AMR4 CHINFA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

+ 5 VDC + 12 VDC + 15 VDC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 7000 mA 4500 mA 4000 mA 2500 mA 80% 84% 85% 86%

35 WATTS

54 WATTS

60 WATTS

78% 82% 83% 84%

FEATURES

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT www.chinfa.com sales@chinfa.com 2011.01.28 AMR4 SERIES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT Single Output Models EFF. (typ.) EFF. (min.) MODEL LIST Ta min ... Ta max, Io nom 264 VAC90 VDC375120 AC in DC in Characteristics Conditions typ. max. unit Characteristics Conditions min. typ. max. unit Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom MΩ100 -40 o C+ 71 Derating (see derating curve) o % / C2.5o o Vi nom, from +56 C to +71 C Storage temperature Non operational + 85 o C-40 Io nomRated input voltage VAC min. o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Switching frequency Vi nom, Io nom KHz5545 Isolation voltage Input-Output 3000/4242 VAC / VDC 95Relative humidity Vi nom, Io nom Vi nom, Io min o Bellcore Issue 6 @40 C, GB % RH Temperature coefficient MTBF o % / C Hours Hours Hours Hours ± 0.03 5V model 12V model 15V model 24V model Altitude during operation m 100 240 Line frequency Vi nom, Io nom 63 Hz47 Inrush current AVi : 115 / 230 VAC , Io nom 30 / 60 595000 582000 582000 608000 4850 Dimension L91 x W71x D56.5 mm Free air convectionCooling Pollution degree 2 GENERAL INPUT SPECIFICATIONS Power dissipation WVi : 230 VAC, Io nom 8.85V model W12V model 10.2 Vi : 115 / 230 VAC, Io nom Vi : 90 VAC, Io nom Input current Rated input current 0.7 / 0.43 1.1 / 0.6 A A A A 1.0 1.5 5V model 5V model 12V, 15V, 24V models 12V, 15V, 24V models IND. CONT. EQ. UL 508 HR Class I, Div 2 HR UL 60950-1 EN 60950-1 a HR UL 1310 Absolute input max. range IEC 60068-2-13 Installation position Vertical ( other direction may derating using )

W W 15V model 24V model 9.9 Leakage current Input-Output mA0.25 Characteristics Conditions typ. max. unitmin. Power dissipation Vi : 230 VAC, Io nom sales@chinfa.comwww.chinfa.com 2011.01.28 AMR4 SERIES o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Characteristics Conditions min. unit Vi nom, Io max typ. max. Minimum load Vi nom % Output voltage accuracy (Adjusted before shipment) Line regulation % Load regulation Io nom, Vi min ...Vi max Turn on time Rise time ms ms ms %± 1Vi nom, Io min ...Io nom Vi nom,

0.8 Io nom

Vi nom, Io nom Vi nom, Io nom 1500 150 500 Vi nom, Io nom with 3500 F CAPμ ms1000 + 1 ± 1 Hold up time 16 / 60 Vi : 115 / 230 VAC, Io nom Vi nom, Io nom with 3500 F CAPμ Fall time Transient recovery time ms ms Vi nom, Io nom 150 Ripple & noise Power back immunity Capacitor load Vi nom, Io nom, BW = 20MHz Vi nom, Io nom Vi nom, Io nom mV50 3.5 19.2 3.5 19.2 5V model 12V model 15V model 24V model DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Vi nom, Io nomDC LOW indicator threshold after start up (Red LED) 4.5 10.8 VDC VDC VDC VDC 13.5 21.6 VDC VDC VDC VDC 5V model 5V model 12V model 12V model 15V model 15V model 24V model 24V model Characteristics Conditions min. typ. max. unit Input fuse T2A / 250VAC internal Internal surge voltage protection VaristorIEC 61000-4-5 Rated over load protection 110 150 %Vi nom (see typ current limited curve) Over voltage protection Vi nom, Io nom (Auto Recovery) Output short circuit Fold forward Degree of protection IP20 5V model 12V model 15V model 24V model ms ms 13.5 5.5 16.5 Vi nom, 1~0.5 Io nom 7.5 VDC VDC VDC VDC 4.5 10.8 13.5 21.6 5.75 6.5 16.5 VDC VDC VDC VDC 5V model 12V model 15V model 24V model 3500 5V, 12V models 15V, 24V models Efficiency Vi nom, Io nom, Po / Pi Up to 86%, See model list and typ efficiency curve Vi nom,Rated continuous loading 5V model 15V model 24V model 7A @ 5VDC / 6.3A @ 5.5VDC 12V model 4.5A @ 12VDC / 3.8A @ 14VDC 4A @ 15VDC / 3.6A @ 16.5VDC 2.5A @ 24VDC / 2.1A @ 28VDC CONTROL AND PROTECTION INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS μ F

91.00 [3.58] + + DC LO Vout ADJ. L N DC ON 1234 5 6 71.00 [2.80] MECHANISM & PIN CONFIGURATIONmm [inch] www.chinfa.com sales@chinfa.com 2011.01.28 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION PIN ASSIGNMENT AMR4 SERIES PIN NO. Designation Description OUTIN5 Positive output terminal Positive output terminal Negative output terminal N Input terminals (neutral conductor, no polarity at DC input) - Negative output terminal L Input terminals (phase conductor, no polarity at DC input) OTHER DC ON Vout ADJ. DC LO Operation indicator LED Trimmer-potentiometer for Vout adjustment DC Low indicator LED CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove INSTALLATION Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm ) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends.o Use copper conductors only, 60/75 C TUV UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance Shock resistance APPROVALS AND STANDARDS PHYSICAL CHARACTERISTICS 91 x 71 x 56.5 mm (3.58 x 2.8 x 2.22 inches)Case size PlasticCase material Packing 0.31kg ; 48 / 16kg / 2.28CUFT 250gWeight UL / cUL meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) GENERAL TOLERANCE ±0.30[0.01] ±0.50[0.02] 91. 00 [3.58] 32.45 [1.28] 49.85 [1.96] 56.50 [2.22] 51.50 [2.02] 45. 00 [1.77]

TYP. CURRENT LIMITED CURVE Power out [ % ] Output Voltage [ % ] 100 100 110 120 130 140 150 160

230 Vac

115 Vac

o Temperature [ C ] 100 71-40 Power out [ % ] 62.5 TYP. EFFICIENCY CURVE CIRCUIT SCHEMATIC sales@chinfa.comwww.chinfa.com 2011.01.28 AMR4 SERIES ‧Block diagram for AMR4 series Vo - Vo +L N Fuse Switching Device Line Filter Inrush Current Limiter and rectifier Rectifier Opto - Isolation Output Level Detection Reference & Error Amp. Vout ADJ. DC ON (Green LED) DC LO (Red LED) Opto - Isolation Over Voltage Detection PWM Controller AMR4-24 AMR4-24 Power out [ % ] 10 10025 EFFICIENCY [ % ] 7550