ASL09C ASB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

1/3 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 Features Description Absolute Maximum Ratings

  • Same circuit over 800~2700 MHz ·12.8 dB Gain at 1950 MHz ·19.5 dBm P1dB at 1950 MHz ·35 dBm Output IP3 at 1950 MHz ·0.85 dB NF at 1950 MHz ·MTTF > 100 Years ·Single Supply The ASL09C, a wideband linear low noise amplifier MMIC, has a low noise and high linearity at low bias current, being suitable for use in both receiver and transmitter of telecommunication systems up to 3.5 GHz. S11 down to –18 dB is easily achieved for low noise application to provide a good productivity. The amplifier is available in an SOT-89 package and pass-es through the stringent DC, RF, and reliability tests. Application Circuit ·800 ~ 2700 MHz Product Specifications Typical Performance

2/3 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL09C 5-4000 MHz High Linearity LNA MMIC Pin No. Function 1 RF IN 2 GND 3 RF OUT / Bias Mounting Recommendation (in mm) Outline Drawing ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow ESD Classification & Moisture Sensitivity Level ASL09C Pxxxx Lot No. Part No. Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side.

3/3 ASB Inc. · sales@asb.co.kr · Tel: +82-42-528-7223 September 2012 ASL09C 5-4000 MHz High Linearity LNA MMIC C1=82 pFL1=56 nHC2=82 pFRF IN RF OUTC3=100 pF ASL09C C4=10 nF L2=18 nH Vs=5 VR1 =10W C5=2 pFR2=2 KW 05001000150020002500300035000510152025 Gain (dB)Frequency (MHz)0500100015002000250030003500-30-25-20-15-10-50 S11 (dB)Frequency (MHz) 0500100015002000250030003500-20-15-10-50 S22 (dB)Frequency (MHz) 1) OIP3 is measured with two tones at an output power of +5 dBm/tone sepa-rated by 1 MHz. 0 50010001500200025003000350040000 Stability Factor Frequency (MHz) Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters & K-factor 800 ~ 2700 +5 V