AMR5-05

AMR5 CHINFA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Ta min ... Ta max, Io nom

264 VAC90

Characteristics Conditions typ. max. unit Io nomRated input voltage VAC min. 100 240 Characteristics Conditions min. typ. max. unit Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom MΩ100 -40 o C+ 71 Derating (see derating curve) o % / C2.5o o Vi nom, from +61 C to +71 C Storage temperature Non operational + 85 o C-40 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Switching frequency Vi nom, Io nom KHz4535 Isolation voltage Input-Output 3000/4242 VAC / VDC 95Relative humidity Vi nom, Io nom Vi nom, Io min o Bellcore Issue 6 @40 C, GB % RH Temperature coefficient MTBF o % / C Hours Hours Hours Hours Hours ± 0.03 5V model 12V model 15V model 24V model 24LS model Altitude during operation m 566000 556000 564000 525000 527000 4850 + 5 VDC + 12 VDC + 15 VDC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 12000 mA 6000 mA 5000 mA 4200 mA 80% 86% 86% 89%

60 WATTS

72 WATTS

75 WATTS

100.8 WATTS

78% 83% 83% 86% + 24 VDC90~264 VAC 3800 mA 89%91.2 WATTSAMR5-24LS 86%

FEATURES

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT www.chinfa.com sales@chinfa.com 2011.01.28 AMR5 SERIES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT Single Output Models EFF. (typ.) EFF. (min.) MODEL LIST Dimension L91 x W90 x D57 mm Free air convectionCooling Pollution degree 2 INPUT SPECIFICATIONS GENERAL IND. CONT. EQ. UL 508 HR Class I, Div 2 HR UL 60950-1 EN 60950-1 a HR UL 1310 Absolute input max. range IEC 60068-2-13 Installation position Vertical ( other direction may derating using )

Vi : 115 / 230 VAC, Io nom Vi : 90 VAC, Io nom Input current Rated input current 1.15 / 0.62 1.35 / 0.72 A A A A 1.5 1.7 5V model 5V model 12V, 15V models 12V, 15V models 1.8 / 0.9 A A2.2 24V model 24V model Line frequency Vi nom, Io nom 63 Hz47 Inrush current AVi : 115 / 230 VAC , Io nom 30 / 60 Power dissipation W W Vi : 230 VAC, Io nom 15.65V model 12V model 12.9 W W W o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION sales@chinfa.comwww.chinfa.com 2011.01.28 Characteristics Conditions min. typ. max. unit Characteristics Conditions min. unit Vi nom, Io max typ. max. Minimum load Vi nom % Output voltage accuracy (Adjusted before shipment) Line regulation % Load regulation Io nom, Vi min ...Vi max Turn on time Rise time ms ms ms %± 1Vi nom, Io min ...Io nom Vi nom,

0.8 Io nom

Vi nom, Io nom Vi nom, Io nom 1500 150 500 Vi nom, Io nom with 3500 F CAPμ ms1000 AMR5 SERIES 15V model 24V model 24LS model + 1 ± 1 Hold up time 16/60 Vi = 115 / 230 VAC, Io nom Vi nom, Io nom with 3500 F CAPμ Fall time Transient recovery time ms ms Vi nom, Io nom Vi nom, 1~0.5 Io nom 150 Ripple & noise Power back immunity Capacitor load Vi nom, Io nom, BW = 20MHz Vi nom, Io nom Vi nom, Io nom mV50 3.5 19.2 3.5 19.2 5V model 12V model 15V model 24V model DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Vi nom, Io nomDC LOW indicator threshold after start up (Red LED) 4.5 10.8 VDC VDC VDC VDC 13.5 21.6 VDC VDC VDC VDC 5V model 5V model 12V model 12V model 15V model 15V model 24V model 24V model 5V model 12V model 15V model 24V model 24LS model ms ms Efficiency Vi nom, Io nom, Po / Pi Up to 89%, See model list and typ efficiency curve 13.5 5.5 16.5 24.2 5V, 12V models 15V, 24V models 12.5 12.2 11.9 Leakage current Input-Output mA0.25 Vi nom,Rated continuous loading 5V model 12V model 15V model 24V model 24LS model 12A @ 5VDC / 10.5A @ 5.5VDC 6A @ 12VDC / 5.1A @ 14VDC 5A @ 15VDC / 4.5A @ 16.5VDC 4.2A @ 24VDC / 3.6A @ 28VDC 3.8A @ 24VDC / 3.7A @ 24.2VDC VDC VDC VDC VDC 7.5 3500 4.5 10.8 13.5 21.6 OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS μ F

Characteristics Conditions min. typ. max. unit Rated over load protection 110 102 150 108 Vi nom Over voltage protection Vi nom, Io nom (Auto Recovery) 5, 12, 15 & 24V model 24LS model 5.75 6.5 VDC5V model

16.5 VDC

20 VDC

www.chinfa.com sales@chinfa.com 2011.01.28 AMR5 SERIES 91.00 [3.58] + + DC LO L N DC ON 1234 5 6 90. 00 [3.54] 91. 00 [3.58] 32.25 [1.27] 49.00 [1.93] 57.00 [2.24] 52.50 [2.07] 45. 00 [1.77] MECHANISM & PIN CONFIGURATIONmm [inch] o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION 91 x 90 x 57 mm (3.58 x 3.54 x 2.24 inches)Case size PlasticCase material Packing 0.44kg ; 40 / 19kg / 2.28CUFT 380gWeight CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove INSTALLATION Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm ) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends.o Use copper conductors only, 60/75 C 30 33 VDC24V model 24.5 25.5 VDC24LS model TUV UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (24LS model only) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance Shock resistance UL / cUL Input fuse T3.15A / 250VAC internal Internal surge voltage protection VaristorIEC 61000-4-5 meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) GENERAL TOLERANCE ±0.30[0.01] ±0.50[0.02] Output short circuit Fold forward Degree of protection IP20 CONTROL AND PROTECTION APPROVALS AND STANDARDS PHYSICAL CHARACTERISTICS

PIN NO. Designation Description OUTINOTHER 1 - Negative output terminal 2 - Negative output terminal 3 + Positive output terminal 4 + Positive output terminal

5 L Input terminals (phase conductor, no polarity at DC input)

6 N Input terminals (neutral conductor, no polarity at DC input)

Vout ADJ. DC LO Operation indicator LED Trimmer-potentiometer for Vout adjustment DC Low indicator LED TYP. CURRENT LIMITED CURVE Power out [ % ] Output Voltage [ % ] 100 100 110 120 130 140 150 160

230 Vac

115 Vac

o Temperature [ C ] 100 71-40 Power out [ % ] TYP. EFFICIENCY CURVE CIRCUIT SCHEMATIC sales@chinfa.comwww.chinfa.com 2011.01.28 AMR5 SERIES ‧Block diagram for AMR5 series Vo - Vo +L N Fuse Switching Device Line Filter Inrush Current Limiter and rectifier Rectifier Opto - Isolation Output Level Detection Reference & Error Amp. Vout ADJ. DC ON (Green LED) DC LO (Red LED) Opto - Isolation Over Voltage Detection PWM Controller

1 For AMR5-12/15/24/24LS 2 For AMR5-05

62.5 AMR5-24 AMR5-24 Power out [ % ] 10 10025 EFFICIENCY [ % ] 7550