ALE2045T2 ASB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

1/4 www.asb.co.kr August 2009 plerowTM ALE2045T2 Internally Matched LNA Module The plerowTM ALE-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-cation terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Pin Number Function 2 RF In 5 RF Out 6 Vs Others Ground Outline Drawing (Unit: mm)

  • S21 = 26.8 dB @ 1920 MHz = 25.2 dB @ 2170 MHz · NF of 0.80 dB over Frequency · Unconditionally Stable · Single 5V Supply · High OIP3 @ Low Current Note: 1. The number and size of ground via holes in a circuit board is critical for thermal RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of all ground pins for better RF and thermal performance, as shown in the drawing at the left side. (Recommended Footprint) ALE2045T2 ASB Inc. (Top View) (Bottom View) Ø0.4 plated thru holes to ground plane plerow (Side View) Solder Stencil Area Features Description

2/4 www.asb.co.kr August 2009 plerowTM ALE2045T2 Internally Matched LNA Module S-parameters Noise Figure OIP3 P1dB 1920~2170 MHz +5 V Typical Performance (Measured) S-parameters & K Factor

3/4 www.asb.co.kr August 2009 plerowTM ALE2045T2 Internally Matched LNA Module 1. S-parameter 2. OIP3, P1dB & NF Note: tested at room temperature. 1. S-parameter 2. OIP3, P1dB & NF Note: tested at Vs= 5V. RF Performance with Operating Temperature RF Performance with Voltage Change

4/4 www.asb.co.kr August 2009 Application Circuit Recommended Soldering Reflow Process 20~40 sec 260°C 200°C 150°C 60~180 sec Ramp-up (3˚C/sec) Ramp-down (6°C/sec) + - ALE OUT IN C1 C2 VS Tantal or MLC (Multi Layer Ceramic) Capacitor IN OUT Vs Size 25x25mm (for ALE-T Series – 10x10mm) Evaluation Board Layout