ASL390

ASL390_17 ASB | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

1/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC (Supply Voltage = +5 V, TA = +25 C, Z0 = 75 ) Parameters Units Typical Frequency MHz 5 50 500 860 Noise Figure dB 3.1 2.3 2.3 2.5 Gain dB 23.3 23.8 23.3 22.1 Output P1dB dBm 18.5 22.0 22.0 19.5 Output IP31) dBm 37.51) 39.02) 42.02) 41.02) CSO4) dBc 66 / 60 CTB4) dBc 75 / 69 Supply Current mA 120 120 Device Voltage V +5 +5 1) OIP3 and OIP2 are measured with two tones at an output power of +7 dBm/tone separated by 1 MHz. 2) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 6 MHz. 3) OIP2 is measured at F1+F2 Frequency. 4) Pout=95 dBuV / 98 dBuV for 84 channels VHF signal. Parameters Units Min. Typ. Max. Testing Frequency MHz 500 Gain dB 22.3 23.3 S11 dB -20 -16 S22 dB -18 -15 Output IP3 dBm 39 42 Noise Figure dB 2.3 2.7 Output P1dB dBm 21 22 22 Supply Current mA 100 120 140 Device Voltage V +5 Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +7 V Operating Junction Temperature +150 C Input RF Power (CW, 75  matched)* +24 dBm Thermal Resistance 42 C/W Features Description Typical Performance Absolute Maximum Ratings  23.3 dB Gain at 500 MHz  22 dBm P1dB at 500 MHz  42 dBm Output IP3 at 500 MHz  75  Input & Output Match  Bandwidth 5 ~ 1200 MHz  Single Supply The ASL390, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 1.2 GHz, being suitable for use in the fiber receiver, distribution amplif iers and drop amplifiers of CATV systems, and in the mobile wireless repeaters and BTS. The amplifier is availa- ble in a SOT89 package and passes through the stringent DC, RF, and reliability tests.

Applications

 5 ~ 200 MHz (3.3 V)  5 ~ 200 MHz  50 ~ 1000 MHz  50 ~ 1200 MHz  50 ~ 1000 MHz (Push-Pull, 1:1 transformer)  50 ~ 1000 MHz (3.3 V) Product Specifications ASL390 Pin Configuration Pin No. Function

1 RF IN

2 GND

3 RF OUT & Bias

2/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC Pin No. Function Mounting Recommendation (In mm) Outline Drawing Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow ESD Classification & Moisture Sensitivity Level Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 L 0.89 1.04 1.20 b 0.36 0.42 0.48 b1 0.41 0.47 0.53 C 0.38 0.40 0.43 D 4.40 4.50 4.60 D1 1.40 1.60 1.75 E 3.64 --- 4.25 E1 2.40 2.50 2.60 e1 2.90 3.00 3.10 H 0.35 0.40 0.45 S 0.65 0.75 0.85 e 1.40 1.50 1.60 ASL390 Pxxxx Lot No. Part No.

3/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +3 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. 0 50 100 150 200 Gain (dB) Frequency (MHz) 0 50 100 150 200 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 50 100 150 200 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) 2.4 2.4 2.0 Magnitude S21 (dB) 23.3 23.4 23.0 Magnitude S11 (dB) -12 -16 -17 Magnitude S22 (dB) -16 -20 -20 Output P1dB (dBm) 14 18 18 Output IP31) (dBm) 30 34 35 Output IP21),2) (dBm) 48 43 43 Device Voltage (V) +3.3 Current (mA) 68 S-parameters CATV 5 ~ 200 MHz +3.3 V RF IN RF OUT ASL390 C2=1 F C3=10 F C1=1 nF L1=22 H (LQH32MN220J23) Vs=3.3 V L2=4.7 H R1=150 

4/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 0 50 100 150 200 Frequency (MHz) Gain (dB) 0 50 100 150 200 Frequency (MHz) -30 -25 -20 -15 -10 S22 (dB) 1) OIP3 and OIP2 are measu red with two tones at an output power of +3/+9 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) - 2.3 2.3 Magnitude S21 (dB) 23.2 23.7 23.5 Magnitude S11 (dB) -20 -18 -20 Magnitude S22 (dB) -19 -20 -20 Output P1dB (dBm) 17.5 21.0 21.0 Output IP31) (dBm) 34.0 41.0 41.5 Output IP21),2) (dBm) 55 54 51 Device Voltage (V) +5 Current (mA) 120 S-parameters CATV 5 ~ 200 MHz +5 V Vdevice=+5 V L1=22 H ASL390 C1=10 nFRF IN RF OUTC2=1 F R1=150  C3=10 F L2=3.3 H (LQH32MN220J23) R2=330  L3=3.3 H 0 50 100 150 200 Frequency (MHz) -30 -25 -20 -15 -10 S11 (dB)

5/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout=95 dBuV / 98 dBuV for 84 channels VHF signal 0 100 200 300 400 500 600 700 800 900 1000 -40 -35 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) -40 o c o c o c Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 2.3 2.3 2.5 Magnitude S21 (dB) 23.8 23.3 22.1 Magnitude S11 (dB) -15.0 -20.0 -16.5 Magnitude S22 (dB) -18.0 -18.0 -15.5 Output P1dB (dBm) 22.0 22.0 19.5 Output IP31) (dBm) 39 42 41 Output IP21),2) (dBm) 49 50 50 CSO3) (dBc) 66, 60 CTB3) (dBc) 75, 69 Device Voltage (V) +5 Current (mA) 120 S-parameters CATV 50 ~ 1000 MHz +5 V RF IN RF OUT ASL390 C2=1 F C4=10 uF C1=1 F C3=1 pF L1=1 H (LQH31CN1R0M03) L2=12 nH Vs=5 V

6/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 1.50 1.75 2.00 2.25 2.50 2.75 3.00 NF (dB) Frequency (GHz) -60 -40 -20 0 20 40 60 80 100 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 Frequency = 500 MHz NF (dB) Temperature ( o 7 8 9 10 11 12 13 14 15 Output IP2 (dBm) Pout per Tone (dBm) -40 o c o c o c 7 8 9 10 11 12 13 14 15 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 100 110 120 130 140 Current (mA) Temperature ( o P1dB vs. Temperature Current vs. Temperature Gain vs. Temperature Output IP2 vs. Tone Power (Frequency = 860 MHz) MHz) Output IP3 vs. Tone Power (Frequency = 860 MHz) NF vs. Temperature NF vs. Frequency

7/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 1200 Noise Figure (dB) 3.2 2.5 2.5 2.5 Magnitude S21 (dB) 23.0 22.8 22.8 21.2 Magnitude S11 (dB) -16.0 -13.0 -13.0 -12.0 Magnitude S22 (dB) -14.5 -16.0 -15.0 -17.0 Output P1dB (dBm) 23.0 21.0 19.5 19.5 Output IP31) (dBm) 41.0 42.5 40.0 41.0 Output IP21),2) (dBm) 52 55 46 53 Device Voltage (V) +5 Current (mA) 120 S-parameters CATV 50 ~ 1200 MHz +5 V 0 200 400 600 800 1000 1200 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 1200 -20 -15 -10 S22 (dB) Frequency (MHz) Vdevice=+5 V ASL390 L2=6.8 nH C3=1 pF C1=1 F C5=10 F RF IN RF OUTC2=1 F R1=16  C4=33 pF L3=5.6 nH L1=1 H (LQH31CN1R0M03)

8/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/ton e separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout=102.5 dBuV for 60 channels VHF signal. ASL390 RF IN Vs=5 V C5=10 uF C6=1 uF C1=1 uF C2=1 uF 1:1 transformer RF OUT C7=1 uF C10=10 uF Vs=5 V ASL390 1:1 transformer R1=820  C4=1 uF L2=1 uH (LQH31CN1R0M03) R2=820  C9=1 uF L1=1 uH (LQH31CN1R0M03) C3=0.5 pF C8=0.5 pF 0 100 200 300 400 500 600 700 800 900 1000 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 3.2 2.6 2.5 Magnitude S21 (dB) 19.2 18.6 17.8 Magnitude S11 (dB) -17 -13 -14 Magnitude S22 (dB) -17 -11 -13 Output P1dB (dBm) 25 26 26 Output IP31) (dBm) 39 43 42 Output IP21) (dBm) 70 63 56 CSO (dBc)2) 66 CTB (dBc) 2) 63 Device Voltage (V) +5 Current (mA) 240 Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1000 MHz +5 V

9/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) -40 -35 -30 -25 -20 -15 -10 S22 (dB) 1) OIP3 and OIP2 are measured with two tones at an output power of +4 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Gain (dB) Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 2.0 2.2 2.4 Magnitude S21 (dB) 23.6 22.9 21.7 Magnitude S11 (dB) -15.0 -18.0 -14.0 Magnitude S22 (dB) -18.0 -18.0 -14.0 Output P1dB (dBm) 18.0 18.0 17.5 Output IP31) (dBm) 37.0 35.5 33.0 Output IP21),2) (dBm) 50 47 42 Device Voltage (V) +3.3 Current (mA) 74 S-parameters CATV 50 ~ 1000 MHz +3.3 V RF IN RF OUT ASL390 C2=1 F C4=10 uF C1=1 F C3=1 pF L1=1 H (LQH31CN1R0M03) L2=12 nH Vs=5 V 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) -30 -25 -20 -15 -10 S11 (dB)

10/10 ASB Inc.  sales@asb.co.kr  Tel: +82-42-528-7225 April 2017 ASL390 Wideband Linear Amplifier MMIC Copyright 2012-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no re- sponsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 20~40 sec 260 C 200 C 150 C 60~180 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) Recommended Soldering Reflow Profile