AP4890B APLUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 1 AP4890B --- 1W AUDIO POWER AMPLIFIER 1. DESCRIPTION : The AP4890B is an audio power amplifier designed for portable communication device applications such as mobile phone applications. The AP4890B is capable of delivering 1W of continuous average power to an 8Ω BTL and with less than 1% distortion (THD+N) from a 5.0V power supply, and 350mW to a 8Ω BTL load from a 3V power supply. The AP4890B provides high quality audio while requiring few extemal components and minimal power consumption. It features a low-power shutdown mode, which is achieved by driving the SHUTDOWN pin with logic low. The AP4890B contains circuitry to prevent from “pop and click” noise that would otherwise occur during turn-on and turn-off transitions.For maximum flexibility, the AP4890B provides an externally controlled gain (with resistors), as well as an externally controlled turn-on and turn-off times (with the bypass capacitor). 2. FEATURE : ƒ 2.5-5.2V operation ƒ 65dB PSRR at 217Hz, VDD=5V ƒ 0.1µA ultra low current shutdown mode ƒ Improved pop & click circuitry ƒ No output coupling capacitors, snubber networks or bootstrap capacitors required ƒ Thermal shutdown protection ƒ External gain configuration capability ƒ RoHS compliant and 100% lead(Pb)-free ƒ APPLICATIONS ƒ Mobile Phones ƒ PDAs ƒ Portable electronic devices

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 2 3. PIN CONFIGURATION (Top View) : 4. PIN DESCRIPTION : PIN PIN I/O DESCRIPTION SHUT DOWN-B 1 I The device enters in shutdown mode when a low level is applied on this pin BYPASS 2 I Bypass capacitor pin which provides the common mode voltage +IN 3 I Positive input of the first amplifier, receives the common mode voltage -IN 4 I Negative input of the first amplifier, receives the audio input signal. Connected to the feedback resistor Rf and to the input resistor Rin. VO1 5 O Negative output of the AP4890B. Connected to the load and to the feedback resistor Rf VDD 6 I Analog VDD input supply. GND 7 Ground connection for circuitry. VO2 8 O Positive output of the AP4890B.

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 3 5. ABSOLUTE MAXIMUN RATINGS : 6. ELECTRICAL CHARACTERISTICS VDD=5V, TA=25℃ Symbol Parameter Conditions AP4890B UNIT MIN TYP MAX IDD Quiescent Power Supply Current VIN=0V, Io=0A, No load 2.4 5 mA VIN=0V, Io=0A, 8Ω load 2.5 5 mA ISD Shutdown Current V SHUT DOWN=0V 0.1 2.0 µA VSDIH Shutdown Voltage Input High 1.2 V VSDIL Shutdown Voltage Input Low 0.4 V VOS Output Offset Voltage 5 25 mV ROUT-GND Resistor Output to GND 9 10 11 k Ω PO Output Power (8Ω) THD=1%; f=1kHz 1.1 W TWU Wake-up time 170 220 ms TSD Thermal Shutdown Temperature 150 170 ℃ THD+N Total Harmonic Distortion + Noise PO=0.4 Wrms; f=1kHz 0.15 % PSRR Power Supply Rejection Ratio Vripple=200mV sine p-p Input Terminated with 10 ohms to ground 55 65(f=217Hz) 67(f=1kHz) dB TSDT Shutdown Time 8 Ω load 1.0 ms

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 4

6.1 ELECTRICAL CHARACTERISTICS VDD=3V, TA=25 ℃

Symbol Parameter Conditions AP4890B UNIT MIN TYP MAX IDD Quiescent Power Supply Current VIN=0V, Io=0A, No load 1.8 4 mA VIN=0V, Io=0A, 8Ω load 1.9 4 mA ISD Shutdown Current V SHUT DOWN=0V 0.1 2.0 µA VSDIH Shutdown Voltage Input High 1.2 V VSDIL Shutdown Voltage Input Low 0.4 V VOS Output Offset Voltage 5 25 mV ROUT-GND Resistor Output to GND 9 10 11 k Ω PO Output Power (8Ω) THD=1%; f=1kHz 0.28 0.35 W TWU Wake-up time 120 180 ms TSD Thermal Shutdown Temperature 150 170 ℃ THD+N Total Harmonic Distortion + Noise PO=0.4 Wrms; f=1kHz 0.15 % PSRR Power Supply Rejection Ratio Vripple=200mV sine p-p Input Terminated with 10 ohms to ground 45 65(f=217Hz) 66(f=1kHz) dB 6.2 ELECTRICAL CHARACTERISTICS VDD=2.6V, TA=25 ℃ Symbol Parameter Conditions AP4890B UNIT MIN TYP MAX IDD Quiescent Power Supply Current VIN=0V, Io=0A, No load 1.7 mA ISD Shutdown Current V SHUT DOWN=0V 0.1 µA PO Output Power (8Ω) Output Power (4Ω) THD=1%; f=1kHz 0.25 0.32 W THD+N Total Harmonic Distortion + Noise PO=0.4 Wrms; f=1kHz 0.15 % PSRR Power Supply Rejection Ratio Vripple=200mV sine p-p Input Terminated with 10 ohms to ground 55 55(f=217Hz) 56(f=1kHz) dB

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 5 7. TYPICAL APPLICATION CIRCUIT :

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 6

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 7 Application for VOICE OTP --- aP89xx series IC : PS : the Rdac about 680 ~ 1K Ohm

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 8

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 9 ƒ Application for VOICE OTP --- aP89xx series IC & SVR volume adjust :

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 10

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 11 ƒ Application for VOICE OTP --- aIVRxx series IC & SVR volume adjust : PS : The aIVRxx series IC must be output [ Busy-H ] to control the shutdown pin of AP4890 IC for standby current control Application for VOICE OTP --- aIVRxx series IC :

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 12 ƒ PACKAGE : DIP-8

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 13 ƒ PACKAGE : SOP-8

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 14 PACKAGE : MSOP-8

INTEGRATED CIRCUITS INC.--- AP4890B http://www.aplusinc.com.tw Page / 15 Tel : 886-2-2782-9266 Ver1.2 15 ƒ REVISION HISTORY : Date Revision # Description Page July.22.2009 1.0 First Release Aug.27.2009 1.1 Add the MSOP-8 outline 14