AR15W LUMINIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 1 - 11 ga. galvanized pressure mounting plate. 2 - Cast aluminum isolated ballast compartment. 3 - Cone shaped white translucent conical housing 4 - Cast aluminum sealed hinged glass lens frame, with perimeter memory retention embedded silicone gasket . 5 - Stainless steel recessed captive hexagonal cap screws. 6 - Tempered clear glass lens. 7 - Semi-specular partial down light reflector. AR15W: Regressed clear tempered glass lens. AR15WL: White translucent acrylic frosted conical dropped lens. Down light only. ASH: Low brightness full cut-off 20”ø aluminum shade. Compatible with AR15W-AR15WL UL. Wet Location. Certification (Lamps by others) Light source selection

120 V Standard factory

(If no voltage is specified) For other voltages, please specify with catalog number. 208 V 240 V 277 V 347 V

347 V (To specify)

MH (ED17) CF (Gx24q) M50 M70 HPS (ED17) H50 H70 Single lamp F157 F170 F226 F232 F242 CF (Gx24q) Two lamp Model# Voltage Finish Options H.I.D. Mounting & E.P.A. COMP. FLUO. For options details and specifications, please refer to pages 22 - 41 luminaires may be altered for design improvements or discontinued without prior notice. Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. Photometry Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color (Refer to color chart) Specification ARGONWall mountL U M I IN S Hinged frame Max.weight: 21 lbs. EPA: 0.65 Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others ) additional separate mounting holes are provided with wall plate. 17 1/2” 19 1/2” 13 1/2” 11 1/2” 7 1/2” 13 1/2” White translucent conical housing 5 1/8” 3 1/2” Page 21 For pole mounting, please refer to page 22 Note: EM optional battery test switch and pilot lamp are installed remotely. (See page 72) Available for wall mounted luminaires only Accessories CP: Pole mounting adaptor. see page 22 Electrical FS: Fuse PH1: 120/277V photo cell PH2: 347V photo cell EM42S: 1 lamp (26/32/42W) EM battery. AR15W AR15WL AR15W . AR15WL AR15W Argon with conical lens AR15WL Argon with conical lens ASH: Optional 20”ø shade. Adaptable to AR15W & AR15WL Note: 50W.HPS is available with 120/277V only.

Mounting: General notes : AR10L-CP AR12-CP AR10-ASH-CP (With flat lens & shade.) AR10WL-ASH-CP (With conical lens & shade.) AR15-CP Installation: Connects to a standard 4” or 5” O.Dia. x .125” thick wall pole Please refer to corresponding specification sheet for desired luminaire detail. AR15L-CP AR10-CP AR12L-CP AR12-ASH-CP (With flat lens & shade.) AR12L-ASH-CP (With conical lens & shade.) 5” 2 5/8” 2 5/8” 21 1/2” 23” EPA AR10L-CP AR12L-CP AR15L-CP AR10-CP AR12-CP AR15-CP AR10-ASH-CP AR12-ASH-CP AR15-ASH-CP .93 .95 .95 1.27 AR15-ASH-CP (With flat lens & shade.) AR15L-ASH-CP (With conical lens & shade.) Argon with flat lens Argon with conical lens Argon with lens/shade combination With top glow ring With Closed top With top glow ring With Closed top With Closed top With top glow ring White translucent diffuser. White translucent diffuser.White translucent diffuser. ARGONPole mount attachments luminaires may be altered for design improvements or discontinued without prior notice. L U M I IN S Page 22 Pole adaptor is factory designed and made to fit with 4” or 5” dia. pole. Please refer to page 145 for additional details. RA3 and RA4 Options are available with a single lamp installation PAA410-CP PAA412-CP PAA414-CP PAA416-CP PAA418-CP PAA420-CP PAA510-CP PAA512-CP PAA514-CP PAA516-CP PAA518-CP PAA520-CP PXD10-CP PXD12-CP PXD14-CP PXD16-CP PXD18-CP PXD20-CP 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Compatible poles listing. For poles details and specification, please refer to pages 140 to 144 Pole height