ASL19W | DigiCamel IC Datasheet

Online Datasheet

Read ASL19W online.

ASL19W ASB | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 19

Technical content

1/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Typical Parameters Units Low Noise Frequency MHz 850 2000 2700 Gain dB 20 13 11 S11 dB -20 -20 -16 S22 dB -18 -15 -14 Output IP3 dBm 35.5 37 38 Noise Figure dB 0.9 0.9 1.1 Output P1dB dBm 22 22 22 Supply Current mA 73 73 73 Supply Voltage V 5 5 5 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Parameters Units Min Typ Max Testing Frequency MHz 850 Gain dB 19 20 S11 dB -20 S22 dB -18 Output IP3 dBm 34 35.5 Noise Figure dB 0.9 1.1 Output P1dB dBm 20 22 Supply Current mA 55 73 86 Supply Voltage V 5 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Supply Voltage +6 V Operating Junction Temperature +150°C Input RF Power (CW, 50ohm matched)* 22 dBm Features Description Absolute Maximum Ratings More Information Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 ASB Inc., 4 th FI. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea

20 dB Gain at 850 MHz
0.9 dB NF
22 dBm P1dB
35.5 dBm Output IP3
MTTF > 100 Years
Single Supply The ASL19W, a wideband linear low noise amplifier MMIC, has a low noise and high linearity at low bias current, being suitable for use in both receiver and transmitter of telecommunication systems up to 3 GHz. S11 down to –20 dB is easily achieved for low noise application to provide a good productivity. The ampli- fier is available in an SOT-89 package and passes through the stringent DC, RF, and reliability tests.

Applications

CDMA, GSM, W-CDMA, PCS Gain Block Amplifier
Low Noise Amplifier
IF Amplifier
WiBro/WiMAX Amplifier
Bluetooth Amplifier
Wireless LAN Amplifier Product Specifications Typical Performance ASL19W Package Style: SOT-89

2/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC CDMA WCDMA CDMA WCDMA RD (ohm) RB (ohm) Vd (V) Ic (mA) NF (dB) OIP3 (dBm) NF (dB) OIP3 (dBm) RD (ohm) RB (ohm) Vd (V) Ic (mA) NF (dB) OIP3 (dBm) NF (dB) OIP3 (dBm) 8.2 * Test Application Circuit : ASL19W CDMA / WCDMA application circuit * OIP3 Test Condition : Freq. – 894MHz / – 2140MHz, +10dBm output power per tone * Vd : Applied voltage to the device OIP3 & Noise Figure Vs. Bias Resistor

3/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor Frequency (MHz) 900 2000 Magnitude S21 (dB) 19 13 Magnitude S11 (dB) -7 -7 Magnitude S22 (dB) -18 -18 Output P1dB (dBm) 22 22 Output IP3 (dBm) 37 37.5 Noise Figure (dB) 0.7 0.9 Supply Voltage (V) 5 5 Current (mA) 73 73 APPLICATION CIRCUIT Low Noise 500 ~ 3500 +5 V 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) -40 o c o c o c Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. C1=100 pF L1=39 nH C2=100 pF Vcc=5 V RF IN RF OUT C3=100 pF C4=10 nF ASL19W D1=5.6V Zener Diode L2=39 nH 4.5 mm R =6.2 kΩB DR =8.2 Ω

4/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC P1dB vs. Temperature Current vs. Temperature Output IP3 vs. Tone Power (Frequency = 2000 MHz) Output IP3 vs. Temperature Gain vs. Temperature -60 -40 -20 0 20 40 60 80 100 100 Current (mA) Temperature ( o -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 900 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 2000 MHz -60 -40 -20 0 20 40 60 80 100 Output IP3 (dBm) Temperature ( o Frequency = 2000 MHz 4 5 6 7 8 9 1 01 11 21 31 41 51 61 7 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c

5/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 70 150 300 Magnitude S21 (dB) 24.5 24 22.5 Magnitude S11 (dB) -13 -13 -10 Magnitude S22 (dB) -15 -18 -18 Output P1dB (dBm) 21 21 21 Output IP3 (dBm) 32 32.5 34 Noise Figure (dB) 2.9 2.9 2.8 Supply Voltage (V) 5 5 5 Current (mA) 73 73 73 Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. IF 30 ~ 400 +5 V Vcc=5 V RF IN RF OUT C3=100 pF ASL19W D1=5.6V Zener Diode R =6.2 kΩB DR =8.2 Ω C1=1 µF R1=100 Ω C2=1 µF L1=1 µΗ C4=10 µF 0 100 200 300 400 500 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)

6/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 450 Magnitude S21 (dB) 23.5 Magnitude S11 (dB) -18 Magnitude S22 (dB) -18 Output P1dB (dBm) 21.5 Output IP3 (dBm) 32 Noise Figure (dB) 1.15 Supply Voltage (V) 5 Current (mA) 73 Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. 450 +5 V 0 200 400 600 800 1000 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) C1=150 pF L1=39 nH C2=150 pF Vcc=5 V RF IN RF OUT C3=100 pF C4=10 nF ASL19W D1=5.6V Zener Diode L2=18 nH 4.5 mm R =6.2 kΩB DR =8.2 Ω

7/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 698~787 Magnitude S21 (dB) 20 Magnitude S11 (dB) -18 Magnitude S22 (dB) -14 Output P1dB (dBm) 22 Output IP3 (dBm) 35 Noise Figure (dB) 0.8 Supply Voltage (V) 5 Current (mA) 73 LTE 698 ~ 787 +5 V Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. C1=100 pF L1=82 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF C5=10 nF ASL19W D1=5.6V Zener Diode L3=47 nH C2=4 pF L2=8.2 nH R =6.2 kΩ B DR =8.2 Ω 400 500 600 700 800 900 1000 S21 [dB] Frequency [MHz] 400 500 600 700 800 900 1000 -30 -25 -20 -15 -10 S11 [dB] Frequency [MHz] 400 500 600 700 800 900 1000 -25 -20 -15 -10 S22 [dB] Frequency [MHz] 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)

8/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 824 894 Magnitude S21 (dB) 20 20 Magnitude S11 (dB) -15 -18 Magnitude S22 (dB) -18 -15 Output P1dB (dBm) 22 22 Output IP3 (dBm) 35.5 35.5 Noise Figure (dB) 0.9 0.95 Supply Voltage (V) 5 5 Current (mA) 73 73 Low Noise CDMA 824 ~ 894 +5 V 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 600 700 800 900 1000 1100 1200 Gain (dB) Frequency (MHz) -40 o c o c o c 600 700 800 900 1000 1100 1200 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 600 700 800 900 1000 1100 1200 -30 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c C1=100 pF L1=39 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF C5=10 nF ASL19W D1=5.6V Zener Diode L3=47 nH C2=3.3 pF L2=6.8 nH R =6.2 kΩ B DR =8.2 Ω Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB.

9/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC P1dB vs. Temperature Current vs. Temperature Output IP3 vs. Tone Power (Frequency = 824 MHz) Output IP3 vs. Temperature Gain vs. Temperature -60 -40 -20 0 20 40 60 80 100 100 Current (mA) Temperature ( o -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 850 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 824 MHz -60 -40 -20 0 20 40 60 80 100 Output IP3 (dBm) Temperature ( o Frequency = 824 MHz 456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c

10/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. Frequency (MHz) 1750~1870 Magnitude S21 (dB) 13.5 Magnitude S11 (dB) -18 Magnitude S22 (dB) -15 Output P1dB (dBm) 21 Output IP3 (dBm) 37 Noise Figure (dB) 0.9 Supply Voltage (V) 5 Current (mA) 73 Low Noise PCS 1750 ~ 1870 +5 V 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) C1=100 pF L1=39 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF C5=10 nF ASL19W D1=5.6V Zener Diode L2=39 nH C2=1 pF R =6.2 kΩ B DR =8.2 Ω 4.5 mm

11/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) Frequency (MHz) 1850~1920 Magnitude S21 (dB) 14.5 Magnitude S11 (dB) -15 Magnitude S22 (dB) -15 Output P1dB (dBm) 22 Output IP3 (dBm) 37 Noise Figure (dB) 0.9 Supply Voltage (V) 5 Current (mA) 73 C1=100 pF L1=39 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF C5=10 nF ASL19W D1=5.6V Zener Diode L2=39 nH C2=1.2 pF 4 mm R =6.2 kΩ B DR =8.2 Ω 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) Low Noise US PCS 1850 ~ 1920 +5 V

12/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 1920~1980 2110~2170 Magnitude S21 (dB) 13.5 13 Magnitude S11 (dB) -18 -18 Magnitude S22 (dB) -15 -14 Output P1dB (dBm) 22 22 Output IP3 (dBm) 37 37 Noise Figure (dB) 0.9 0.9 Supply Voltage (V) 5 5 Current (mA) 73 73 Low Noise WCDMA 1920 ~ 2170 +5 V 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Gain (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S11 (dB) Frequency (MHz) -40 o c o c o c 0 500 1000 1500 2000 2500 3000 3500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) -40 o c o c o c Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. C1=100 pF L1=39 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF C5=10 nF ASL19W D1=5.6V Zener Diode L2=39 nH C2=1.2 pF 3.5 mm R =6.2 kΩ B DR =8.2 Ω

13/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC P1dB vs. Temperature Current vs. Temperature Output IP3 vs. Tone Power (Frequency = 2170 MHz) Output IP3 vs. Temperature Gain vs. Temperature -60 -40 -20 0 20 40 60 80 100 100 Current (mA) Temperature ( o -60 -40 -20 0 20 40 60 80 100 Gain (dB) Temperature ( o Frequency = 2000 MHz -60 -40 -20 0 20 40 60 80 100 P1dB (dBm) Temperature ( o Frequency = 2170 MHz -60 -40 -20 0 20 40 60 80 100 Output IP3 (dBm) Temperature ( o Frequency = 2170 MHz 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Output IP3 (dBm) Pout per Tone (dBm) -40 o c o c o c

14/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 2300 2500 2700 Magnitude S21 (dB) 12 11.5 11 Magnitude S11 (dB) -18 -18 -16 Magnitude S22 (dB) -17 -16 -14 Output P1dB (dBm) 22 22 22 Output IP3 (dBm) 37.5 37.5 38 Noise Figure (dB) 1.0 1.1 1.1 Supply Voltage (V) 5 5 5 Current (mA) 73 73 73 Low Noise 2300 ~ 2700 +5 V Note: A shunt R B is a bias resistor requisite to operate ASL19W properly, while R D as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different R B values with minimized loss only in OIP3 and P1dB. 2000 2200 2400 2600 2800 3000 Gain (dB) Frequency (MHz) 2000 2200 2400 2600 2800 3000 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 2000 2200 2400 2600 2800 3000 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) C1=100 pF L1=39 nH C3=100 pF Vcc=5 V RF IN RF OUT C4=100 pF ASL19W D1=5.6V Zener Diode L2=39 nH C2=1 pF 2.5 mm R =6.2 kΩ B DR =8.2 Ω C5=1 µF

15/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of -3 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT Frequency (MHz) 176 264 Gain Flatness (dB) 0.8 Magnitude S21 (dB) 24.3 23.6 Magnitude S11 (dB) -10 -10 Magnitude S22 (dB) -14 -15 Output P1dB (dBm) 20 20 Output IP3 (dBm) 30 30 Noise Figure (dB) 1.7 1.6 Supply Voltage (V) 5 5 Current (mA) 37 37 0 100 200 300 400 500 Gain (dB) Frequency (MHz) 0 100 200 300 400 500 -20 -15 -10 S11 (dB) Frequency (MHz) 0 100 200 300 400 500 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) DVB-T ( V band ) 176 ~ 264 +5 V C1=10 nF L1=330 nH C2=100 pF Vcc=5 V RF IN RF OUT C3=100 pF C4=10 nF ASL19W R2=4.7 kΩ R3=8.2 Ω R1=230 Ω

16/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of -3 dBm/tone sepa- rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT DVB-T ( U band ) 478 ~ 862 +5 V C1=33 pF L2=39 nH C4=33 pF Vcc=5 V RF IN RF OUT C5=100 pF C6=10 nF ASL19W L1=39 nH R1=4.7 kΩ R3=8.2 Ω C2=10 pF R2=360 Ω C3=3.3 pF 0 200 400 600 800 1000 Gain (dB) Frequency (MHz) 0 200 400 600 800 1000 -30 -25 -20 -15 -10 S11 (dB) Frequency (MHz) 0 200 400 600 800 1000 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz) Frequency (MHz) 478 862 Gain Flatness (dB) 0.6 Magnitude S21 (dB) 17.3 16.8 Magnitude S11 (dB) -9 -12 Magnitude S22 (dB) -9 -20 Output P1dB (dBm) 20 16 Output IP3 (dBm) 28 25 Noise Figure (dB) 1.43 1.48 Supply Voltage (V) 5 5 Current (mA) 37 37

17/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT GPS 1575 +3.3 V Frequency (MHz) 1575 Magnitude S21 (dB) 14.0 Magnitude S11 (dB) -14 Magnitude S22 (dB) -14 Output P1dB (dBm) 17 Output IP3 (dBm) 27.5 Noise Figure (dB) 1.1 Supply Voltage (V) 3.3 Current (mA) 20 C1=100 pF L1=10 nH C3=100 pF Vcc=3.3 V RF IN RF OUT C4=100 pF ASL19W D1=5.6V Zener Diode L3=47 nH C2=1.8 pF L2=2.2 nH R =6.8 kΩ B DR =11 Ω C5=1 µF R1=270 Ω 1400 1450 1500 1550 1600 1650 1700 1750 1800 Gain (dB) Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -20 -15 -10 S11 (dB) Frequency (MHz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -25 -20 -15 -10 S22 (dB) Frequency (MHz) 0 500 1000 1500 2000 2500 3000 3500 Stability Factor Frequency (MHz)

18/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC NF OIP3 P1dB

19/19 ASB Inc. • sales@asb.co.kr • Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Mounting Recommendation Outline Drawing Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 an d exposed pad of the device fo r better RF and thermal performance, as shown in the draw- in g at the left side. (Unit: mm) (Unit: mm) Function Pin No. Input 1 Ground 2 Output 3 ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level

Product Information

ASL19W specifications and overview.

Summary

DC-3000 MHz High Linearity LNA MMIC February 2009

Description

DC-3000 MHz High Linearity LNA MMIC February 2009

Source title ASL19W Datasheet(PDF) - Advanced Semiconductor Business Inc.

Related Parts

More parts from the same family.

Browse manufacturer