ASL13C ASB | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
1/4 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2012 Parameters Rating Operating Case Temperature -40 to +85°C Storage Temperature -40 to +150°C Device Voltage +6 V Operating Junction Temperature +150°C Input RF Power (CW, 50ohm matched)* 22 dBm Features Description Package Style: SOT-363 Typical Performance Absolute Maximum Ratings
- 13 dB Gain at 2000 MHz ·22 dBm P1dB at 2000 MHz ·37 dBm OIP3 at 2000 MHz ·0.75 dB NF at 2000 MHz ·MTTF > 100 Years ·Single Supply The ASL13C is a wideband linear low noise amplifi-er MMIC, has a low noise and high linearity at low bias current, being suitable for use in both receiver and transmitter of telecommunication systems up to 3 GHz. S11 down to –20 dB is easily achieved for low noise application to provide a good productivity. The amplifier is available in an SOT-363 package and passes through the stringent DC, RF, and relia-bility tests. Application Circuit · CDMA/ GSM · WCDMA Product Specifications Pin Configuration Pin No. Function 1 RF IN 4 RF OUT / Bias 2,3,5,6 GND
2/4 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2012 ASL13C 5-3000 MHz MMIC Amplifier Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding consid-erations. 2. We recommend that the ground via holes be placed on the bottom of lead pin 2 for better RF and thermal per-formance, as shown in the drawing at the left side. Pin NO. Function Pin NO. Function. 1 RF IN 4 RF OUT / Bias 2 GND 5 GND 3 GND 6 GND Mounting Recommendation (in mm) Outline Drawing ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level
3/4 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2012 ASL13C 5-3000 MHz MMIC Amplifier L2=100 nHC3=100 pFRF OUTASL13CC2=100 pFRF IN C4=100 pFC5=10 nF Vcc=5V L1=39 nHC1=3 pF D BR =5.6 kW R =8.2 W R1 =1.6 kWC6=100 pF L3=5.6 nH 6007008009001000110012000510152025 Gain (dB)Frequency (MHz)600700800900100011001200-30-25-20-15-10-50 S11 (dB)Frequency (MHz) 600700800900100011001200-30-25-20-15-10-50 S22 (dB)Frequency (MHz) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa-rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor CDMA & GSM 824 ~ 960 +5 V 0500100015002000250030003500012345 Stability FactorFrequency (MHz) Note: A shunt RB is a bias resistor requisite to operate ASL13W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB.
4/4 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 October 2012 ASL13C 5-3000 MHz MMIC Amplifier L2=12 nHC3=68 pFRF OUTASL13CC2=68 pFRF IN C4=100 pFC5=10 nF Vcc=5V L1=39 nHC1=1 pF D BR =5.6 kW R =8.2 W R1 =1.6 kWC6=100 pF 1500175020002250250005101520 Gain (dB)Frequency (MHz)15001750200022502500-30-25-20-15-10-50 S11 (dB)Frequency (MHz) 15001750200022502500-30-25-20-15-10-50 S22 (dB)Frequency (MHz) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone sepa-rated by 1 MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor Note: A shunt RB is a bias resistor requisite to operate ASL13W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. 0500100015002000250030003500012345 Stability FactorFrequency (MHz) WCDMA 1920 ~ 2170 +5 V