AX32X0 SEOUL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 22
Technical content
Features
Applications
사진 Acriche series is designed for AC source operation and high flux output applications. Acriche is a semi-permanent and environmental friendly semiconductor lighting that can be used in AC without additional device. Acriche's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Acriche is ideal light sources for general illumination Applications.
- Architectural lighting
- Task lighting
- Decorative / Pathway lighting
- Household appliances * The appearance and specifications of the product can be changed for improvement without notice.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Part number of AX32X0 1. Part Number form : A X1 X2 X3 X4 X5 Warm WhiteN Pure WhiteW ColorX1 A33 Acriche SeriesX2 Dome Type2 LENS TypeX3 Operating Voltage [V]X4 Emitter0 PCB TypeX5 2. Part Number of AX32X0 220V/230V [RMS] 100V/110V [RMS] Operating voltage 20mA [RMS]AW3220 / AN3220 40mA [RMS]AW3200 / AN3200 Operating current Part number
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Outline dimensions 2. AX3220 Electrode Electrode 1. AX3200 Electrode Electrode NC NC Notes : [1] All dimensions are in millimeters. (tolerance : ±0.2 ) [2] Scale : none [3] This drawing without tolerances are for reference only [4] Slug of package isn’t connected to anode or cathode [5] NC pin isn’t connected to electrode
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com lx-220-ФlIlluminance [3] W3.3PDPower Dissipation mA [RMS]-40-IoptOperating Current Hz50 / 60FreqOperating Frequency K-6300-CCTCorrelated Color Temperature [4] MaxTypMin 195 deg.1102Θ 1/2View Angle --RaCRI lm-ФV [2]Luminous Flux [1] Unit Value SymbolParameter 1. AW3200 1-1 Electro-Optical characteristics at 100V/110V Ta=25ºC ºC125TjJunction Temperature -±2,000V HBM-ESD Sensitivity ºC-40 ~ +120TstgStorage Temperature W6.4PDPower Dissipation ºC-30 ~ +85ToprOperating Temperature V [RMS]115/127vopt [5]Operating Voltage UnitValueSymbolParameter Characteristics of Acriche *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com lx-170-ФlIlluminance [3] W3.3PDPower Dissipation mA [RMS]-40-IoptOperating Current Hz50 / 60FreqOperating Frequency K-3000-CCTCorrelated Color Temperature [4] MaxTypMin 150 deg.1102Θ 1/2View Angle --RaCRI lm-ФV [2]Luminous Flux [1] Unit Value SymbolParameter ºC125TjJunction Temperature -±2,000V HBM-ESD Sensitivity ºC-40 ~ +120TstgStorage Temperature W6.4PDPower Dissipation ºC-30 ~ +85ToprOperating Temperature V [RMS]115/127vopt [5]Operating Voltage UnitValueSymbolParameter 2. AN3200 (CRI 70) 2-1 Electro-Optical characteristics at 100V/110V Ta=25ºC Characteristics of Acriche *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com lx-220-ФlIlluminance [3] W3.3PDPower Dissipation mA [RMS]-20-IoptOperating Current Hz50 / 60FreqOperating Frequency K-6300-CCTCorrelated Color Temperature [4] MaxTypMin 195 deg.1102Θ 1/2View Angle --RaCRI lm-ФV [2]Luminous Flux [1] Unit Value SymbolParameter ºC125TjJunction Temperature -±2,000V HBM-ESD Sensitivity ºC-40 ~ +120TstgStorage Temperature W6.4PDPower Dissipation ºC-30 ~ +85ToprOperating Temperature V [RMS]253/265vopt [5]Operating Voltage UnitValueSymbolParameter 3. AW3220 3-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Characteristics of Acriche *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com lx-170-ФlIlluminance [3] W3.3PDPower Dissipation mA [RMS]-20-IoptOperating Current Hz50 / 60FreqOperating Frequency K-3000-CCTCorrelated Color Temperature [4] MaxTypMin 150 deg.1102Θ 1/2View Angle --RaCRI lm-ФV [2]Luminous Flux [1] Unit Value SymbolParameter ºC125TjJunction Temperature -±2,000V HBM-ESD Sensitivity ºC-40 ~ +120TstgStorage Temperature W6.4PDPower Dissipation ºC-30 ~ +85ToprOperating Temperature V [RMS]253/265vopt [5]Operating Voltage UnitValueSymbolParameter 4. AN3220 (CRI 70) 4-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Characteristics of Acriche *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Color spectrum 1. Pure white 3 0 0 400 500 600 7 0 0 800 0. 0 0. 2 0. 4 0. 6 0. 8 1. 0 1. 2 P u re W h it e P h o to p ic s e n s it iv it y c u rv e Relative Spectral Power [a.u.] Wa v e le n g t h [ n m ] 2. Warm white 300 400 500 600 700 800 0. 0 0. 2 0. 4 0. 6 0. 8 1. 0 1. 2 W a rm w h ite ( C R I 70) Relative Spectral Power [a.u.] Wa v e le n g t h [ n m ]
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Current – Voltage characteristics 1. AX3200 with external resistor @100V 0 25 50 75 100 12 5 1 00V Current [RMS , mA] V olt ag e [R M S , V ] 2. AX3200 with external resistor @110V 02 5 50 75 100 125 110V Current [RMS , mA] Vo ltage [ R M S , V]
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Current – Voltage characteristics 0 50 100 15 0 200 25 0 Current [RMS , mA] V olt ag e [ R M S , V ] 220V 3. AX3220 with external resistor @220V 0 50 100 15 0 200 25 0 Current [RMS , mA] V olt ag e [ R M S , V ] 230V 4. AX3220 with external resistor @230V
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Voltage – Relative flux characteristics 80 85 90 95 100 105 110 115 12 0 0. 0 0. 5 1. 0 1. 5 2. 0 Relative Luminous Flux [a.u.] Vo ltage [R M S , V] 1 00V 1. AX3200 with external resistor @100V 90 95 10 0 105 110 115 120 125 13 0 0. 0 0. 5 1. 0 1. 5 2. 0 Relative Luminous Flux [a.u.] Vo ltage [RM S , V] 11 0V 2. AX3200 with external resistor @110V
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Voltage – Relative flux characteristics 3. AX3220 with external resistor @220V 180 190 20 0 210 220 230 24 0 250 260 0. 0 0. 5 1. 0 1. 5 2. 0 Relative Luminous Flux [a.u.] Vo ltage [ RM S , V] 220V 4. AX3220 with external resistor @230V 190 200 210 220 23 0 240 25 0 260 270 0. 0 0. 5 1. 0 1. 5 2. 0 23 0V Relative Luminous Flux [a.u.] Vo ltage [ RM S , V]
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Relative Flux – Junction temperature characteristics 1. AX32X0 30 40 50 60 70 80 90 100 110 12 0 0. 0 0. 2 0. 4 0. 6 0. 8 1. 0 pu re w hite wa rm wh ite (C RI 70) Relative Luminous Flux [a.u.] Junc tion T em peratur e, Tj [ o Typical dome type radiation pattern 1. AX32X0 -80 -60 -40 -20 0 0.0 0.2 0.4 0.6 0.8 1.0 Relative luminous flux Angle (deg.)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Acriche Binning structure graphical representation 1. AX32X0 0.24 0.28 0.32 0.36 0.40 0.44 0.48 SHB SHA SJB SJA SKB SLB SH1 SK1 SWA SX1 SYA SY0 SX0 SW0 SV0 SV1 SV2 SL0 SL1 SK0 SLA SJ1 SJ0 SKA SH0 CIE (y) CIE (x) Pure white Warm white Plankian locus *Notes : For more detail Acriche binning, see the Acriche Binning and Labeling document.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Operating instructions of AX32X0 1. Operating circuit AC voltage Resistor 2. Resistor sheet Driving current : 20mA [RMS]Driving current : 40mA [RMS] 2.45kΩ2kΩ500Ω275ΩA 2kΩ1.5kΩ--D 2.25kΩ1.8kΩ400Ω210ΩC 2.45kΩ2kΩ500Ω275ΩB Resistor valueResistor valueResistor valueResistor value 230V220V110V100V AX3220AX3200 VF Bin Notes : [1] Acriche must be used with resistance certainly. [2] AW3200/AN3200 may be driven at maximum rated current of 40mA [RMS], AW3220/AN3220 may be driven at maximum rated current of 20m [RMS]. [3] The tolerance of current is ±5% on each resistance rank. [4] When the resistance is used, Check the rated power of resistance. Apply the proper resistance The rated power = operating current² X resistance
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Operating instructions of AX32X0 3. Operating temperature 100 125 6 ~ 7 Value ℃Ts max ℃Tj max ℃/WRθjS UnitParameter R T TSB AT j R R R T T T T T S B A A AT j θjS θSB θBA θj Surface Temperature (Ts) 4. Thermal modeling T Notes : [1] Acriche must be used with proper heat management. [2] It is recommended that the temperature of board should be below 70 ℃. [3] For more information, refer to Z Power led Thermal Management Guide. (www.essc.co.kr/_HOMEPAGE/home_kor/product/spec/thermal.pdf)
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Operating instructions of AX32X0 5. Heat sink 556.2Size : 50 x 50 mm S : TB : mm, DH : 25 mm FH : mm N : Footprint: 745mm2 Power Dissipation:4W RθBA(ºC /W)TB(ºC)Specification & Size 1073.8Size : 44 x 44 mm S : 7mm TB : 4mm, DH : 22.mm FH : 18mm N : 7ea Footprint: 745mm2 Power Dissipation:4W RθBA(ºC /W)TB(ºC)Specification & Size Foot print Area Fin Base Thickness Heat Sink Depth
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Recommended solder pad 1. Solder pad 2. Solder paste pattern Solder paste - Paste thickness : 0.2 mm Note : 1. All dimensions are in millimeters (tolerance : ±0.2 ) 2. Scale none *The appearance and specifications of the product may be changed for improvement without notice.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Solder profile 1. Reflow solder conditions / profile Pre-heating 200 180 150 220 240 260 Rising 5 °C/sec Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (min) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Cooling -5 °C/sec Time [Hr] 2. Hand Solder conditions 2-1 Lead : Not more than 3 seconds @MAX280℃ 2-2 Slug : Use a thermal-adhesives * Caution [1] Reflow soldering should not be done more than one time. [2] Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. [3] Die slug is to be soldered. [4] When soldering, do not put stress on the LEDs during heating. [5] After soldering, do not warp the circuit board. [6] Recommend to use a convection type reflow machine with 7 ~ 8 zones.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Emitter Reel Packaging Note : 1. The number of loaded products in the reel is 250ea 2. All dimensions are in millimeters (tolerance : ±0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice.
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Note : 1. 6~10 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 a ZLED b c Outer Box Aluminum Viny l Bag ba c SEOUL SEMICONDUCT OR CO.,LTD PART : W42180- ** PO CODE : ## ZLED 350 350 370 SIZE(mm)TYPE QUANTITY : 250 Packaging Structure
Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 03 Rev. 03 May 2008May 2008 www.ZLED.com www.ZLED.com Precaution for use [1] Acriche series run on high voltage such as 110 V or 220 V. [2] Please don't touch the PCB surface, which has built-in terminals and chips, with your hands or metals, while Acriche series is running. [3] Please don't add or change wires,while Acriche series is running. Handling of silicone resin for LEDS [1] Acriche series is encapsulated by silicone resin for the highest flux efficiency. [2] Notes for handling of Silicone resin Acriche series. [3] Avoid touching silicone resin parts especially by sharp tools such as Pincette (Tweezers). [4] Avoid leaving fingerprints on silicone resin parts. [5] Dust sensitivity silicone resin need containers having cover for storage. [6] When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. [7] Please do not force over 3000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product. [8] Please do not recommend to cover the silicone resin of the Acriche series with other resin (epoxy, urethane, etc).