AP220N03PT APME | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司
Description
The AP220N03P/T uses advanced trench technology to provide excellent RDS(ON), low gate charge and operation with gate voltages as low as 4.5V. This device is suitable for use as a Battery protection or in other Switching application. General Features VDS=30V ID =220A RDS(ON) < 2.2mΩ @ VGS=10V （Type：1.8mΩ） Application Battery protection Load switch Uninterruptible power supply Package Marking and Ordering Information Product ID Pack Marking Qty(PCS) AP220N03P TO-220-3L AP220N03P XXXX YYYY 1000 AP220N03T TO-263-3L AP220N03T XXXX YYYY 800 Absolute Maximum Ratings (TC=25℃unless otherwise noted) Symbol Parameter Rating Units VDS Drain-Source Voltage 30 V VGS Gate-Source Voltage ±20 V ID@TC=25℃ Continuous Drain Current, VGS @ 10V1 220 A ID@TC=75℃ Continuous Drain Current, VGS @ 10V1 135 A IDM Pulsed Drain Current2 880 A EAS Single Pulse Avalanche Energy3 671 mJ IAS Avalanche Current 37 A PD@TC=25℃ Total Power Dissipation4 291 W TSTG TJ Operating Junction /Storage Temperature Range -55 to 150 ℃ RθJA Thermal Resistance Junction-Ambient 1 25 ℃/W RθJC Thermal Resistance Junction-Case1 2.2 ℃/W
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司 Electrical Characteristics (TJ=25 ℃, unless otherwise noted) Symbol Parameter Conditions Min. Typ. Max. Unit V(BR)DSS Drain-Source Breakdown Voltage ID = 250mA, VGS = 0V 30 - - V IDSS Zero Gate Voltage Drain Current VDS = 30V, VGS = 0V - - 1.0 mA IGSS Gate-Body Leakage Current VDS = 0V, VGS = ±20V - - ±100 nA VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250mA 1.2 1.6 2.5 V RDS(ON) Static Drain-Source ON-Resistance(4) VGS = 10V, ID = 30A - 1.8 2.2 mW Rg Gate Resistance f = 1MHz - 2.1 - W Ciss Input Capacitance VGS = 0V, VDS = 15V, f = 1MHz - 6278 - pF Coss Output Capacitance - 863 - pF Crss Reverse Transfer Capacitance - 532 - pF Qg Total Gate Charge VGS = 0 to 10V VDS = 15V, ID = 30A - 108 - nC Qgs Gate Source Charge - 20 - nC Qgd Gate Drain("Miller") Charge - 20 - nC td(on) Turn-On DelayTime VGS = 10V, VDD = 15V ID= 30A, RGEN = 3W - 13 - ns tr Turn-On Rise Time - 29 - ns td(off) Turn-Off DelayTime - 85 - ns tf Turn-Off Fall Time - 50 - ns IS Maximum Continuous Body Diode Forward Current - - 190 A ISM Maximum Pulsed Body Diode Forward Current - - 761 A VSD Body Diode Forward Voltage VGS = 0V, IS = 20A - 1.2 V trr Body Diode Reverse Recovery Time IF = 20A, di/dt = 100A/us - 28 - ns Qrr Body Diode Reverse Recovery Charge - 16 - nC Note : 1、The data tested by surface mounted on a 1 inch2 FR-4 board with 2OZ copper. 2、The data tested by pulsed , pulse width ≦ 300us , duty cycle ≦ 2% 3、The EAS data shows Max. rating . The test condition is VDD=24V,VGS=10V,L=0.5mH,IAS=34A 4、The power dissipation is limited by 175℃ junction temperature 5、The data is theoretically the same as ID and IDM , in real applications , should be limited by total power dissipation.
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司 Package Mechanical Data:TO-220C-3L Symbol Dim in mm Min Typ Max A 4.25 4.5 4.7 A1 1.15 1.3 1.45 A2 2.15 2.35 2.55 b 0.65 0.8 0.95 b1 1.15 1.35 1.55 c 0.35 0.5 0.65 D 14.3 15.3 16.3 D1 8.8 9.1 9.4 D2 6.3REF E 9.7 10 10.3 E3 7 8 9 e 2.54BSC e1 5.08BSC L 12.7 13.5 13.9 L1 3.1 3.4 H 6 6.5 6.85 Q 2.6 2.8 3 ϕ 3.4 3.6 3.8
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司 Package Mechanical Data:TO-263C-3L Symbol Dim in mm Min Typ Max A 4.37 4.57 4.77 A1 0 0.25 A2 1.22 1.27 1.42 A3 2.49 2.69 2.89 b 0.7 0.81 0.96 b1 1.17 1.27 1.47 c 0.3 0.38 0.53 D 9.86 10.16 10.36 D1 8.4REF D2 7.073REF E 8.5 8.7 8.9 E1 1.07 1.27 1.47 e 2.54BSC L 17.7 15.1 15.5 L1 1.4 1.55 1.7 L2 2 2.3 2.6 H 6 6.5 6.85 Q 2.6 2.8 3 ϕ 3.4 3.6 3.8
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司 Attention 1,Any and all APM Microelectronics products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your APM Microelectronics representative nearest you before using any APM Microelectronics products described or contained herein in such applications. 2,APM Microelectronics assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all APM Microelectronics products described or contained herein. 3, Specifications of any and all APM Microelectronics products described or contained here instipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. 4, APM Microelectronics Semiconductor CO., LTD. strives to supply high quality high reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design,and structural design. 5,In the event that any or all APM Microelectronics products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. 6, No part of this publication may be reproduced or transmitted in any form or by any means,electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of APM Microelectronics Semiconductor CO., LTD. 7, Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. APM Microelectronics believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. 8, Any and all information described or contained herein are subject to change without notice due to product/technology improvement,etc. When designing equipment, refer to the "Delivery Specification" for the APM Microelectronics product that you Intend to use.
30V N-Channel Enhancement Mode MOSFET AP220N03P/T REV1.0 永源微電子科技有限公司 Copyright Attribution“APM-Microelectronice” Edition Date Change REV1.0 2024/6/21 Initial release