ASL360

ASL360 ASB | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

1/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC Parameters Units Typical Frequency MHz 5 50 500 860 2150 S11 dB -18 -17 -15 -15 -10 S22 dB -16 -17 -17 -15 -8 Output P1dB dBm 19 21 21 17 17 Output IP3 dBm 34.5 41.5 36.5 Output IP2 1),2),3) dBm 36 53 53 62 - CSO dBc 60 CTB dBc 75 Current mA 110 Device Voltage V 5 1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 1 MHz. 2) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 3) OIP2 is measured at F1+F2 Frequency. 4) 60 channels, +33 dBmV per channel (measured at output). Parameters Units Min Typ Max Testing Frequency MHz 500 Gain dB 16.3 17.3 S11 dB -12 -15 S22 dB -15 -17 Output IP3 dBm 37 40 Noise Figure dB 1.6 1.8 Output P1dB dBm 20 21 Current mA 95 110 125 Device Voltage V 5 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Device Voltage +6V Operating Junction Temperature +160°C Input RF Power (CW, 75ohm matched) 5 dBm Maximum Current 150 mA Thermal Resistance 43 °C/W Features Description Typical Performance Absolute Maximum Ratings

• 17.3 dB Gain at 500 Mz
• 21 dBm P1dB at 500 MHz
• 40 dBm Output IP3 at 500 MHz
• 1.6 dB NF at 500 MHz
• 75 Ohm Input / Output Match
• Bandwidth 5 ~ 1000 MHz
• Single Supply 5 V The ASL360, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 1 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the mobile wire- less repeaters and BTS. The amplifier is available in an SOT-89 package and passes through the strin- gent DC, RF, and reliability tests. Application Circuit
• 50 ~ 1000 MHz
• 5 ~ 200 MHz
• 950 ~ 2150 MHz (SMATV)
• 50 ~ 1000 MHz (Push-Pull / 1:1 transformer)
• 5 ~ 200 MHz (Push-Pull / 1:1 transformer) Product Specifications ASL360 Package Style: SOT-89

2/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC Pin No. Function

1 RF IN

2 GND

3 RF OUT / Bias

Mounting Recommendation (in mm) Outline Drawing Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level Symbols Dimensions (In mm) MIN NOM MAX A 1.40 1.50 1.60 L 0.89 1.04 1.20 b 0.36 0.42 0.48 b1 0.41 0.47 0.53 C 0.38 0.40 0.43 D 4.40 4.50 4.60 D1 1.40 1.60 1.75 E 3.64 --- 4.25 E1 2.40 2.50 2.60 e1 2.90 3.00 3.10 H 0.35 0.40 0.45 S 0.65 0.75 0.85 e 1.40 1.50 1.60 ASL360 Pxxxx Lot No. Part No.

3/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone se- parated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) 60 channels, +33 dBmV per channel (measured at output). Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Frequency (MHz) 50 500 860 Noise Figure (dB) 1.5 1.6 1.7 Magnitude S21 (dB) 17.3 17.3 17.2 Magnitude S11 (dB) -17 -15 -15 Magnitude S22 (dB) -17 -17 -15 Output P1dB (dBm) 21 21 17 Output IP3 (dBm) 41.5 40 34 Output IP2 1),2) (dBm) 53 53 62 CSO (dBc) 60 CTB (dBc) 75 Device Voltage (V) 5 Current (mA) 110 S-parameters CATV 50 ~ 1000 MHz +5 V * Note: Gain slope can be adjusted by L5 and R1 values at the ex- pense of S11 & S22. C1=100 pF C3=470 pF Vs=5 V RF IN RF OUT C6=10 uF ASL360 C5=0.3 pF L2=12 nH L3=330 nH (Coil Inductor) L5=68 nH R1=240 W C2=100 nF L4=3.3 nH C4=0.75 pF L1=1 uH (LQH31CN1R0M03) 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c

4/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC P1dB vs. Temperature Current vs. Temperature Output IP2 vs. Tone Power (Frequency = 860 MHz) Gain vs. Temperature Output IP3 vs. Tone Power (Frequency = 860 MHz) -60 -40 -20 0 20 40 60 80 100 100 150 200 Current (mA) Temperature ( o -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 860 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 860 MHz -1 0 1 2 3 4 5 6 7 8 9 10 11 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c -1 0 1 2 3 4 5 6 7 8 9 10 11 Output IP2 (dBm) Pout per Tone (dBm) -40 o c o c o c

5/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone se- parated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT S-parameters Frequency (MHz) 5 50 200 Noise Figure (dB) 1.8 1.5 1.5 Magnitude S21 (dB) 17.9 18.1 17.1 Magnitude S11 (dB) -18 -20 -18 Magnitude S22 (dB) -16 -20 -16 Output P1dB (dBm) 19 21.5 22 Output IP3 (dBm) 34.5 42 44 Output IP2 1),2) (dBm) 36 55 57 Device Voltage (V) 5 Current (mA) 110 CATV 5 ~ 200 MHz +5 V RF IN RF OUT ASL360 Vs=5 V C1=10 nF C2=820 pF C4=10 uF L1=27 uH R1=75 W L2=4.7 uH C3=10 nFR2=1.2 kW L3=8.2 uH 0 50 100 150 200 Gain (dB) Frequency (MHz) 0 50 100 150 200 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz)

6/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT S-parameters SMATV 950 ~ 2150 MHz +5 V Frequency (MHz) 950 1500 2150 Noise Figure (dB) 1.8 2.3 2.3 Magnitude S21 (dB) 17.3 16.6 15.4 Magnitude S11 (dB) -7 -8 -10 Magnitude S22 (dB) -12 -12 -8 Output P1dB (dBm) 18 17 17 Output IP3 (dBm) 34.5 37 36.5 Device Voltage (V) 5 Current (mA) 110 0 500 1000 1500 2000 2500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 -20 -15 -10 S22 (dB) Frequency (MHz) C1=100 pF L1=8.2 nH C2=100 pF Vs=5 V RF IN RF OUT C4=1 mF ASL360 C3=1 pF L2=12 nH

7/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 50 ~ 1000 MHz +5 V Frequency (MHz) 50 500 860 Magnitude S21 (dB) 12.3 12 11.7 Magnitude S11 (dB) -18 -16 -17 Magnitude S22 (dB) -18 -14 -14 Output P1dB (dBm) 24.5 25 25.5 Output IP3 (dBm) 40 44.5 42.5 Output IP2 1),2) (dBm) 65 66 64 Noise Figure (dB) 2.7 2.7 2.7 Device Voltage (V) 5 Current (mA) 220 ASL360 RF IN Vs=5 V C4=10 uF RF OUT Vs=5 V ASL360 R1=330 W L1=1 uH (LQH31CN1R0M03) 1:1 transformer 1:1 transformer C1=1 uF C2=1 uF C3=1 uF C5=1 uF C6=1 uF C8=10 uF R2=330 W C7=1 uF L2=1 uH (LQH31CN1R0M03) 0 100 200 300 400 500 600 700 800 900 1000 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz)

8/8 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2011 ASL360 Wideband Linear Amplifier MMIC 1) OIP3 and OIP2 are measured with two tones at an output power of +7 dBm/tone se- parated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic APPLICATION CIRCUIT Note: MABA-007159 1:1 impedance transformers are used. S-parameters CATV Push-Pull 1 : 1 transformer 5 ~ 200 MHz +5 V Frequency (MHz) 5 50 200 Magnitude S21 (dB) 13.2 12.3 12.2 Magnitude S11 (dB) -20 -18 -17 Magnitude S22 (dB) -20 -18 -17 Output P1dB (dBm) 22.5 24.5 25 Output IP3 (dBm) 32 42 44.5 Output IP2 1),2) (dBm) 48 56 72 Noise Figure (dB) 3.3 2.7 2.8 Device Voltage (V) 5 Current (mA) 220 ASL360 RF IN Vs=5 V C3=10 uF C5=1 uF C1=1 uF C2=1 nF RF OUT C6=1 nF C8=10 uF Vs=5 V ASL360 R1=330 W C4=1 uF L2=15 uH C7=1 uF L1=15 uH R2=330 W 1:1 transformer 1:1 transformer 0 50 100 150 200 Gain (dB) Frequency (MHz) 0 50 100 150 200 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 50 100 150 200 -25 -20 -15 -10 S22 (dB) Frequency (MHz)