ASL580_17 ASB | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 14
Technical content
1/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC (Supply Voltage = +8 V, TA = +25 C, Z0 = 75 ) Parameters Units Typical Frequency MHz 5 50 500 860 1200 S11 dB -18 -18 -13 -10 -15 S22 dB -18 -20 -14 -11 -14 Output IP21),2) dBm 50 52 52 45 49 CSO3) dBc 60 CTB3) dBc > 70 Current mA 120 Device Voltage V +8 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz(up-link) or 6 MHz(down-link). 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. Parameters Units Min Typ. Max Testing Frequency MHz 500 Gain dB 19.4 S11 dB -13 S22 dB -14 Output IP3 dBm 41 Noise Figure dB 1.6 Output P1dB dBm 24.5 Current mA 120 Device Voltage V +8 Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +9 V Operating Junction Temperature +150C Input RF Power (CW, 75 matched) +2 dBm Maximum Current 220 mA Thermal Resistance 43 C/W Features Description Typical Performance Absolute Maximum Ratings 19.4 dB Gain at 500 MHz 24.5 dBm P1dB at 500 MHz 41 dBm Output IP3 at 500 MHz 1.6 dB NF at 500 MHz 75 Input & Output Match Bandwidth 5 ~ 1200 MHz Single Supply +8 V The ASL580, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 2.6 GHz, being suitable for use in the fiber receiver, distribution amplif iers and drop amplifiers of CATV systems, and in the mobile wireless repeaters and BTS. The amplifier is availa- ble in a SOT89 package and passes through the stringent DC, RF, and reliability tests. Product Specifications ASL580 Pin Configuration Pin No. Function
1 RF IN
2 GND
3 RF OUT & Bias
CATV & 50 ~ 1000 MHz CATV, 50 ~ 1000 MHz & High Gain (S21 > 20 dB) CATV & 50 ~ 1000 MHz (Positive gain slope) CATV & 50 ~ 1200 MHz CATV & 5 ~ 200 MHz 50 ~ 1000 MHz (Push-Pull, 1:1 transformer) 50 ~ 1200 MHz (Push-Pull, 1:1 transformer) RFID & 13.5 MHz (50 ) DVB, CMMB & 450 ~ 950 MHz (50 )
2/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC Pin No. Function Mounting Recommendation (In mm) Outline Drawing Note: 1. The number and size of ground via h oles in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow ESD Classification & Moisture Sensitivity Level Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 L 0.89 1.04 1.20 b 0.36 0.42 0.48 b1 0.41 0.47 0.53 C 0.38 0.40 0.43 D 4.40 4.50 4.60 D1 1.40 1.60 1.75 E 3.64 --- 4.25 E1 2.40 2.50 2.60 e1 2.90 3.00 3.10 H 0.35 0.40 0.45 S 0.65 0.75 0.85 e 1.40 1.50 1.60 ASL580 Pxxxx Lot No. Part No.
3/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. 0 100 200 300 400 500 600 700 800 900 1000 -35 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) -40 o c o c o c Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 1.4 1.6 1.7 Magnitude S21 (dB) 20.3 19.4 18.5 Magnitude S11 (dB) -18 -13 -10 Magnitude S22 (dB) -20 -14 -11 Output P1dB (dBm) 24.5 24.5 23.5 Output IP31) (dBm) 39.0 41.0 39.5 Output IP21),2) (dBm) 52 52 45 CSO (dBc)3) 60 CTB (dBc) 3) > 70 Device Voltage (V) +8 Current (mA) 120 S-parameters CATV 50 ~ 1000 MHz +8 V
4/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 0 100 200 300 400 500 600 700 800 900 1000 NF (dB) Frequency (MHz) -40 o c o c o c 4 5 6 7 8 9 10 11 12 13 14 15 16 Output IP2 (dBm) Pout per Tone (dBm) -40 o c o c o c 4 5 6 7 8 9 10 11 12 13 14 15 16 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 100 150 200 Current (mA) Temperature ( o P1dB vs. Temperature Current vs. Temperature Output IP2 vs. Tone Power (Frequency = 860 MHz) MHz) Gain vs. Temperature Output IP3 vs. Tone Power (Frequency = 860 MHz) NF vs. Temperature
5/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 1.4 1.3 1.4 Magnitude S21 (dB) 22.4 20.5 20.1 Magnitude S11 (dB) -18 -8 -12 Magnitude S22 (dB) -18 -9 -9 Output P1dB (dBm) 20.5 19.5 20.0 Output IP31) (dBm) 39 43 45 Output IP21),2) (dBm) 53 57 51 CSO (dBc)3) 60 CTB (dBc) 3) > 70 Device Voltage (V) +8 Current (mA) 120 S-parameters CATV High Gain ( S21 > 20 dB ) 50 ~ 1000 MHz +8 V 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
6/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 1002 Noise Figure (dB) 1.7 1.9 1.9 1.7 Magnitude S21 (dB) 17.5 17.5 17.5 17.8 Magnitude S11 (dB) -10 -11 -14 -20 Magnitude S22 (dB) -10 -18 -18 -20 Output P1dB (dBm) 25.0 24.5 24.5 25.0 Output IP31) (dBm) 40.0 42.5 39.0 41.0 Output IP21),2) (dBm) 54 60 45 49 Device Voltage (V) +8 Current (mA) 120 S-parameters Positive gain slope CATV 50 ~ 1002 MHz +8 V 0 200 400 600 800 1000 1200 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
7/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 0 200 400 600 800 1000 1200 1400 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 Gain (dB) Frequency (MHz) 1) OIP3 and OIP2 are measured with two tones at an output pow er of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 1200 Noise Figure (dB) 1.7 1.8 1.7 Magnitude S21 (dB) 17.5 17.4 17.4 Magnitude S11 (dB) -10 -12 -15 Magnitude S22 (dB) -10 -17 -14 Output P1dB (dBm) 25.0 24.5 25.0 Output IP31) (dBm) 40.0 42.5 43.5 Output IP21),2) (dBm) 54 60 49 Device Voltage (V) +8 Current (mA) 120 S-parameters CATV 50 ~ 1200 MHz +8 V
8/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 0 50 100 150 200 250 300 Gain (dB) Frequency (MHz) 0 50 100 150 200 250 300 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 250 300 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) 2.0 1.2 1.3 Magnitude S21 (dB) 21.0 21.0 20.5 Magnitude S11 (dB) -18 -20 -18 Magnitude S22 (dB) -18 -20 -15 Output P1dB (dBm) 25.5 25.0 24.5 Output IP31) (dBm) 38.0 39.0 40.5 Output IP21),2) (dBm) 50 53 52 Device Voltage (V) +8 Current (mA) 120 S-parameters CATV 5 ~ 200 MHz +8 V
9/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1000 MHz +8 V Frequency (MHz) 50 500 860 Magnitude S21 (dB) 15.7 15.4 15.4 Magnitude S11 (dB) -16 -12 -18 Magnitude S22 (dB) -16 -12 -16 Output P1dB (dBm) 25.5 27.0 27.0 Output IP31) (dBm) 39.0 43.5 42.0 Output IP21),2) (dBm) 67 60 57 Noise Figure (dB) 2.3 2.2 2.1 Device Voltage (V) +8 Current (mA) 240 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
10/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +12 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 0 200 400 600 800 1000 1200 1400 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 Gain (dB) Frequency (MHz) Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1200 MHz +8 V Frequency (MHz) 50 500 1200 Magnitude S21 (dB) 15.3 15.0 15.3 Magnitude S11 (dB) -15 -10 -10 Magnitude S22 (dB) -15 -10 -12 Output P1dB (dBm) 25.5 27.0 27.0 Output IP31) (dBm) 39.5 44.0 46.0 Output IP21),2) (dBm) 67 64 59 Noise Figure (dB) 2.2 2.1 2.3 Device Voltage (V) +8 Current (mA) 240
11/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 is measured with two tones at an output power of +13 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters APPLICATION CIRCUIT Frequency (MHz) 13.5 Magnitude S21 (dB) 19.5 Magnitude S11 (dB) -10 Magnitude S22 (dB) -9 Output P1dB (dBm) 25 Output IP31) (dBm) 39.5 Noise Figure (dB) 1.9 Device Voltage (V) +8 Current (mA) 120 RFID (50 )
13.5 MHz
+8 V 0 50 100 150 200 250 300 Gain (dB) Frequency (MHz) 0 50 100 150 200 250 300 -20 -15 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 250 300 -20 -15 -10 S22 (dB) Frequency (MHz)
12/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 1) OIP3 is measured with two tones at an output power of +9 dBm/tone sep- arated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters APPLICATION CIRCUIT Frequency (MHz) 450 700 950 Magnitude S21 (dB) 19.0 19.0 18.5 Magnitude S11 (dB) -12 -14 -10 Magnitude S22 (dB) -13 -18 -16 Output P1dB (dBm) 24.5 24.0 23.0 Output IP31) (dBm) 44.0 45.0 44.5 Noise Figure (dB) 1.6 1.6 1.7 Device Voltage (V) +6 Current (mA) 150 DVB & CMMB (50 ) 450 ~ 950 MHz +6 V 0 200 400 600 800 1000 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz)
13/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC ALTERNATIVE APPLICATION CIRCUIT
14/14 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 June 2017 ASL580 Wideband Linear Amplifier MMIC 260 C 150 C 60~180 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) Copyright 2011-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no re- sponsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. Recommended Soldering Reflow Profile 20~40 sec 200 C