DRA10-24

DRA10_11 CHINFA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

FEATURES

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT DRA10 SERIES ‧UL / cUL / TUV / CE ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT + 5 VDC + 12 VDC + 15 VDC Single Output Models 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 2000 mA 840 mA 670 mA 420 mA EFF. (typ.) 73% 75% 76% 76% EFF. (min.) 71% 73% 74% 74%

10 WATTS

Switching frequency Vi nom, Io nom KHz Characteristics Conditions min. typ. max. unit Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom MΩ100 -20 o C+ 71 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Storage temperature Non operational + 85 o C-25 95Relative humidity Vi nom, Io nom Vi nom, Io min o Bellcore Issue 6 @40 C, GB % RH20 Temperature coefficient MTBF Altitude during operation o % / C Hours Hours m ± 0.03 5V model 12V model 15V model 24V model Hours Hours Conditions min. typ. max. unit Isolation voltage Input-Output 3000 / 4242 VAC / VDC Input-FG VAC / VDC 132 Derating (see derating curve) o % / C2.5o o Vi nom, from +61 C to +71 C 801000 803000 805000 808000 www.chinfa.com sales@chinfa.com 2011.01.27 Dimension Spring terminal type L90 x W22.5 x D114 mm Free air convectionCooling Pollution degree 2 GENERAL IND. CONT. EQ. UL 508 HR Class I, Div 2 HR UL 60950-1 EN 60950-1 a HR UL 1310 4850IEC 60068-2-13

Characteristics Conditions min. unittyp. max. Vi nom, Io max % Minimum load Vi nom % Output voltage accuracy (Adjusted before shipment) Line regulation %Io nom, Vi min ...Vi max Vi nom,

0.8 Io nom

5V...15V models - 10Voltage trim range + 1 ± 1 + 15 Line frequency Vi nom, Io nom 63 Hz47 4.0 3.4 3.3 2.8 Inrush current Power dissipation Leakage current 10 / 18 A W W W W Vi : 115 / 230 VAC , Io nom Vi : 230 VAC, Io nom Input-Output Input-FG mA mA o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION sales@chinfa.comwww.chinfa.com 2011.01.27 Characteristics Conditions min. typ. max. unit Characteristics Conditions min. unittyp. max. Turn on time Rise time ms ms Vi nom, Io nom Vi nom, Io nom with 3500 F CAPμ Ripple & noise mV50Vi nom, Io nom, BW = 20MHz Fall time Transient recovery time ms ms Vi nom, Io nom Vi nom, 1~0.5 Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Vi nom, Io nom Capacitor load Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) Vi : 115 / 230 VAC, Io nom Vi : 90 VAC, Io nom Input current Rated input current 1000 1500 150 300 15V model 24V model 5V model 12V model 0.25 3.5 Load regulation % Vi nom, Io min ...Io nom ± 2 24V model - 10 + 20 Hold up time 25 / 100 msVi : 115 / 230 VAC , Io nom ms ms Vi nom, Io nom Vi nom, Io nom with 3500 F CAPμ 150 500 15V model 24V model 5V model 12V model 7.5 15V model 15V model 24V model 24V model 5V model 5V model 12V model 12V model Efficiency Vi nom, Io nom, Po / Pi Up to 76%, See model list and typ efficiency curve Internal surge voltage protection VaristorIEC 61000-4-5 Input fuse T2A / 250VAC internal Rated over load protection 110 145 %Vi nom (see typ current limited curve) Io nomRated input voltage VAC240100 DC in 375120 VDC Power back immunity Vi nom, Io nom 1 second mA mA Vi nomRated continuous loading 15V model 24V model 5V model 12V model 2 A @ 5Vdc / 1.7 A @ 5.75 Vdc 0.84 A @ 12Vdc / 0.72 A @ 13.8 Vdc 0.67 A @ 15Vdc / 0.58 A @ 17.25 Vdc 0.42 A @ 24Vdc / 0.34 A @ 28.8 Vdc OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS 3500 CONTROL AND PROTECTION VDC VDC VDC VDC 11.0 13.5 21.6 11.0 VDC VDC VDC VDC 3.5 9.0 VDC VDC VDC VDC 3.5 9.0 4.5 10.8 13.5 21.6 4.5 10.8 μ F Ta min ... Ta max, Io nom

www.chinfa.com sales@chinfa.com 2011.01.27 DRA10 SERIES 114.00 [4.49] V+V-DC Output LO ON Vout ADJ. 2 11 3 4 5 N 22.50 [0.89] 90.00 [3.60] L o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION PHYSICAL CHARACTERISTICS Over voltage protection Vi nom, Io nom (Auto Recovery) 125 145 % Characteristics Conditions min. typ. max. unit UL / cUL TUV UL 508 Listed UL 60950-1, UL 1310 Class 2 Power Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 CCC GB4943, GB9254, GB17625.1 Vibration resistance Shock resistance 90 x 22.5 x 114 mm (3.6 x 0.89 x nches)4.49 iCase size PlasticCase material Packing 0.21 kg ; 56 / 12.5 kg / 2.16 CUFT 120 gWeight Output short circuit Hiccup mode Degree of protection IP20 CONTROL AND PROTECTION APPROVALS AND STANDARDS MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Spring terminal: 2 AWG24-14 (0.2~2mm ) flexible / solid cable, 10 m/m stripping at cable end recommendso Use copper conductors only, 60 / 75 C meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) GENERAL TOLERANCE ±0.30[0.01] ±0.50[0.02]

‧Block diagram for DRA10 series Vo - Vo +L N Fuse Control Switching Device Line Filter Inrush Current Limiter and Rectifier Rectifier Current Detection Opto - Isolation Opto - Isolation Output Level Detection Reference & Error Amp. Over Voltage Detection Y Vout ADJ. DC ON (Green LED) DC LOW (Red LED) V +1 Positive output terminal Negative output terminal Ground this terminal to minimize high-frequency emissions Input terminals (neutral conductor, no polarity at DC input) Input terminals (phase conductor, no polarity at DC input) Operation indicator LED DC LOW indicator LED Trimmer-potentiometer for Vout adjustment OUTINOTHER V - N L ON LO Vout ADJ. PIN NO. Designation Description www.chinfa.com sales@chinfa.com 2011.01.27 DERATING CURVE o Temperature [ C ] 100 71-20 Power out [ % ] TYP. EFFICIENCY CURVE DRA10-24 Power out [ % ] 10 10025 EFFICIENCY [ % ] 7550 50 230 Vac

115 Vac

TYP. CURRENT LIMITED CURVE DRA10-24 Hiccup mode Output Voltage [ % ] 100 t Time v

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT DRA10 SERIES ‧UL / cUL / TUV / CE ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT + 5 VDC + 12 VDC + 15 VDC Single Output Models 90~264VAC 90~264 VAC 90~264 VAC 90~264 VAC 2000 mA 840 mA 670 mA 420 mA EFF. (typ.) 73% 75% 76% 76% EFF. (min.) 71% 73% 74% 74% Switching frequency Vi nom, Io nom KHz Characteristics Conditions min. typ. max. unit Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom MΩ100 -20 o C+ 71 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Storage temperature Non operational + 85 o C-25 95Relative humidity Vi nom, Io nom Vi nom, Io min o Bellcore Issue 6 @40 C, GB % RH20 Temperature coefficient MTBF Altitude during operation o % / C Hours Hours ± 0.03 5V model 12V model 15V model 24V model Hours Hours Conditions min. typ. max. unit Isolation voltage Input-Output VAC / VDC Input-FG VAC / VDC 132 Derating (see derating curve) o % / C2.5o o Vi nom, from +61 C to +71 C 801000 803000 805000 808000 www.chinfa.com sales@chinfa.com 2011.01.27 m Dimension Screw terminal type L90 x W22.5 x D114 mm Free air convectionCooling Pollution degree 2 GENERAL IND. CONT. EQ. UL 508 HR Class I, Div 2 HR UL 60950-1 EN 60950-1 a HR UL 1310 4850IEC 60068-2-13

Line frequency Vi nom, Io nom 63 Hz47 4.0 3.4 3.3 2.8 Inrush current Power dissipation Leakage current 10 / 18 A W W W W Vi : 115 / 230 VAC , Io nom Vi : 230 VAC, Io nom Input-Output Input-FG mA mA Characteristics Conditions min. typ. max. unit Vi : 115 / 230 VAC, Io nom Vi : 90 VAC, Io nom Input current Rated input current 300 15V model 24V model 5V model 12V model 0.25 3.5 Io nomRated input voltage VAC240100 DC in 375120 VDC mA mA Characteristics Conditions min. unittyp. max. Vi nom, Io max % Minimum load Vi nom % Output voltage accuracy (Adjusted before shipment) Line regulation %Io nom, Vi min ...Vi max Vi nom, 5V...15V models - 10Voltage trim range + 1 ± 1 + 15 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION sales@chinfa.comwww.chinfa.com 2011.01.27 Characteristics Conditions min. unittyp. max. DRA10 SERIES Turn on time ms ms Vi nom, Io nom Vi nom, Io nom with 3500 F CAPμ Ripple & noise mV50Vi nom, Io nom, BW = 20MHz Fall time Transient recovery time ms ms Vi nom, Io nom Vi nom, 1~0.5 Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Vi nom, Io nom Capacitor load Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) 1000 1500 150 Load regulation % Vi nom, Io min ...Io nom ± 2 24V model - 10 + 20 Hold up time msVi : 115 / 230 VAC , Io nom ms ms Vi nom, Io nom Vi nom, Io nom with 3500 F CAPμ 150 500 15V model 24V model 5V model 12V model 7.5 15V model 15V model 24V model 24V model 5V model 5V model 12V model 12V model Efficiency Vi nom, Io nom, Po / Pi Up to 76%, See model list and typ efficiency curve Internal surge voltage protection VaristorIEC 61000-4-5 Input fuse T2A / 250VAC internal Rated over load protection 110 145 %Vi nom (see typ current limited curve) Power back immunity Vi nom, Io nom 1 second Vi nomRated continuous loading 15V model 24V model 5V model 12V model 2 A @ 5Vdc / 1.7 A @ 5.75 Vdc 0.84 A @ 12Vdc / 0.72 A @ 13.8 Vdc 0.67 A @ 15Vdc / 0.58 A @ 17.25 Vdc 0.42 A @ 24Vdc / 0.34 A @ 28.8 Vdc OUTPUT SPECIFICATIONS 3500 CONTROL AND PROTECTION Rise time VDC VDC VDC VDC 11.0 13.5 21.6 11.0 VDC VDC VDC VDC 3.5 9.0 VDC VDC VDC VDC 3.5 9.0 4.5 10.8 13.5 21.6 4.5 10.8 μ F INPUT SPECIFICATIONS Ta min ... Ta max, Io nom

www.chinfa.com sales@chinfa.com 2011.01.27 DRA10 SERIES 114.00 [4.49] V+V-DC Output LO ON Vout ADJ. 2 11 3 4 5 N 22.50 [0.89] 90.00 [3.60] L MECHANISM & PIN CONFIGURATION mm [inch] o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION PHYSICAL CHARACTERISTICS Over voltage protection Vi nom, Io nom (Auto Recovery) 125 145 % Characteristics Conditions min. typ. max. unit UL / cUL TUV UL 508 Listed UL 60950-1, UL 1310 Class 2 Power Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 CCC GB4943, GB9254, GB17625.1 Vibration resistance Shock resistance 90 x 22.5 x 114 mm (3.6 x 0.89 x nches)4.49 iCase size PlasticCase material Packing 0.21 kg ; 56 / 12.5 kg / 2.16 CUFT 120 gWeight Output short circuit Hiccup mode Degree of protection IP20 CONTROL AND PROTECTION APPROVALS AND STANDARDS CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Screw terminal: 2 AWG26-12 (0.2~2.5mm ) flexible / solid cable, connector can withstand torque at maximum 5 pound-inches. 4~5 m/m stripping at cable end recommendso Use copper conductors only, 60 / 75 C meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) GENERAL TOLERANCE ±0.30[0.01] ±0.50[0.02]

Ground this terminal to minimize high-frequency emissions Input terminals (neutral conductor, no polarity at DC input) Input terminals (phase conductor, no polarity at DC input) Operation indicator LED DC LOW indicator LED Trimmer-potentiometer for Vout adjustment OUTINOTHER V - N L ON LO Vout ADJ. PIN NO. Designation Description ‧Block diagram for DRA10 series Vo - Vo +L N Fuse Control Switching Device Line Filter Inrush Current Limiter and Rectifier Rectifier Current Detection Opto - Isolation Opto - Isolation Output Level Detection Reference & Error Amp. Over Voltage Detection Y Vout ADJ. DC ON (Green LED) DC LOW (Red LED) www.chinfa.com sales@chinfa.com 2011.01.27 DERATING CURVE o Temperature [ C ] 100 71-20 Power out [ % ] TYP. EFFICIENCY CURVE DRA10-24A Power out [ % ] 10 10025 EFFICIENCY [ % ] 7550 50 230 Vac TYP. CURRENT LIMITED CURVE DRA10-24A Hiccup mode Output Voltage [ % ] 100 t Time v