ASW204_17 ASB | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 16
Technical content
1/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier (Supply Voltage = +5 V, TA = +25 C, Z0 = 50 ) Parameters Units Typical Frequency MHz 900 2000 2700 3500 5500 S11 dB -13 -14 -18 -15 -7 S22 dB -13 -12 -10 -10 -14 Output P1dB dBm 21 21 20 17 15 Current mA 55 55 55 55 55 Device Voltage V +5 +5 +5 +5 +5 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Parameters Units Min Typ Max Testing Frequency MHz 2000 Gain dB 18 S11 dB -14 S22 dB -12 Output IP3 dBm 32.5 Noise Figure dB 1.75 Output P1dB dBm 21 Current mA 55 Device Voltage V +5 Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +6 V Operating Junction Temperature +150 C Input RF Power (Continuous) +22 dBm Thermal Resistance 98 C/W Features Description Typical Performance Absolute Maximum Ratings 18 dB Gain at 2000 MHz 21 dBm P1dB at 2000 MHz 32.5 dBm OIP3 at 2000 MHz 1.75 dB NF at 2000 MHz MTTF > 100 Years Single Supply The ASW204, a power amplifier MMIC, has a high linearity, high gain, and high efficiency over a wide range of frequency, being sui table for use in both receiver and transmitter of telecommunication sy s- tems up to 8 GHz. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests. Application Circuit 500 ~ 3500 MHz SMATV, DVB-S (50 ) SMATV(75 ) - 950 ~ 2150 MHz - 200 ~ 2600 MHz 500 ~ 3500 MHz (5.3 V) IF (50 ~ 450 MHz) 500 ~ 6000 MHz (Flat Gain) 5000 ~ 6000 MHz 500 ~ 2700 MHz (3.3 V/ 35 mA) 40 ~ 2400 MHz Product Specifications ASW204 Pin Configuration Pin No. Function
1 RF IN
2 GND
3 RF OUT & Bias
2/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Pin No. Function Mounting Recommendation (In mm) Outline Drawing Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via hole s be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 L 0.89 1.04 1.20 b 0.36 0.42 0.48 b1 0.41 0.47 0.53 C 0.38 0.40 0.43 D 4.40 4.50 4.60 D1 1.40 1.60 1.75 E 3.64 --- 4.25 E1 2.40 2.50 2.60 e1 2.90 3.00 3.10 H 0.35 0.40 0.45 S 0.65 0.75 0.85 e 1.40 1.50 1.60 ASW204 Pxxxx Lot No. Part No. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow ESD Classification & Moisture Sensitivity Level
3/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 19.8 18.0 16.7 15.0 Magnitude S11 (dB) -13 -14 -18 -15 Magnitude S22 (dB) -13 -12 -10 -10 Output P1dB (dBm) 21 21 20 17 Output IP31) (dBm) 32.0 32.5 32.5 28.0 Noise Figure (dB) 1.65 1.75 2.00 2.30 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 Wide Band 500 ~ 3500 MHz +5 V C1=56 pF L1=33 nH C2=56 pF Vcc=5 V RF IN RF OUT C3=100 pF ASW204 L2=33 nH C4=1 F 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c
4/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Gain vs. Temperature Current vs. Temperature Output IP3 vs. Tone Power (Frequency=2000 MHz) P1dB vs. Temperature -60 -40 -20 0 20 40 60 80 100 100 120 Current (mA) Temperature ( o Frequency = 2000 MHz -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 2000 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 2000 MHz 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c
5/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 0 2 4 6 8 10 12 Output Power (dBm) -70 -65 -60 -55 -50 -45 -40 ACLR (dBc)
20 MHz BW
10 MHz BW
1) Test Source : LTE_FDD_test model 3.1, BW: 10 MHz & 20 MHz, Test Frequency: 2.6 GHz 2) Test Source : LTE_FDD_test model 3.1, BW: 20 MHz, Test Frequency: 2.6 GHz LTE ACLR – 10 MHz & 20 MHz LTE ACLR – 20 MHz
6/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 950 2150 Magnitude S21 (dB) 19.8 17.7 Magnitude S11 (dB) -14 -12 Magnitude S22 (dB) -13 -11 Output P1dB (dBm) 21.5 22.5 Output IP31) (dBm) 32 31 Noise Figure (dB) 1.7 1.8 Device Voltage (V) +5 +5 Current (mA) 55 55 SMATV. DVB-S (50 ) 950 ~ 2150 MHz +5 V C1=56 pF L1=33 nH C2=56 pF Vcc=5 V RF IN RF OUT C3=100 pF ASW204 L2=33 nH C4=1 F 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 0 500 1000 1500 2000 2500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
7/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier C1=56 pF L1=33 nH C2=56 pF Vcc=5 V RF IN RF OUT C3=100 pF ASW204 L2=82 nH C4=1 F 0 500 1000 1500 2000 2500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 Stability Factor Frequency [MHz] 1) OIP3 is measured with two tones at an output power of +5 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 950 2150 Magnitude S21 (dB) 19.7 17.6 Magnitude S11 (dB) -13 -16 Magnitude S22 (dB) -8.5 -10 Output P1dB (dBm) 22 22 Output IP31) (dBm) 33.0 32.5 Noise Figure (dB) 1.7 1.8 Device Voltage (V) +5 +5 Current (mA) 55 55 SMATV(75 ) 950 ~ 2150 MHz +5 V
8/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 0 500 1000 1500 2000 2500 3000 Stability Factor Frequency [MHz] 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 200 950 2150 2600 Magnitude S21 (dB) 21.0 20.0 17.3 16.6 Magnitude S11 (dB) -20 -13 -18 -20 Magnitude S22 (dB) -7.0 -8.0 -9.0 -9.0 Output P1dB (dBm) 22 21 21 20 Output IP31) (dBm) 29 33 32 31 Noise Figure (dB) 1.8 1.3 1.6 1.8 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 SMATV(75 ) 200 ~ 2600 MHz +5 V 0 500 1000 1500 2000 2500 3000 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
9/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 20.2 18.3 17.0 15.2 Magnitude S11 (dB) -15 -15 -20 -15 Magnitude S22 (dB) -12 -12 -10 -10 Output P1dB (dBm) 22.5 22.5 21.5 17.0 Output IP31) (dBm) 34.5 34.0 33.5 29.5 Noise Figure (dB) 1.7 1.8 2.0 2.4 Device Voltage (V) +5.3 +5.3 +5.3 +5.3 Current (mA) 75 75 75 75 Wide Band 500 ~ 3500 MHz +5.3 V C1=56 pF L1=33 nH C2=56 pF Vcc=5.3 V RF IN RF OUT C3=100 pF ASW204 L2=33 nH C4=1 F 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)
10/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone sep a- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 70 150 300 Magnitude S21 (dB) 22.5 21.0 20.0 Magnitude S11 (dB) -5 -8 -10 Magnitude S22 (dB) -15 -15 -15 Output P1dB (dBm) 21.5 21.5 21.5 Output IP31) (dBm) 29.5 29.5 31.0 Noise Figure (dB) 1.9 1.6 2.0 Device Voltage (V) +5 +5 +5 Current (mA) 55 55 55 IF 50 ~ 450 MHz +5 V RF IN RF OUT ASW204 L1=1 Vcc=5 V C3=100 pF C4=1 F L2=680 nH 0 100 200 300 400 500 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)
11/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +5(1) / +0(2) / -5(3) dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 500 2000 4000 6000 Magnitude S21 (dB) 16.1 15.2 15.2 11.4 Magnitude S11 (dB) -13 -11 -15 -8 Magnitude S22 (dB) -6 -6 -8 -4 Output P1dB (dBm) 21.0 21.0 13.5 8.5 Noise Figure (dB) 2.8 2.2 2.9 3.3 Device Voltage (V) +5 +5 +5 +5 Current (mA) 55 55 55 55 0 1000 2000 3000 4000 5000 6000 7000 Gain (dB) Frequency (MHz) 0 1000 2000 3000 4000 5000 6000 7000 -20 -15 -10 S11 (dB) Frequency (MHz) 0 1000 2000 3000 4000 5000 6000 7000 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) C1=56 pF L1=27 nH C2=56 pF Vcc=5 V RF IN RF OUT C4=100 pF ASW204 L2=27 nH C5=1 F C3=86 pFR1=560 Flat Gain 500 ~ 6000 MHz +5 V
12/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power o f +0 dBm/tone sep a- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 5000 5500 6000 Magnitude S21 (dB) 13.2 12.8 12.0 Magnitude S11 (dB) -7 -7 -7 Magnitude S22 (dB) -10 -14 -15 Output P1dB (dBm) 15.0 15.0 14.5 Output IP31) (dBm) 27.0 28.0 25.5 Noise Figure (dB) 2.9 2.9 3.1 Device Voltage (V) +5 +5 +5 Device Current (mA) 55 55 55 WLAN 5000 ~ 6000 MHz +5 V C1=10 pF L1=5.6 nH C2=10 pF Vcc=5 V RF IN RF OUT C3=100 pF ASW204 L2=12 nH C4=1 F 4000 4500 5000 5500 6000 6500 7000 Gain (dB) Frequency (MHz) 4000 4500 5000 5500 6000 6500 7000 -20 -15 -10 S11 (dB) Frequency (MHz) 4000 4500 5000 5500 6000 6500 7000 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)
13/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier RF IN RF OUT ASW204 Vsupply=+3.3 V C1=56 pF C2=56 pF L1=33 nH C4=1 F C3=100 pF L2=33 nH R1=12 k RF IN RF OUT ASW204 Vsupply=+3.3 V C1=56 pF C2=56 pF L1=33 nH C4=1 F C3=100 pF L2=33 nH R1=12 k 1) OIP3 is measured with two tones at an output power of +3 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 900 2000 Magnitude S21 (dB) 18.5 16.3 Magnitude S11 (dB) -11 -10 Magnitude S22 (dB) -15 -11 Output P1dB (dBm) 17.5 18.0 Output IP31) (dBm) 27.5 28.0 Noise Figure (dB) 1.7 1.8 Device Voltage (V) +3.3 +3.3 Current (mA) 35 35 Wide Band 500 ~ 2700 MHz +3.3 V/ 35 mA 0 300 600 900 1200 1500 1800 2100 2400 2700 Gain (dB) Frequency (MHz) 0 300 600 900 1200 1500 1800 2100 2400 2700 -20 -15 -10 S11 (dB) Frequency (MHz) 0 300 600 900 1200 1500 1800 2100 2400 2700 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency [MHz]
14/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier 1) OIP3 is measured with two tones at an output power of +0 dBm/tone sep a- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 40 1200 2400 Magnitude S21 (dB) 19.3 17.0 16.2 Magnitude S11 (dB) -9 -15 -16 Magnitude S22 (dB) -8 -7 -11 Output P1dB (dBm) 21.5 23.0 22.5 Output IP31) (dBm) 27.0 33.5 33.0 Noise Figure (dB) 3.6 2.2 2.4 Device Voltage (V) +5 +5 +5 Current (mA) 55 55 55 40 ~ 2400 MHz +5 V Vdevice=+5 V L1=270 nH ASW204 C1=1 FRF IN RF OUTC2=1 F C3=1 FR1=680 C4=100 pF C5=1 F 0 500 1000 1500 2000 2500 Frequency (MHz) Gain (dB) 0 500 1000 1500 2000 2500 Frequency (MHz) -25 -20 -15 -10 S11 (dB) 0 500 1000 1500 2000 2500 Frequency (MHz) -20 -15 -10 S22 (dB) 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Stability Factor
15/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Performance with varying VDEVICE VDEVICE (V) Current (mA) Freq. (MHz) Gain (dB) S11 (dB) S22 (dB) OIP3 (dBm) P1dB (dBm) NF (dB) +5.3 75 +5.0 55 +4.8 43 +4.65 35
16/16 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 April 2017 ASW204 5 ~ 8000 MHz MMIC Amplifier Copyright 2009-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no re- sponsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 20~40 sec 260 C 200 C 150 C 60~180 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) Recommended Soldering Reflow Profile