ASL19D

ASL19D ASB | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

1/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 Parameters Units Min Typ Max Frequency MHz 2000 Gain dB 23 24.5 S11 dB -18 S22 dB -10 Output IP3 dBm 34 36 Noise Figure dB 0.95 1.1 Output P1dB dBm 18 19 Current mA 60 90 120 Device Voltage V 3 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Device Voltage +5 V Operating Junction Temperature +150°C Input RF Power (CW, 50ohm matched)* 22 dBm Features Description Package Style: DFN-6

• 24.5 dB Gain at 2 GHz · 36 dBm OIP3 at 2 GHz · 19 dBm P1dB at 2 GHz · 0.95 dB NF at 2 GHz · Two-stage LNA ASL19D is a two-stage LNA, which has a low noise, high gain, and high linearity over a wide range of frequency up to 5 GHz. It is also suitable for use in the low noise amplifier block of the mobile wireless systems of PCS, WCDMA, WiBro, WiMAX, and WLAN so on. The amplifier is available in a DFN-6 package and passes the stringent DC, RF, and reliability tests. Applications ·GPS Receiver ·CDMA, GSM, W-CDMA, PCS ·WiBro, WiMax, WLAN ·Gain Block ·IF Amplifier Product Specifications* More Information Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 ASB Inc., 4th FI. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea Typical Performance Application Circuit ·1700 ~ 2700 MHz ·3500 MHz Absolute Maximum Ratings Pin Configuration Pin No. Function 1 1st (2nd) stage RF IN 2,5 GND or NC 3 2nd (1st) stage RF OUT 4 2nd (1st) stage RF IN 6 1st (2nd) stage RF OUT

2/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 ASL19D High Gain, Low Noise Amplifier Outline Drawing Mounting Recommendation (in mm) Note: 1. Backside metal paddle is RF and DC ground. 2. Both of pin 1 and pin 4 is marked for reference and can be used as an RF input since ASL19D has two chips in a package in which dies are in 180° symmetry. Pin No. Function Pin No. Function. 1 1st (2nd) stage RF IN 4 2nd (1st) stage RF IN 2 GND or NC 5 GND or NC 3 2nd (1st) stage RF OUT 6 1st (2nd) stage RF OUT ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level ASL19D Part No.

3/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 ASL19D High Gain, Low Noise Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT 1700 ~ 2700 MHz +3 V 0500100015002000250030003500012345 Stability FactorFrequency (MHz) 14001600180020002200240026002800300005101520253035 Gain (dB)Frequency (MHz) -40oc 25oc 85oc 140016001800200022002400260028003000-30-25-20-15-10-50 S11 (dB)Frequency (MHz) -40oc 25oc 85oc 140016001800200022002400260028003000-25-20-15-10-50 S22 (dB)Frequency (MHz) -40oc 25oc 85oc ASL19DRF IN RF OUTC1=10 pFC2=10 pF C3=8 pFL3=39 nHC4=100 pFC5=1 mFC6=100 pFC7=1 mF R1= 8.2 kW R2=10 kW L2=39 nH Vcc=3 V L1=39 nH

4/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 ASL19D High Gain, Low Noise Amplifier P1dB vs. Temperature Current vs. Temperature Output IP3 vs. Tone Power (Frequency = 2000 MHz) Output IP3 vs. Temperature Gain vs. Temperature -60-40-20020406080100406080100120140160 Current (m A )Tem perature (oC) -60-40-20020406080100202224262830 Gain (dB)Tem perature (oC)Frequency = 2000 MHz -60-40-2002040608010014161820222426 P1dB (dBm )Tem perature (oC)Frequency = 2000 MHz-60-40-20020406080100253035404550 Output IP3 (dBm )Tem perature (oC)Frequency = 2000 MHz 2345678910111213141516101520253035404550 Output IP3 (dBm )Pout per Tone (dBm ) -40oc 25oc 85oc

5/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 ASL19D High Gain, Low Noise Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT 1700 ~ 2700 MHz +5 V ASL19DRF IN RF OUTC1=10 pF C2=10 pF C3=8 pFL3=39 nH C4=100 pFC5=1 mFC6=100 pFC7=1 mF R1= 4.7 kW R2=5.6 kW L2=39 nH Vcc=5 V L1=39 nH R3=6.2 W 14001600180020002200240026002800300005101520253035 Gain (dB)Frequency (MHz)140016001800200022002400260028003000-25-20-15-10-50 S11 (dB)Frequency (MHz) 140016001800200022002400260028003000-25-20-15-10-50 S22 (dB)Frequency (MHz)0500100015002000250030003500012345 Stability FactorFrequency (MHz)

6/6 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2010 ASL19D High Gain, Low Noise Amplifier 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor APPLICATION CIRCUIT 3500 MHz +3 V Frequency (MHz) 3500 Magnitude S21 (dB) 16 Magnitude S11 (dB) -18 Magnitude S22 (dB) -10 Output P1dB (dBm) 20 Output IP31) (dBm) 37.5 Noise Figure (dB) 1.6 Device Voltage (V) 3 Current (mA) 90 2000250030003500400045005000051015202530 Gain (dB)Frequency (MHz)2000250030003500400045005000-30-25-20-15-10-50 S11 (dB)Frequency (MHz) 2000250030003500400045005000-20-15-10-505 S22 (dB)Frequency (MHz)0500100015002000250030003500012345 Stability FactorFrequency (MHz) ASL19DRF IN RF OUTC1=10 pFC3=10 pF C4=3 pFL3=22 nHC5=100 pFC6=1 mFC7=100 pFC8=1 mF R1= 8.2 kW R2=10 kW L2=22 nH Vcc=3 V L1=22 nHC2=0.5 pF