ASL551_17 ASB | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
1/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. 2) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 6 MHz. 3) OIP2 is measured at F1+F2 Frequency. 4) OIP2 is measured with two tones at an output power of +14 dBm/tone at F1(400 MHz)+F2(450 MHz). 5) CSO & CTB measured at Pout = 105 dBuV 84 ch. Parameters Units Min Typ. Max Testing Frequency MHz 500 Gain dB 19.2 S11 dB -18 S22 dB -18 Output IP3 dBm 44.5 Noise Figure dB 1.9 Output P1dB dBm 28 Current mA 250 Device Voltage V +8 Parameters Units Typical Frequency MHz 5 500 Noise Figure dB 1.9 1.9 Gain dB 20.5 19.2 S11 dB -20 -18 S22 dB -20 -18 Output P1dB dBm 26 28 Output IP3 dBm 39.01) 44.52) Output IP2 (dBm) dBm 621), 3) 714) CSO dBc - 625) CTB dBc - 635) Current mA 250 250 Device Voltage V +8.0 +8.0 Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +9 V Operating Junction Temperature +160 C Input RF Power (CW, 75 matched) +12 dBm Maximum Current 500 mA Thermal Resistance 18 C/W Features Description Typical Performance Absolute Maximum Ratings High Linearity 42.0 dBm OIP3 Low Noise Figure 2.0 dB 28 dBm P1dB 75 Input & Output Match Bandwidth 5 ~ 1200 MHz Single Supply +8.0 V The ASL551, a wideband linear push -pull amplifi- er MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 1 .2 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the m obile wireless repeaters and BTS. The amplifier is available in a SOIC8 package and passes through the stringent DC, RF, and reliabil- ity tests. Application Circuit
- 50 ~ 860 MHz (8V)
- 50 ~ 1200 MHz (8V)
- 5 ~ 200 MHz (8 V & 5V) Product Specifications ASL551 Pin Configuration Pin No. Function
1 RF IN 1
2,3,6,7 NC
4 RF IN 2
5 RF OUT 2
8 RF OUT 1
2/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC Pin No. Function Pin No. Function.
1 RF IN 1 5 RF OUT 2
2 NC 6 NC
3 NC 7 NC
4 RF IN 2 8 RF OUT 1
Mounting Recommendation (In mm) Outline Drawing Note: 1. Backside metal paddle is RF and DC ground. Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 A1 0.00 --- 0.10 A2 --- 1.45 --- B 0.33 --- 0.51 C 0.19 --- 0.25 D 4.80 --- 5.00 D2 3.20 3.30 3.40 E 5.80 6.00 6.20 E1 3.80 3.90 4.00 E2 2.30 2.40 2.50 e --- 1.27 --- L 0.40 --- 1.27 y --- --- 0.10 0 --- 8 L1 1.04REF
- ASL551 Part No. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow Note: 1. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 2. To ensure reliable operation, device ground paddle -to-ground pad soldering is critical. Recommended is that thermal grease should be used for better thermal performance. 3. Add mounting screws near the part to fasten the board to a heat sinker. Ensure that the ground / thermal via region con- tacts the heat sinker. 4. A proper heat dissipation path underneath the area of the PCB for the mounted device is strictly required for proper thermal operation. Damage to the device can result from in- appropriate heat dissipation.
3/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 0 200 400 600 800 1000 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 200 400 600 800 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 Gain (dB) Frequency (MHz) C1=1 F L2=1 H L5=1 H C4=1 F C3=1 F C5=10 F C6=1 F C9=1 FC8=1 F C10=10 F R1=430 R2=430 L1=1.8 nH L4=1.8 nH L3=3.3 nH L6=3.3 nH C2=1.5 pF C7=1.5 pF C11=1.8 pF 1 1 1 : 1 Transformer ASL551 Vs = 8 V Vs = 8 V RF IN RF OUT (LQH31CN1R0M03) (LQH31CN1R0M03) Transformer 1 : 1 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 6 MHz. 2) OIP2 is measured with two tones at an output power of +14 dBm/tone at F1(400 MHz)+F2(450MHz). 3) Pout = 105 dBuV for 84 channels. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 1.8 1.9 2.0 Magnitude S21 (dB) 19.5 19.2 18.9 Magnitude S11 (dB) -18 -18 -16 Magnitude S22 (dB) -18 -18 -16 Output P1dB (dBm) 28 28 27 Output IP31) (dBm) 43.5 44.5 42.5 Output IP22) (dBm) 71 CSO (dBc) 3) 62 CTB (dBc) 3) 63 Device Voltage (V) +8 Current (mA) 250 Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 860 MHz +8 V
4/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 6 MHz. 2) OIP2 is measured with two tones at an output power of +14 dBm/tone at F1(400 MHz)+F2(450MHz). S-parameters Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 1200 Noise Figure (dB) 1.7 1.9 2.2 Magnitude S21 (dB) 18.8 18.8 18.8 Magnitude S11 (dB) -16 -16 -12 Magnitude S22 (dB) -16 -16 -13 Output P1dB (dBm) 28 28 26 Output IP31) (dBm) 43 43 40 Output IP22) (dBm) 60 Device Voltage (V) +8 Current (mA) 250 Note: MABA-007159 1:1 impedance transformers are used. CATV Push-Pull 1 : 1 transformer 50 ~ 1200 MHz +8 V
5/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC P1dB vs. Temperature Current vs. Temperature Output IP2 vs. Tone Power Gain vs. Temperature Output IP3 vs. Tone Power
6/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC C1=1 F L2=1 H L5=1 H C4=1 F C3=1 F C5=10 F C6=1 F C9=1 FC8=1 F C10=10 F R1=390 R2=390R4=51 k R3=51 k L1=2.2 nH L4=2.2 nH L3=2.2 nH L6=2.2 nH C2=2.2 pF C7=2.2 pF C11=1.5 pF 1 1 1 : 1 Transformer ASL551 Vs = 8 V Vs = 8 V RF IN RF OUT (LQH31CN1R0M03) (LQH31CN1R0M03) Transformer 1 : 1 0 200 400 600 800 1000 1200 1400 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 1400 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 6 MHz. 2) OIP2 is measured with two tones at an output power of +14 dBm/tone at F1(400 MHz)+F2(450MHz). Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 1200 Noise Figure (dB) 2.0 2.0 2.3 Magnitude S21 (dB) 18.8 18.8 18.8 Magnitude S11 (dB) -16 -16 -12 Magnitude S22 (dB) -16 -16 -13 Output P1dB (dBm) 28 28 26 Output IP31) (dBm) 43.5 44.5 42.5 Output IP22) (dBm) 73 Device Voltage (V) +8 Current (mA) 370 Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1200 MHz +8 V
7/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC ALTERNATIVE APPLICATION CIRCUIT
8/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 0 50 100 150 200 250 300 Gain (dB) Frequency (MHz) 0 50 100 150 200 250 300 -40 -30 -20 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 250 300 -40 -30 -20 -10 S22 (dB) Frequency (MHz) 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) 1.9 1.4 1.8 Magnitude S21 (dB) 20.5 20.5 20.5 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -20 -20 -18 Output P1dB (dBm) 26 26 26 Output IP31) (dBm) 39 40 42 Output IP21),2) (dBm) 62 70 72 Device Voltage (V) +8 Current (mA) 250 Note: MABA-007159 1:1 impedance transformers are used. CATV Push-Pull 1 : 1 transformer 5 ~ 200 MHz +8 V S-parameters
9/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 0 50 100 150 200 250 300 -40 -30 -20 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 250 300 Gain (dB) Frequency (MHz) 0 50 100 150 200 250 300 -40 -30 -20 -10 S22 (dB) Frequency (MHz) 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) 1.5 1.8 2.0 Magnitude S21 (dB) 20.5 20.5 20.0 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -20 -20 -18 Output P1dB (dBm) 25 25 25 Output IP31) (dBm) 40.0 41.5 43.5 Output IP21),2) (dBm) 66 73 78 Device Voltage (V) +5 Current (mA) 300 Note: MABA-007159 1:1 impedance transformers are used. CATV Push-Pull 1 : 1 transformer 5 ~ 200 MHz +5 V S-parameters
10/10 ASB Inc. sales@asb.co.kr Tel: +82-42-528-7225 July 2017 ASL551 Wideband Linear Push-pull Amplifier MMIC 260 C 150 C 60~180 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) Copyright 2011-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no re- sponsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. Recommended Soldering Reflow Profile 20~40 sec 200 C