TARA2000-940-UW-AUT AMSCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 24
Technical content
Automotive High-Power Flood Illuminator v3-00 • 2023-Mar-28 Abstract The TARA2000-940-UW-AUT is a small form factor surface mount infrared laser illuminator enabling 2D and 3D use cases on a variety of platforms for in-cabin sensing applications.
Document Feedback TARA2000-940-UW-AUT Content Guide Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 2 Content Guide
7.1 PCB Pad Layout and Solder Mask
9 Soldering & Storage Information 18
Document Feedback TARA2000-940-UW-AUT General Description Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 3
1 General Description
1.1 Key Benefits & Features
The TARA2000-940-UW-AUT module is specifically designed for monochromatic, infrared, high- power, uniform illumination. The compact modules are assembled with ams OSRAM state-of-the-art component manufacturing processes and are reflow solderable. Those modules, using laser illumination, allow improved efficiency, reduced footprint, and overall improved system performance. Figure 1: Added Value Overview Benefits Features Small package size 4.1 mm x 4.1 mm x 1.38 mm ± 0.100 mm Power efficient High power conversion efficiency Easy component mounting Standard lead-free solder reflow compatible Uniform power distribution 100% tested for uniformity in the far field Automotive qualified AEC-Q102 standard Safety compliance ISO2626 compliant Safety ASIL level ASIL A Full traceability Unit level track with 2D barcode
1.2 Applications
- Illumination for 3D Time-of-Flight and 2D Near-Infrared Cameras for in-cabin sensing
- Gesture Recognition
- In-cabin Monitoring
- Occupants Detection
- Driver Monitoring
Document Feedback TARA2000-940-UW-AUT General Description Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 4
1.3 Block Diagram
The functional block of this device is shown below: Figure 2 : Functional Block of TARA2000-940-UW-AUT
1.4 Other General Characteristics
Some additional features of this device are shown below: Figure 3: Additional Characteristics Parameter Value Light Source VCSEL Electrical Contacts Anode/Cathode on backside Number of Electrical Contacts 1x Cathode ; 1x Anode Assembly Type Reflow Compatible
Document Feedback TARA2000-940-UW-AUT
Ordering Information
Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 5
2 Ordering Information
Ordering Code Description Delivery Form Delivery Quantity ATDA-00 TARA2000-940-UW-AUT Tape & Reel 4000 pcs/reel
Document Feedback TARA2000-940-UW-AUT Pin Assignment Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 6
3 Pin Assignment
3.1 Pin Diagram
Figure 4: Pin Diagram: Module Bottom View
3.2 Pin Description
Figure 5: Pin Description of TARA2000-940-UW-AUT Pin Number Pin Name Description
1 Anode VCSEL Power
2 Cathode VCSEL Power
Document Feedback TARA2000-940-UW-AUT Absolute Maximum Ratings Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 7
4 Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated under “Operating Conditions” is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Figure 6 Symbol Parameter Min Max Unit Comments Electrical Parameters IF,LD Laser Diode Forward Current 10 A Duty cycle = 1% Pulse width = 100 μs @ 25 ⁰C VR,LD Laser Diode Reverse 5 V DC mode @ 25 ⁰C IR,LD Laser Diode Reverse Current 25 nA DC mode @ 25 ⁰C Electrostatic Discharge ESDHBM Electrostatic Discharge HBM ± 2 kV JEDEC JS-001-2017 ESDCDM Electrostatic Discharge CDM ± 750 V JEDEC JS-002-2018 Temperature Ranges and Storage Conditions TA Operating Ambient Temperature -40 105 °C TSTRG Storage Temperature Range -40 125 °C RHNC Relative Humidity (non- condensing) 85 % MSL Moisture Sensitivity Level 3 Maximum floor life time of 168h JESD22-A113D
Document Feedback TARA2000-940-UW-AUT Performance Characteristics Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 8
5 Performance Characteristics
All limits are guaranteed. The parameters with Min and Max values are guaranteed with production tests or SQC (Statistical Quality Control) methods.
5.1 Electrical Characteristics
Figure 7: Electrical Parameters Parameter Conditions Min Typ Max Unit Optical Output Power(1) Pulse width=100 μs, Duty cycle = 2%, @ 5 A @ 25 °C 3.3 4.1 W Operating Voltage(1) Pulse width=100 μs, Duty cycle = 2%, @ 5 A @ 25 °C 1.9 2.6 V Slope Efficiency Pulse width=100 μs, Duty cycle = 2%, @ 5 A @ 25 °C 0.7 1.05 W/A Threshold Current Pulse width=100 μs, Duty cycle = 2%, @ 25 °C 0.2 1.1 A Power Conversion Efficiency Pulse width=100 μs, Duty cycle = 2%, @ 5 A @ 25 °C 31 45 % (1) Depending on driving conditions and thermal management
Document Feedback TARA2000-940-UW-AUT Performance Characteristics Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 9
5.2 Optical Characteristics
Figure 8: Optical Parameters Parameter Condition Min Typ Max Unit Global Uniformity(1) Pulse width=100 μs, Duty cycle = 2%, @ 4 A @ 25 °C -25 +25 % Wavelength Pulse width=100 μs, Duty cycle = 2%, @ 4 A @ 25 °C 932 940 948 nm Spectral Width(2) Pulse width=100 μs, Duty cycle = 2%, @ 4 A @ 25 °C 0.1 3 nm (1) Maximum deviation between average intensity in scanning windows rolling in 1º steps within the 80% intensity level. (2) Full width at half maximum. Figure 9: Field of Illumination (FOI) Parameter Condition Min Typ Max Unit Horizontal FOI(1)(2) Pulse width = 100 µs, Duty cycle = 2%, @ 4 A @ 25 °C 121.5 125.5 129.5 deg Vertical FOI(1)(2) Pulse width = 100 µs, Duty cycle = 2%, @ 4 A @ 25 °C 107.5 111.5 115.5 deg (1) Angle at 50% level normalized to the centroid. (2) Based on radiant intensity (W/sr).
Document Feedback TARA2000-940-UW-AUT Package Drawings Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 10
6 Package Drawings
The drawing below is showing the module size and tolerances of the TARA2000-940-UW-AUT module. Figure 10: Package Dimensions (1) (1) All dimensions in mm. Figure 11: Top and Bottom View
Document Feedback TARA2000-940-UW-AUT
Application Information
Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 11
7 Application Information
7.1 PCB Pad Layout and Solder Mask Recommendation
The drawing below is showing a recommendation for pad layouts and solder mask. This is only to be used as guide and not to be considered as a firm specification. Figure 12: Recommended PCB Pad Layout (top view) (1) (1) All dimensions in mm.
Document Feedback TARA2000-940-UW-AUT Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 12
7.2 Orientation of the Field of Illumination
The drawings below are showing the emitting area of the TARA2000-940-UW-AUT module. Figure 13: FOI Orientation Regarding Module Footprint (1) All dimensions in mm. Figure 14: FOI Projection (1) All dimensions in mm.
Document Feedback TARA2000-940-UW-AUT Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 13
7.3 Information on the 2D Barcode
The figure below shows the 2D barcode on the module that can be used for traceability purpose. The 2D barcode has 14 characters and contains the following information:
- Optics Lot number
- Year / Month / Day of manufacturing
- Lot running number and row & column coordinates located in the wafer
- Build type
- Configuration details The module lot number can be traced back through module traceability report by referencing to the optics lot number. Figure 15: 2D Barcode Location on the Module
Document Feedback TARA2000-940-UW-AUT Tape & Reel Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 14
8 Tape & Reel Information
8.1 Overview
Sampling Shipments: The modules are shipped in tape & reel MP Shipments: The modules are shipped in tape & reel Figure 16: Carrier Tape Dimensions and Overview (1)(2)(3) (1) Cover tape dimensions are 9.3 mm. (2) Device pin 1 oriented towards tape holes. (3) Reference material: Polystyrene carrier and Polyester clear tape.
Document Feedback TARA2000-940-UW-AUT Tape & Reel Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 15
8.2 Plastic Reel & MBB Bag
Reels are individually labeled and put inside a Moisture Barrier Bag (MBB). The label information is as follows:
- Part number
- Lot number
- Date code manufacturing
- Manufacturing country
- Expire date
- VCSEL batch
- Quantity
- Supplier information Figure 17: Shipping Label Example
Document Feedback TARA2000-940-UW-AUT Tape & Reel Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 16
8.3 MSL Label
The Moisture Sensitivity Level information is mentioned in the MBB Bag as shown in the figure below. Figure 18: MSL Label Example on MBB Bag
Document Feedback TARA2000-940-UW-AUT Tape & Reel Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 17
8.4 Label at Outer Box
The outer box containing all the plastic reels contain information as shown in the figure below. Figure 19: Label at Outer Box Example
Document Feedback TARA2000-940-UW-AUT Soldering & Storage Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 18
9 Soldering & Storage Information
9.1 Soldering Information
The TARA2000-940-UW-AUT modules have been tested for lead-free solder reflow compatibility with peak temperatures up to 260 °C. Although an example reflow profile is provided in the following figure, the exact reflow profile may depend on exact solder used. Figure 20: Solder Reflow Profile Graph Example (for reference only) Attention
- It is not advised to proceed to cleaning after SMT reflow process.
- The modules MUST NOT be cleaned using ultrasonic cleaning.
- We suggest to use “no clean solder paste” and not to clean after SMT.
- In case a cleaning is un-avoidable, rinse with DI water, followed by a 2h bake @70 °C.
Document Feedback TARA2000-940-UW-AUT Soldering & Storage Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 19
9.2 Storage Information
Moisture sensitivity optical characteristics of the device can be adversely affected during the soldering process by the release and vaporization of moisture that has been previously absorbed into the package. To ensure the package contains the smallest amount of absorbed moisture possible, each device is baked prior to being dry packed for shipping. Devices are dry packed in a sealed aluminized envelope called a moisture-barrier bag with silica gel to protect them from ambient moisture during shipping, handling, and storage before use.
9.3 Shelf Life
The calculated shelf life of the device in an unopened moisture barrier bag is 12 months from the date code on the bag when stored under the following conditions:
- Shelf Life: 12 months
- Ambient Temperature: <40°C
- Relative Humidity: <90% Rebaking of the devices will be required if the devices exceed the 12 month shelf life and the Humidity Indicator Card shows that the devices were exposed to conditions beyond the allowable moisture region.
9.4 Floor Life
The module has been assigned a moisture sensitivity level of MSL 3. As a result, the floor life of devices removed from the moisture barrier bag is 168 hours from the time the bag was opened, provided that the devices are stored under the following conditions:
- Floor Life: 168 hours
- Ambient Temperature: <30°C
- Relative Humidity: <60% If the floor life or the temperature/humidity conditions have been exceeded, the devices must be rebaked prior to solder reflow or dry packing.
9.5 Rebaking Instructions
When the shelf life or floor life limits have been exceeded, rebaking is required based on recommended baking conditions (7h at 105 °C).
Document Feedback TARA2000-940-UW-AUT Handling Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 20
10 Handling
10.1 Pick Up
Recommended pick up position on the top window (hatched area in the figure), touching directly the glass. Figure 21: Pick Up Location (1) (1) All dimensions in mm.
Document Feedback TARA2000-940-UW-AUT Appendix Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 21
11 Appendix
11.1 RoHS Compliance
The TARA2000-940-UW-AUT module is RoHS compliant.
11.2 Safety Advice
Depending on the operational use of the device, the modules can emit highly concentrated non-visible infrared light, which can be hazardous to the human eyes. Products incorporating these modules may have to follow the safety precautions described by IEC 60825-1 and IEC 62471. This product emits infrared radiation and has not yet been classified under IEC 60825-1. All appropriate safety precautions should be exercised in the operation and use of this product. CAUTION
- Avoid direct eye exposure except as may be determined and directed by purchaser.
- Appropriate protective eyewear should be worn when operating.
- Use of magnifying optical instruments with this component may increase eye hazard.
- Avoid obstructing fully the optical path, due to risk for the lens to melt and cause eye hazard.
- Obstructing, redirecting or focusing the optical power back to the module is considered a device misuse and can potentially lead to a health hazard. LASER PRODUCT LASER RADIATION – AVOID DIRECT EYE EXPOSURE WAVELENGTH: 940nm MAXIMUM OUTPUT POWER: Depends on drive mode WEAR PROTECTIVE GLASSES
Document Feedback TARA2000-940-UW-AUT Appendix Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 22
11.3 Symbols and Abbreviations
Figure 21: Symbols and Abbreviations Used in the Datasheet Symbol/Abbreviation Description DI Deionized FOI Field of Illumination FWHM Full Width at Half Maximum ID Identification IR Infrared LD Laser Diode LI Light-Current LIV Light-Current-Voltage MP Mass Production MSL Moisture Sensitivity Level RoHS Restriction of Hazardous Substances SMT Surface Mount Technology VCSEL Vertical Cavity Surface Emitting Laser
Document Feedback TARA2000-940-UW-AUT Revision Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 23 Document Status Product Status Definition Product Preview Pre-Development Information in this datasheet is based on product ideas in the planning phase of development. All specifications are design goals without any warranty and are subject to change without notice Preliminary Datasheet Pre-Production Information in this datasheet is based on products in the design, validation or qualification phase of development. The performance and parameters shown in this document are preliminary without any warranty and are subject to change without notice Datasheet Production Information in this datasheet is based on products in ramp-up to full production or full production which conform to specifications in accordance with the terms of ams-OSRAM AG standard warranty as given in the General Terms of Trade Datasheet (discontinued) Discontinued Information in this datasheet is based on products which conform to specifications in accordance with the terms of ams-OSRAM AG standard warranty as given in the General Terms of Trade, but these products have been superseded and should not be used for new designs Changes from previous version to current revision v3-00 Page Document security class changed from “Confidential” to “Public”
- Page and figure numbers for the previous version may differ from page and figure numbers in the current revision.
- Correction of typographical errors is not explicitly mentioned.
Document Feedback TARA2000-940-UW-AUT Legal Information Datasheet • PUBLIC DS000688 • v3-00 • 2023-Mar-28 24 │ 24
13 Legal Information
Copyrights & Disclaimer Copyright ams-OSRAM AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Devices sold by ams-OSRAM AG are covered by the warranty and patent indemnification provisions appearing in its General Terms of Trade. ams-OSRAM AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams-OSRAM AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams-OSRAM AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams-OSRAM AG for each application. This product is provided by ams-OSRAM AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams-OSRAM AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams-OSRAM AG rendering of technical or other services. RoHS Compliant & ams Green Statement RoHS Compliant: The term RoHS compliant means that ams-OSRAM AG products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories plus additional 4 substance cate gories (per amendment EU 2015/863), including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, RoHS compliant products are suitable for use in specified lead -free processes. ams Green (RoHS compliant and no Sb/Br/Cl): ams Green defines that in addition to RoHS compliance, our products are free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) and do not contain Chlorine (Cl not exceed 0.1% by weight in homogeneous material). Important Information: The information provided in this statement represents ams-OSRAM AG knowledge and belief as of the date that it is provided. ams-OSRAM AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams-OSRAM AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams-OSRAM AG and ams-OSRAM AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Headquarters ams-OSRAM AG Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe Tel: +43 (0) 3136 500 0 Please visit our website at www.ams.com Buy our products or get free samples online at www.ams.com/Products Technical Support is available at www.ams.com/Technical-Support Provide feedback about this document at www.ams.com/Document-Feedback For sales offices, distributors and representatives go to www.ams.com/Contact For further information and requests, e-mail us at ams_sales@ams.com