LC resonance when the frequency is between 1MHz and 50MHz. As a result, when the frequency is higher than the self-resonance frequency, the noise suppression capability of the bypass capacitor is drastically reduced because the capacitor functions as inductor. To solve this problem, the DSS series has one side of the capacitor electrodes connected to two lead wires. This eliminates the series inductance to the capacitor. Furthermore, a ferrite bead is attached to each lead wire to form a T-shaped filter, thus providing efficient noise suppression. Appearance Ferrite bead: Absorbs high-frequency noise. Varistor: Bypasses high-voltage surges to ground in order to protect circuits. Capacitor: Bypasses high-frequency noise. Symbol 12-22 223S Conventional 2-Lead Capacitor 3-Lead Capacitor (DSS Series) Fig. 3 Equivalent circuit 12-22 223S M M 3-TERMINAL STRUCTURE NOISE ABSORPTION EFFECT OF V ARISTOR-CAPACITOR Waveform when a Varistor-Capacitor is not used (surge from a noise simulator). Varistor-Capacitor is used to suppress the surge shown below Waveform after the noise passes through a Varistor-Capacitor. Protection of circuitry is achieved. The Varistor-Capacitor is capable of removing even 1200V surges and will withstand 2000V impulses. SCALE: 200V/Div. 10NS/Div. Systems Lines to be connected to Effects Engine Controllers Power lines, I/O for Protection of systems from excessive voltage. Prevents ignition noise, low-frequency current lightning surges, etc. from causing malfunctions. Automobile Power lines, audio Protection of system from excessive voltage. Prevents ignition noise from Audio Equipment output lines influencing audio current. Computers Power lines, I/O lines for Protection of systems from excessive voltage. Prevents radiation and low-frequency current conduction noise. DC Motors Power lines Prevention of brush noise.

BLOCK FILTERS BNP002/004 Series Block-type BNP002 filters completely eliminate noise from extremely wide frequency bands. The BNP002 is ideal for eliminating noise in logic signal circuits and is designed to perform superbly through the use of through-type barrier layer capacitors, and bead inductors. Each block contains a number of compact EMI suppression filters. In addition, the input/output terminals and the grounding terminal are aligned in the same direction, thus permitting fast and easy assembly on any type of PC board. Noise elimination from signal lines and DC power sources in engine control units, digital equipment and computer terminals. I Since all noise in parallel signal lines can be eliminated by one filter block, minimum board space is utilized. I There are no connections in the feed-thru current circuits, thus ensuring highly reliable performance. I Both the input/output terminals and the grounding terminal are aligned in the same direction, permitting fast and easy installation on any type of PC board. I The EMIFIL BNP002 incorporates feed-thru type barrier layer capacitors in Pi circuits, obtaining significantly large insertion losses over an extremely wide frequency range — from 15MHz up to 1GHz. I The cut-off frequency is designed to be at several MHz, which is ideal for eliminating noise from any circuit in which the signal frequency and the noise frequency are relatively close together. DIMENSIONS: mm SPECIFICA TIONS EQUIVALENT CIRCUIT Item Specifications Part Number /L50130BNP002-02 /L50130BNP002-03 /L50130BNP004-02 Number of Circuits 23 2 Circuit Construction π Operating Temperature –40°C to +100°CRange Rated Voltage 50VDC Withstand Voltage 300VDC 125VDC Maximum Current 10ADCCapacity Insulation Resistance 1000M Ohms min. DC Resistance 0.05 Ohms max., (20°C to 25°C) Insertion Loss 20MHz to 500MHz: 40dB 300MHz to 1GHz (20°C to 25°C) min. 40dB min. RECOMMENDED P.C. BOARD PATTERN BNP002-02 BNP004-02 BNP002-02 BNP004-02 Capacitance value of each circuit (π) is 6600 pF min. /L50097: Ground T erminal Non-Directional BNP002-03 Top View TYPICAL INSERTION LOSS CHARACTERISTICS Insertion Loss (dB) 1 10 100 1000 Frequency (MHz) 100 Bottom View BNP002-03 /L50130Available as standard through authorized Murata Electronics Distributors. 0.6 ± 0.1 0.8 ± 0.1 2.5 ± 0.1 0.8 ± 0.1 MOUNTING HOLES Unit: mm 1.2 D. x 7 1.2 D. x 10 2.5x4=10 2.5x6=15 2.5 ± 0.1 2.5 ± 0.1 2.5 ± 0.1 12.0 max. 12.0 max. 17.0 17.0 0.8 D. 0.8 D. 3.5 ±1.0 3.5 ±1.0 BNP004 BNP002 EMI LEADED FIL TERS

B PSG CB CG

260 CG01-I

BLOCK FILTERS BNX002/003/005 Series Block-type BNX002 filters completely eliminate noise from extremely wide frequency bands. The BNX002 is perfect for use in DC power circuits and is designed to perform superbly—through the use of through-type barrier layer capacitors, monolithic chip capacitors and bead inductors. Each block contains a number of compact EMI suppression filters. In addition, the input/output terminals and the grounding terminal are aligned in the same direction, thus permitting fast and easy assembly on any type of PC board. APPLICA TIONS Noise elimination from signal lines and DC power sources in a variety of switching power sources, engine control units, digital equipment and computer terminals. I The filter is extremely compact since only one filter block is needed to completely eliminate noise from both the positive and ground lines. I There are no connections in the feed-thru current circuits, thus ensuring highly reliable performance. I Both the input/output terminals and the grounding terminal are aligned in the same direction, permitting fast and easy installation on any type of PC board. I The BNX002 incorporates feed-thru-type barrier layer capacitor and a chip capacitor which are interconnected. This combination enables the BNX002 to achieve a significantly large insertion loss throughout the extremely wide frequency range of 0.5MHz to 1GHz, which covers the AM and UHF-TV broadcast frequency bands. I Non polarized—but care must be taken to ensure that terminal with inductor on ground line faces EMI source. PSG B CG CG CG CB PSG CB CG CG CG B DIMENSIONS: mm SPECIFICA TIONS EQUIVALENT CIRCUIT Item Specifications Part Number /L50130BNX002-01 /L50130BNX003-01 /L50130BNX005-01 Operating Temperature –30°C to +85°CRange Rated Voltage 50VDC 150VDC 50VDC Test Voltage 125VDC 375VDC 125VDC Maximum Current 10ADC 15ADCCapacity Insulation Resistance 1000M Ohms min. 1MHz to 1GHz 5MHz to 1GHz 1MHz to 1GHz Insertion Loss 40dB min. 40dB min. 40dB min. 20°C to 25°C Line Impedance = 50 Ohms RECOMMENDED P.C. BOARD PA TTERN PSG: Power Supply Ground CB: Circuit B CG: Circuit Ground TOP VIEW BOTTOM VIEW T op View PCB Bottom View Filter /L50130Available as standard through authorized Murata Electronics Distributors. 5.0 ± 0.5 0.6 ± 0.1 2.5 ± 0.2 0.8 D. 7.5 ± 0.2 For 005/01 Lead Dia. is 1.0 2.5 ± 0.1 5.0 ± 0.1 7.5 ± 0.1 Ground Plane 2.5 ± 0.2 *BNX005-01 = 13.5 and 18.5 2.5 ± 0.1 2.5 ± 0.1 13.0 max.* 1.2 D.x6 18.0* max. 3.5 ±1.0

I Suppression of DC side ripple of the switching power supply I When BNX002 is not used High frequency noise, max. 0.5V, can be seen.) +5.0V/L50478 50/H9262s/DIV 0.2V/DIV I When BNX002 is used Noise can be almost eliminated by BNX002.) +5.0V/L50478 50/H9262s/DIV 0.2V/DIV CG01-I 261 EMI LEADED FILTERS EMI SUPPRESSION FILTERS BLOCK FILTERS BNX002/003/005 Series USING THE BNX SERIES EFFECTIVELY The block type filter effectively prevents unwanted reflections and external noise from entering the equipment circuitry and power lines by grounding all the high frequency components which make up the noise. To maximize performance, proper grounding is required. To insure proper grounding, observe the following points: I When designing the PC board, use all the available grounding terminals and arrange the circuit to maximize the area of the ground pattern. I Minimize the distance between the PC board ground and the filter’s grounding plate. I Insert the filter into the PC board up to the terminal roots. I Do not externally connect PSG to CG. BNX003-01 BNX002-01 BNX005-01 TYPICAL INSERTION LOSS CHARACTERISTICSAPPLICATION Insertion Loss (dB) Switching Power Supply BNX002-01 +5V CG 0.001 0.01 0.1 1 10 100 1000 Frequency (MHz) 100 EMI LEADED FIL TERS

262 CG01-I

DC COMMON MODE CHOKE COIL PLT Series Compact, lightweight, common mode choke coil for DC power supplies for common mode noise suppression from several MHz to several hundred MHz. I Ideal for suppression of common mode noise in high frequencies ranging from several MHz to several hundred MHz. I PCB mount type makes mounting simple. I Only negligible influence on 10MHz high frequency signals (PLT0R53C only). APPLICA TIONS T o meet FCC regulations on digital equipment such as computers and computer terminal equipment. T o meet VDE regulations on hand-held digital appliances using AC adapters (suppression of unwanted radiation from power cords). Suppression of radiated noise from cable between AC adapters and sets. Suppression of radiated noise from DC power supply and interface cables. /L54706 /L54709 /L54707 /L54708 /L54708/L54707 /L54706/L54709 DIMENSIONS: mm PART NUMBERING SYSTEM PLT 1R5 3 C SERIES INDUCTANCE RATED STYLE CURRENT TYPES Part Number Inductance Self-resonance Marking (/H9262H) min. Frequency (MHz)* Code /L50130PLT0R53C 0.5 1000 min. B /L50130PLT1R53C 1.5 250 A /L50130PLT2003C 20.0 10 C SPECIFICA TIONS Item Rating Rated Voltage 50VDC Rated Current 3A Withstand Voltage 125VDC (1 to 5 seconds) Operating T emp. Range –25°C to +60°C TYPICAL INSERTION LOSS CHARACTERISTICS Insertion Loss (dB) 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) /L50130Available as standard through authorized Murata Electronics Distributors. *Typical Value Symbol 0.7 Dia. 10.0 ± .5 7.5 ± .5 4.0 ± 1.0 Digital Equipment Micro Computer Equipment Power Supply Power Supply + Signal 1 Signal 2 + 5V GND + 12V GND Interface Cable PLT PLT PLT AC Adapter PLT 12.5 ± .5 max. 12.0 max. 10.0 max. N 1 : N2 = 1 : 1 N 1 N 2 M

I Extended self-resonant frequency I Meets FCC, CISPR, VCCI noise requirements I High current rating – 3A max. I High density mounting Switching power supplies, digital equipment, CTV, VCR, ECR and other electronic equipment and appliances. SPECIFICATIONS PLT09H Series /L50130Available as standard through authorized Murata Electronics Distributors. Rated Voltage 50VDC Withstand Voltage (between coils) 125VDC (1 min.) Rated Current (Amps) 3.0 Insulation Resistance 10M Ohms min. (100VDC 1 minute) DC Resistance Ohms max. 0.03 Inductance min. 20/H9262H Operating Temperature Range –40°C to +85°C Temperature Char. (Inductance) 20°C % (–25°C ~ +60°C) Insertion Loss (dB) 0.1 1 10 100 1000 Frequency (MHz) N N 1:N2 = 1:1 N 2 /L54708/L54707 /L54708/L54709 /L54708/L54709 /L54707/L54706 DIMENSIONS: mm CIRCUIT DIAGRAM 13 max.8 max. 5 ± 1 14 max. Soldering 10 ± 0.5 Unit: mm /H92780.6 max. 5 ± 0.5 TYPICAL INSERTION LOSS CHARACTERISTICS Power Supply Micro Computer Equipment Digital Equipment AC Adaptor PLT PLT PLT PLT GND GND 12V Power Supply Signal 1 Signal 2 Suppression of radiated noise from cable between AC adaptors and sets. Suppression of radiated noise from DC power supply and interface cables. +80 –50 PART NUMBERING SYSTEM /L50130PLT09H 200 3R SERIES INDUCTANCE RATED CURRENT Interface Cable EMI LEADED FIL TERS

SUBMINIATURE DF220, DF221(H), DF430, TF240(H) & DF331(H) Series

264 CG01-I

Since the input and output terminals of these feed-thru capacitors are isolated and the inductance on the grounded side is very small, they can be used effectively to very high frequencies. These devices are suitable for suppression of radiation from TV tuners, car radios, car stereos and transmission devices and provide enhanced protection from external noise sources. These subminiature feed-thrus, which may be incorporated in 2.54mm pitch connectors, are ideal for miniature electronic equipment. I The use of barrier layer capacitors has resulted in smaller size and larger capacity than possible with conventional capacitors. I The nickel alloy electrode is resistant to soldering heat and is free from migration in high humidity environments. I Compact electronic devices can be achieved by incorporating this capacitor with a 2.54mm pitch packaging density – such as installation in connectors. I Simple construction allows mass production assembly techniques. DIMENSIONS: mm DF430 DF220-00 DF221(H)-/L50542 /L50542 /L50542 TF240(H)-/L50542 /L50542 /L50542 DF331(H)-/L50542 /L50542 /L50542 Part Lead Number L1 L2 Part Lead Number L1 L2 Part Lead Solder for mounting Number L1 L2 on the chassis plate DF331(H)-812 6.5 ± 1.0 9.5 ± 1.0 Provided DF331(H)-895 6.5 ± 1.0 9.5 ± 1.0 None DF331(H)-805 14.0 ± 1.0 20.0 ± 1.0 Provided Note: Other lead wire lengths are available. Please contact your nearest Sales Office for more detail. 1.6 ± 0.2 D. 2.5 ± 0.3 3.0 ± 0.2 D. 2.5 ± 0.2 D. 2.40 max. 0.7 ± 0.3 1.0 ± 0.1 D. 2.0 ± 0.1 D. Mounting Hole 2.15 ± .04 2.5 ± 0.2 D. 2.4 max. Mounting Hole 2.0 ± 0.1 L1 L2 3.5 ± 0.5 0.7 ± 0.3 0.6 D. 2.0 ± 0.15 D. Mounting Hole L1 L2 L1 L2 2.7 ± 0.2 D. 1.2 ± 0.3 3.0 ± 0.5 4.3 ± 0.3 D. Solder for mounting on the chassis plate Available with or without solder Nickel alloy electrode 0.8 D. Mounting hole for the chassis plate Mounting Hole 3.2+0.1D.–0 1.0+0.2D.–0 2.5+.03D.–0.2 2.2+.080D.–.020 3.0 ± 0.1 D.

SUBMINIATURE DF220, DF221(H), DF430, TF240(H) & DF331(H) Series SPECIFICA TIONS Part Number* Cap. Value Cap. T ol. WVDC Insertion Loss at 25°C (Typ.) 10MHz 100MHz 1GHz DF220 /L50130DF220-00SL020U50 2pF +0, –100% 50V — — — /L50130DF220-00SL150M50 15pF ±20% 50V — — 6 /L50130DF220-00SL220M50 22pF ±20% 50V — — 7 /L50130DF220-00YN430M50 43pF ±20% 50V — 1 15 /L50130DF220-00B121M50 120pF ±20% 50V — 3 20 /L50130DF220-00B221M50 220pF ±20% 50V — 7 25 /L50130DF220-00B471M50 470pF ±20% 50V — 12 30 /L50130DF220-00E102Z50 1000pF +80, –20% 50V 3 18 35 /L50130DF220-00SS152GMV50 1500pF +200, –0% 50V 5 20 40 DF221(H) DF221-/L50482/L50482/L50482SL020U50 2pF +0, –100% 50V — — — DF221-/L50482/L50482/L50482SL150M50 15pF ±20% 50V — — 6 DF221-/L50482/L50482/L50482SL220M50 22pF ±20% 50V — — 7 DF221-/L50482/L50482/L50482YN430M50 43pF ±20% 50V — 1 15 DF221-/L50482/L50482/L50482B121M50 120pF ±20% 50V — 3 20 DF221-/L50482/L50482/L50482B221M50 220pF ±20% 50V — 7 25 DF221-/L50482/L50482/L50482B471M50 470pF ±20% 50V — 12 30 DF221(H)-/L50482/L50482/L50482E(F)102Z50 1000pF +80, –20% 50V 3 18 35 DF221-/L50482/L50482/L50482SS152GMV50 1500pF +200, –0% 50V 5 20 40 DF430 /L50130DF430-0SS332GMV50 3300pF +200, –0% 50V 10 25 45 TF240(H) TF240-/L50482/L50482/L50482SL020D50 2pF ±0.5pF 50V — — — TF240-/L50482/L50482/L50482SL220M50 22pF ±20% 50V — — 7 TF240-/L50482/L50482/L50482B331M50 330pF ±20% 50V — 10 27 TF240(H)-/L50482/L50482/L50482E(F)102GMV50 1000pF +200, –0% 50V 3 18 35 TF240-/L50482/L50482/L50482SS332Z50 3300pF +80, –20% 50V 10 25 45 DF331(H) DF331-/L50482/L50482/L50482SL010P50 1pF +100, –0% 50V — — — DF331-/L50482/L50482/L50482SL100G50 10pF ±2pF 50V — — — DF331-/L50482/L50482/L50482SL220M50 22pF ±20% 50V — — 7 DF331-/L50482/L50482/L50482SL330M50 33pF ±20% 50V — — 12 DF331-/L50482/L50482/L50482YN470M50 47pF ±20% 50V — — 15 DF331-/L50482/L50482/L50482YN101M50 100pF ±20% 50V — 2 19 DF331(H)-/L50482/L50482/L50482E(F)102GMV50 1000pF +200, –0% 50V 3 18 35 DF331-/L50482/L50482/L50482SS332GMV50 3300pF +200, –0% 50V 10 25 45

• Operating Temp. Range: Std. = –25°C to +85°C, H = –55°C to +125°C • Insulation Resistance: 1000M Ohms min. * /L50482/L50482/L50482— See DIMENSIONS For other capacitance values, consult your local Murata Electronics Sales Office. /L50130Available as standard through authorized Murata Electronics Distributors. EMI LEADED FIL TERS

Type and Dimensions Rated Voltage Temperature Characteristic Cap. Tolerance TF318–50V–ONLY TF418–300V–ONLY Nominal Capacitance Code Max. Cap. Change Temp. Range E % –25°C to +85°C Code Temp. Coefficient SL +350 to –1000ppm/°C YN –500 to –5800ppm/°C EMI LEADED FILTERS FEED-THRU CAP ACITORS TF318(H) & TF418 Series

266 CG01-I

These feed-thru capacitors are designed for high frequency requirements, by-pass applications in VHF and UHF communications equipment and noise filters for car radios, car stereos and two-way radios. These devices feature simple construction, small size and nickel plated electrodes. They are migration free and have high thermal strength, mechanical strength and resistance to soldering heat. Ease of mounting makes them ideal for new and conventional feed-thru applications. /L50482Denotes configurations shown above. Examples: TF318-450B271M50 TF418-452E102GMV300 Operating temperature: Std: –25°C to +85°C H Series: –55°C to +125°C DIMENSIONS: mm SPECIFICATIONS TF318(H)0 4.5 ± 0.3 D. 4.5 ± 0.3 D. 5.4 ± 0.2 D. 1.5 ± 0.5 1.5 ± 0.5 1.7 ± 0.5 3.0 ± 0.2 D. 3.0 ± 0.2 D. 4.0 ± 0.2 D. L1 L2 L1 L2 1.7 ± 0.1 D. Mounting Hole Chassis Mounting Hole 5.0 +0.5 –1.0 4.2 +0.1 5.0 +0.5 –1.0 5.0 +0.5 –1.0 3.2 +0.1D.–0 TF318(H)/L50482/L50482/L50482 TF418-/L50482/L50482/L50482 Type Lead Dia. L 1 L2 TF318(H)-053 1.0 TF318(H)-450 1.4 Type Lead Dia. L 1 L2 TF418-452 1.4 TF418-454 10.2 ± 1.0 13.8 ± 1.0 Part Number Cap. Cap. Tol. Temp. Rated Char. Voltage TF318-/L50482SL100G50 10pF ±20% SL 50VDC TF318-/L50482SL220M50 22pF ±20% SL 50VDC TF318-/L50482SL330M50 33pF ±20% SL 50VDC TF318-/L50482SL470M50 47pF ±20% SL 50VDC TF318-/L50482YN101M50 100pF ±20% YN 50VDC TF318-/L50482B271M50 270pF ±20% B 50VDC TF318(H)-/L50482B(F)471M50 470pF ±20% B 50VDC TF318-/L50482E102GMV50 1000pF % E 50VDC TF318-/L50482E152P50 1500pF % E 50VDC +200 +100 +20 –55 PART NUMBERING SYSTEM Part Number Cap. Cap. Tol. Temp. Rated Char. Voltage TF418-/L50482E102GMV300 1000pF % E 300VDC TF418-/L50482E152P300 1500pF % E 300VDC +200 +100 +1.0 –0.5

The EA10/EA20 series is an EMC absorber suitable for filtering from 100MHz to 20GHz. I Excellent elasticity and durability with silicon rubber I Suitable for prevention of abnormal oscillation in high frequency module, suppression of spurious spectra and interference between circuits EA1026 A 100 M /L50542/L50542/L50542 /L50542/L50542/L50542 TYPE: TYPE THICKNESS DIMENSION: DIMENSION: EMC Absorber of Absorber Width (Required) Length (Required) PART NUMBERING SYSTEM CG01-I 267 Magnetic Permeability – Reluctance (Typ.) /H92622 0.1 Frequency (MHz) 1.0 10 EA20 SERIES Reflection Loss (Typ.) Attenuation Level (dB) 02 468 1 0 1 2 1 4 1 6 1 8 2 0 Frequency (MHz) EA1075A270 EA1046A180 EA1026A180 EA1026A160 EA1026A100 EA10 SERIES Part Number Applicable Frequency Thickness (mm)(GHz) EA1026A100 20.0 1.0 EA1026A160 11.5 1.6 EA1026A180 10.0 1.8 EA1046A180 5.8 1.8 EA1075A270 2.5 2.7 EA2070A020 0.2 EA2070A050 0.1 ~ 3.0 0.5 EA2070A100 1.0 SPECIFICATIONS EMI LEADED FIL TERS

The unique FSOC ferrite cores provide high frequency EMI noise suppression for split and flat cables and find wide application in computers and peripherals to several hundreds of MHz. They are exceptionally easy to install and extremely effective. I Extremely effective EMI noise prevention I Wide application in data processing equipment I Simple installation I No soldered connections FS OC 24 0 RT SOFT SHAPE DIAMETER VARIATION MATERIAL FERRITE OC = Flat Cable Core “A” in mm PART NUMBERING SYSTEM

268 CG01-I

Impedance (Ohms) 200 100 1 5 10 50 100 500 Frequency (MHz) FSOC270RN FSOC600RN FSOC240RT FSOC400RT FSOC290PB FSOC410RN Part Number Impedance (Ohms) (100MHz) FSOC240RT 77 FSOC270RN 60 FSOC290PB 62 FSOC400RT 80 FSOC410RN 70 FSOC600RN 72 DIMENSIONS: mm SPECIFICATIONS 18.8 ± 0.5 23.8 ± 0.6 6.3 15.0 ± 0.4 1.1 8.052.15 22.25 27.0 12.4 8.72.3 24.04 29.2 16.18 40.0 ± 1.0 35.0 ± 1.0 12.0 ± 0.60.5 35.0 15.041.2 1.57.7 1.9 60.0 12.7 12.0 48.0