ASL30G

ASL30G ASB | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 15

Technical content

1/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. * 100% in-house DC & RF testing is done on packaged products before taping. Parameters Units Typical Frequency MHz 900 1575 1950 2400 3500 Gain dB 36 30 23 23 17 S11 dB -18 -20 -20 -20 -18 S22 dB -18 -16 -18 -18 -13.5 S12 dB -40 -38 -34 -34 -28 Output IP3 dBm 22 22 21 21 18 Output P1dB dBm 11 11 11 11 7.5 Current mA 20 20 20 20 22 Device Voltage V 3 3 3 3 3 Parameters Units Min Typ Max Frequency MHz 1575 Gain dB 30 S11 dB -20 S22 dB -16 S12 dB -38 Output IP3 dBm 22 Noise Figure dB 0.8 Output P1dB dBm 11 Current mA 20 Device Voltage V 3 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Device Voltage +5 V Operating Junction Temperature +150°C Input RF Power (CW, 50ohm matched)* 22 dBm

• Two-stage LNA
• 30 dB gain & 0.8 dB NF at 1575 MHz
• Unconditionally Stable
• Need only 5 components
• 3 kV Contact Discharge ESD Rating achievable with one external L (Refer to an application circuit at page 6) Features Description Package Style: SOT-363 ASL30G is a two-stage LNA for GPS receiver low noise block. It has a low noise, high gain, and high linearity over a wide range of frequency up to 6 GHz. It is also suitable for use in the low noise amplifier block of the mobile wireless system. The amplifier is available in an SOT-363 package and passes the stringent DC, RF, and reliability tests. Product Specifications* Typical Performance Absolute Maximum Ratings Pin Configuration Pin No. Function

1 VDD

2,4,5 GND

3 RF OUT

6 RF IN

• 900 MHz ( 3 V / 4 V )
• 1575 MHz ( 3 V / 4 V / 1.8 V )
• 1575 MHz ( Robust ESD / ± 3 kV )
• 1950 MHz ( 3 V / 4 V )
• 2400 MHz ( 3 V / 4 V )
• 3300 ~ 3800 MHz ( 3 V / 4 V )

2/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of lead pin 2,4 and 5 for better RF and thermal performance, as shown in the drawing at the left side. 3. You can download the gerber file of ASL226 from http://www.asb.co.kr/s-para/ASL226_gerber.zip Pin No. Function Pin No. Function.

1 VDD 4 GND

2 GND 5 GND

3 RF OUT 6 RF IN

Part No. Mounting Recommendation(in mm) Symbols Dimensions (In mm) Dimensions (In inch) MIN MAX MIN MAX A 0.90 1.10 .036 .044 A1 0.025 0.10 .001 .004 A2 0.875 1.00 .035 .040 b 0.20 0.40 .008 .016 C 0.10 0.15 .004 .006 D 1.90 2.10 .076 .084 E 1.15 1.35 .046 .054 E1 2.00 2.20 .080 .088 e 0.65 BSC. .026 BSC. e1 1.30 BSC. .052 BSC.

3/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 600 700 800 900 1000 1100 1200 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] C2=2.4 pF RF OUT ASL30GRF IN L1=5.1 nH L2=12 nH VDD C3=1 mF C1=100 pF C4=10 mF Schematic S-parameters & K-factor ( 3 V ) APPLICATION CIRCUIT

900 MHz

+3 V / +4 V Board Layout (FR4, 14x11.3 mm2, 0.8T) Bottom Parameter Symbol Test Conditions TYP. Unit Power Gain Gp F = 900 MHz 36 37.5 dB Noise Figure NF F = 900 MHz 0.9 0.9 dB Input Return Loss RLin F = 900 MHz -18 -20 dB Output Return Loss RLout F = 900 MHz -18 -14 dB Reverse Isolation ISO F = 900 MHz -40 -40 dB 1 dB Gain Compression Output Power Po(1dB) F = 900 MHz 11 13.5 dBm rd Intercept Point Output Power OIP3 F = 900 MHz 22 25 dBm Current Icc F = 900 MHz, Non-RF 20 30 mA Device Voltage Vdd F = 900 MHz, Non-RF 3 4 V * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device.

4/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 600 700 800 900 1000 1100 1200 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] S-parameters & K-factor ( 4 V )

5/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] Schematic S-parameters & K-factor ( 3 V ) APPLICATION CIRCUIT GPS

1575 MHz

+3 V / +4 V Board Layout (FR4, 14x11.3 mm2, 0.8T) 4.2mm * Note: Gain and current can be reduced by controlling VDD to 2V. C3 must be placed as close as possible to the device. Bottom indep(Source_stabcir[m1,::]) (0.000 to 51.000) Source_stabcir[m1,::] indep(Load_stabcir[m1,::]) (0.000 to 51.000) Load_stabcir[m1,::] Parameter Symbol Test Conditions TYP. Unit Power Gain Gp F = 1575 MHz 30 30.5 dB Noise Figure NF F = 1575 MHz 0.8 0.8 dB Input Return Loss RLin F = 1575 MHz -20 -20 dB Output Return Loss RLout F = 1575 MHz -16 -15 dB Reverse Isolation ISO F = 1575 MHz -38 -38 dB 1 dB Gain Compression Output Power Po(1dB) F = 1575 MHz 11 13 dBm rd Intercept Point Output Power OIP3 F = 1575 MHz 22 26 dBm Current Icc F = 1575 MHz, Non-RF 20 30 mA Device Voltage Vdd F = 1575 MHz, Non-RF 3 4 V C2=1.2 pF RF OUT ASL30G RF IN L1=2.2 nH L2=7.5 nH VDD C3=1 mF C1=100 pF C4=10 mF

6/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] S-parameters & K-factor ( 4 V ) indep(Source_stabcir[m1,::]) (0.000 to 51.000) Source_stabcir[m1,::] indep(Load_stabcir[m1,::]) (0.000 to 51.000) Load_stabcir[m1,::]

7/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] Schematic S-parameters & K-factor GPS +1.8 V Board Layout (FR4, 14x11.3 mm2, 0.8T) * Note: Gain and current can be reduced by controlling VDD to 2V. C3 must be placed as close as possible to the device. Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Power Gain Gp F = 1.575 GHz 26 dB Noise Figure NF F = 1.575 GHz 1.0 dB Input Return Loss RLin F = 1.575 GHz -14 dB Output Return Loss RLout F = 1.575 GHz -18 dB Reverse Isolation ISO F = 1.575 GHz -38 dB 1 dB Gain Compression Output Power Po(1dB) F = 1.575 GHz 6 dBm rd Intercept Point Output Power OIP3 F = 1.575 GHz 15 dBm Current Icc F = 1.575 GHz, Non-RF 8.5 mA Bottom indep(Source_stabcir[m1,::]) (0.000 to 51.000) Source_stabcir[m1,::] indep(Load_stabcir[m1,::]) (0.000 to 51.000) Load_stabcir[m1,::] APPLICATION CIRCUIT C2=1 pF RF OUT ASL30G RF IN L1=3.3 nH L2=6.8 nH VDD C3=1 mF C1=10 pF C3=10 mF

8/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. * Test Method: Contact discharge on GPS patch antenna input. Applying 10 times repeated voltage at 1 sec time Interval. Top C2=1.2 pF RF OUT ASL30GRF IN L2=7.5 nH VDD C3=1 mFL1=6.2 nH C1=7.5 pF 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] Schematic S-parameters & K-factor Robust ESD (± 3 kV)* GPS +3 V Board Layout (FR4, 14x11.3 mm2, 0.8T) * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device. Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Power Gain Gp F = 1.575 GHz 30 dB Noise Figure NF F = 1.575 GHz 0.95 dB Input Return Loss RLin F = 1.575 GHz -18 dB Output Return Loss RLout F = 1.575 GHz -18 dB Reverse Isolation ISO F = 1.575 GHz -40 dB 1 dB Gain Compression Output Power Po(1dB) F = 1.575 GHz 11 dBm rd Intercept Point Output Power OIP3 F = 1.575 GHz 22 dBm Current Icc F = 1.575 GHz, Non-RF 20 mA Bottom indep(Source_stabcir[m1,::]) (0.000 to 51.000) Source_stabcir[m1,::] indep(Load_stabcir[m1,::]) (0.000 to 51.000) Load_stabcir[m1,::] APPLICATION CIRCUIT

9/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -5 dBm/tone separated by 1MHz. * Test Method: Contact discharge on GPS patch antenna input. Applying 10 times repeated voltage at 1 sec time Interval. Top C2=1.2 pF RF OUT ASL30GRF IN L2=7.5 nH VDD C3=1 mFL1=6.2 nH C1=7.5 pF 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] Schematic S-parameters & K-factor Robust ESD (± 3 kV)* GPS +1.8 V Board Layout (FR4, 14x11.3 mm2, 0.8T) * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device. Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Power Gain Gp F = 1.575 GHz 26.5 dB Noise Figure NF F = 1.575 GHz 1.25 dB Input Return Loss RLin F = 1.575 GHz -12 dB Output Return Loss RLout F = 1.575 GHz -14 dB Reverse Isolation ISO F = 1.575 GHz -40 dB 1 dB Gain Compression Output Power Po(1dB) F = 1.575 GHz 6 dBm rd Intercept Point Output Power OIP3 F = 1.575 GHz 15 dBm Current Icc F = 1.575 GHz, Non-RF 8.5 mA Bottom indep(Source_stabcir[m1,::]) (0.000 to 51.000) Source_stabcir[m1,::] indep(Load_stabcir[m1,::]) (0.000 to 51.000) Load_stabcir[m1,::] APPLICATION CIRCUIT

10/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1600 1700 1800 1900 2000 2100 2200 2300 2400 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] C2=1.2 pF RF OUT ASL30GL1=1.8 nH L2=5.1 nH VDD C3=1 mF C1=10 pF C4=10 mF Schematic S-parameters & K-factor ( 3 V ) APPLICATION CIRCUIT

1950 MHz

+3 V / +4 V Board Layout (FR4, 14x11.3 mm2, 0.8T) Bottom Parameter Symbol Test Conditions TYP. Unit Power Gain Gp F = 1950 MHz 23 24 dB Noise Figure NF F = 1950 MHz 1.1 1.05 dB Input Return Loss RLin F = 1950 MHz -20 -20 dB Output Return Loss RLout F = 1950 MHz -18 -18 dB Reverse Isolation ISO F = 1950 MHz -34 -34 dB 1 dB Gain Compression Output Power Po(1dB) F = 1950 MHz 11 13 dBm rd Intercept Point Output Power OIP3 F = 1950 MHz 21 24.5 dBm Current Icc F = 1950 MHz, Non-RF 20 30 mA Device Voltage Vdd F = 1950 MHz, Non-RF 3 4 V * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device.

11/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 1600 1700 1800 1900 2000 2100 2200 2300 2400 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] S-parameters & K-factor ( 4 V )

12/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 2100 2200 2300 2400 2500 2600 2700 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] C2=1 pF RF OUT ASL30GRF IN L1=1.5 nH L2=3.9 nH VDD C3=1 mF C1=10 pF C4=10 mF Schematic S-parameters & K-factor ( 3 V ) APPLICATION CIRCUIT

2400 MHz

+3 V / +4 V Board Layout (FR4, 14x11.3 mm2, 0.8T) Bottom Parameter Symbol Test Conditions TYP. Unit Power Gain Gp F = 2400 MHz 23 24 dB Noise Figure NF F = 2400 MHz 1.1 1.05 dB Input Return Loss RLin F = 2400 MHz -20 -20 dB Output Return Loss RLout F = 2400 MHz -18 -18 dB Reverse Isolation ISO F = 2400 MHz -34 -34 dB 1 dB Gain Compression Output Power Po(1dB) F = 2400 MHz 11 13 dBm rd Intercept Point Output Power OIP3 F = 2400 MHz 21 24.5 dBm Current Icc F = 2400 MHz, Non-RF 20 30 mA Device Voltage Vdd F = 2400 MHz, Non-RF 3 4 V * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device.

13/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 2100 2200 2300 2400 2500 2600 2700 -60 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] S-parameters & K-factor ( 4 V )

14/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1MHz. Top 0 500 1000 1500 2000 2500 3000 3500 4000 4500 Stability Factor Frequency (MHz) 2800 3000 3200 3400 3600 3800 4000 4200 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] Parameter Symbol Unit Frequency [MHz] 3300 3800 3300 3800 Power Gain Gp dB 18.5 17 19 17.5 Noise Figure NF dB 1.4 1.6 1.6 1.8 Input Return Loss RLin dB -18 -18 -18 -18 Output Return Loss RLout dB -12.5 -13.5 -12 -13.5 Reverse Isolation ISO dB -30 -28 -29 -28 1 dB Gain Compression Output Power Po(1dB) dBm 12.5 7.5 14 11 rd Intercept Point Output Power OIP3 dBm 21 18 24.5 22 Current Icc mA 22 33 Device Voltage Vdd V 3 4 C2=0.75 pF RF OUT ASL30GRF IN L1=2.2 nH VDD C3=1 mF C1=10 pF C4=10 mF Schematic S-parameters & K-factor ( 3 V ) APPLICATION CIRCUIT 3300 ~ 3800 MHz +3 V / +4 V Board Layout (FR4, 14x11.3 mm2, 0.8T) Bottom * Note: Gain and current can be reduced by controlling VDD to 2 V. C3 must be placed as close as possible to the device.

15/15 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL30G DC-6000MHz MMIC LNA 0 500 1000 1500 2000 2500 3000 3500 4000 4500 Stability Factor Frequency (MHz) 2800 3000 3200 3400 3600 3800 4000 4200 -50 -40 -30 -20 -10 S12 S22 S11 S21 S - parameter [dB] Frequency [MHz] S-parameters & K-factor ( 4 V )