ASL380

ASL380 ASB | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

1/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC Parameters Units Typical Frequency MHz 5 50 500 860 2150 S11 dB -20 -15 -12 -12 -11 S22 dB -20 -16 -18 -16 -13 Output P1dB dBm 21 21 22 22 20 Output IP3 dBm 40 41 41.5 41.5 39 Output IP2 1),2) dBm 51 58 63 49 52 CSO dBc 60 CTB dBc > 70 Current mA 110 Device Voltage V 5 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 1 MHz(up-link) or 6 MHz(down-link). 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. Parameters Units Min Typ Max Testing Frequency MHz 500 Gain dB 19.2 S11 dB -12 S22 dB -18 Output IP3 dBm 41.5 Noise Figure dB 1.6 Output P1dB dBm 22 Current mA 110 Device Voltage V 5 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Device Voltage +6V Operating Junction Temperature +160°C Input RF Power (CW, 75ohm matched) 6 dBm Maximum Current 150 mA Thermal Resistance 43 °C/W Features Description Typical Performance Absolute Maximum Ratings

• 19.2 dB Gain at 500 MHz
• 22 dBm P1dB at 500 MHz
• 41.5 dBm Output IP3 at 500 MHz
• 1.6 dB NF at 500 MHz
• 75 Ohm Input / Output Match
• Bandwidth 5 ~ 1000 MHz
• Single Supply 5 V The ASL380, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 1 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the mobile wire- less repeaters and BTS. The amplifier is available in an SOT-89 package and passes through the strin- gent DC, RF, and reliability tests. Application Circuit
• CATV / 50 ~ 1000 MHz
• CATV / 5 ~ 200 MHz
• 950 ~ 2150 MHz (SMATV)
• 50 ~ 1000 MHz (Push-Pull / 1:1 transformer) Product Specifications ASL380 Package Style: SOT-89 Pin Configuration Pin No. Function

1 RF IN

2 GND

3 RF OUT / Bias

2/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC Pin No. Function Mounting Recommendation (in mm) Outline Drawing Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 L 0.89 1.04 1.20 b 0.36 0.42 0.48 b1 0.41 0.47 0.53 C 0.38 0.40 0.43 D 4.40 4.50 4.60 D1 1.40 1.60 1.75 E 3.64 --- 4.25 E1 2.40 2.50 2.60 e1 2.90 3.00 3.10 H 0.35 0.40 0.45 S 0.65 0.75 0.85 e 1.40 1.50 1.60 ASL380 Pxxxx Lot No. Part No.

3/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone se- parated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 1.3 1.6 1.7 Magnitude S21 (dB) 19.6 19.2 18.8 Magnitude S11 (dB) -15 -12 -12 Magnitude S22 (dB) -16 -18 -16 Output P1dB (dBm) 21 22 22 Output IP3 (dBm) 41 41.5 41.5 Output IP2 1),2) (dBm) 58 63 49 CSO (dBc) CTB (dBc) > 70 Device Voltage (V) 5 Current (mA) 110 S-parameters CATV 50 ~ 1000 MHz +5 V RF IN RF OUT ASL380 Vs=5 V C2=180 pF C6=10 uF R1=910 W C1=1 uF C3=1.5 pF L2=9.1 nH L3=8.2 nH C5=1 uF C4=0.75 pF L1=1 uH (LQH31CN1R0M03) 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c

4/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC P1dB vs. Temperature Current vs. Temperature Output IP2 vs. Tone Power (Frequency = 860 MHz) Gain vs. Temperature Output IP3 vs. Tone Power (Frequency = 860 MHz) -60 -40 -20 0 20 40 60 80 100 100 150 200 Current (mA) Temperature ( o -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 860 MHz 4 5 6 7 8 9 10 11 12 13 14 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c 4 5 6 7 8 9 10 11 12 13 14 Output IP2 (dBm) Pout per Tone (dBm) -40 o c o c o c

5/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone se- parated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 5 50 200 Noise Figure (dB) 1.5 1.2 1.2 Magnitude S21 (dB) 21.2 21.4 20.9 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -20 -20 -17 Output P1dB (dBm) 21 21.5 21.5 Output IP3 (dBm) 40 40.5 41 Output IP2 1),2) (dBm) 51 52 51 Device Voltage (V) 5 Current (mA) 110 S-parameters CATV 5 ~ 200 MHz +5 V RF IN RF OUT ASL380 Vs=5 V C2=4.7 nF C4=10 uF R1=1.3 kW C1=1 uF L1=22 uH (LQH31MN220J03) C3=1 uF 0 50 100 150 200 Gain (dB) Frequency (MHz) 0 50 100 150 200 -35 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 -35 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz)

6/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone se- parated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT S-parameters SMATV 950 ~ 2150 MHz +5 V Frequency (MHz) 950 1500 2150 Noise Figure (dB) 1.8 2.6 1.9 Magnitude S21 (dB) 17 16.8 16.8 Magnitude S11 (dB) -8 -5 -11 Magnitude S22 (dB) -9 -15 -13 Output P1dB (dBm) 20 19 20 Output IP3 (dBm) 42 38 39 Output IP2 1),2) (dBm) 47 45 52 Device Voltage (V) 5 Current (mA) 110 0 500 1000 1500 2000 2500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -20 -15 -10 S22 (dB) Frequency (MHz) RF IN RF OUT ASL380 Vs=5 V C2=100 pF C5=10 uF R1=510 W C1=5 pF C3=0.75 pF L1=6.8 nH L2=2.2nH C4=1 uFL3=8.2nH

7/7 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 March 2012 ASL380 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1000 MHz +5 V Frequency (MHz) 50 500 860 Magnitude S21 (dB) 15.6 15.2 15.2 Magnitude S11 (dB) -17 -12 -18 Magnitude S22 (dB) -16 -11 -16 Output P1dB (dBm) 25 26 26 Output IP3 (dBm) 40 44 42.5 Output IP2 1),2) (dBm) 67 64 63 Noise Figure (dB) 2.1 2.0 2.0 Device Voltage (V) 5 Current (mA) 220 ASL380 RF IN Vs=5 V C4=10 uF C5=1 uF C1=1 uF C2=1 uF 1:1 transformer RF OUT C6=1 uF C8=10 uF Vs=5 V ASL380 1:1 transformer R1=360 W C3=1 uF C7=1 uF L1=1 uH (LQH31CN1R0M03) R2=360 W L1=1 uH (LQH31CN1R0M03) 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz)