AMR3-24

AMR3 CHINFA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

+ 5 VDC + 12 VDC + 15 VDC 90~264 VAC 90~264 VAC 90~264 VAC 90~264 VAC 4500 mA 2750 mA 2400 mA 1500 mA 75% 83% 84% 84%

22.5 WATTS

33 WATTS

36 WATTS

72% 80% 81% 81% Ta min ... Ta max, Io nom 264 VAC90 VDC375120 AC in DC in Characteristics Conditions typ. max. unit Characteristics Conditions min. typ. max. unit Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom MΩ100 -40 o C+ 71 Derating (see derating curve) o % / C2.5o o Vi nom, from +56 C to +71 C Storage temperature Non operational + 85 o C-40 Io nomRated input voltage VAC min.

FEATURES

AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT www.chinfa.com sales@chinfa.com 2014.08.11 AMR3 SERIES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION ‧3 YEARS WARRANTY MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT Single Output Models EFF. (typ.) EFF. (min.) MODEL LIST o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION Switching frequency Vi nom, Io nom KHz6545 Isolation voltage Input-Output 3,000/4,242 VAC / VDC 95Relative humidity Vi nom, Io nom Vi nom, Io min o Bellcore Issue 6 @40 C, GB % RH Temperature coefficient MTBF o % / C Hours Hours Hours Hours ± 0.03 12V 15V 24V Altitude during operation m 100 240 Line frequency Vi nom, Io nom 63 Hz47 Inrush current AVi : 115 / 230 VAC , Io nom 25 / 50 757,000 716,000 724,000 748,000 4,850 Vi : 115 / 230 VAC, Io nom Vi : 90 VAC, Io nom Input current Rated input current mA mA mA mA 600 900 12V, 15V, 24V 12V, 15V, 24V Dimension L91 x W53 x D56.5 mm Free air convectionCooling Pollution degree 2 INPUT SPECIFICATIONS GENERAL Absolute input max. range IEC 60068-2-13 Installation position Vertical ( other direction may derating using ) IND. CONT. EQ. UL 508 HR UL 60950-1 EN 60950-1 a HR UL 1310 HR Class I, Div 2

W W W W Vi : 230 VAC, Io nom Input-Output mA o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION sales@chinfa.comwww.chinfa.com 2014.08.11 Characteristics Conditions min. typ. max. unit INPUT SPECIFICATIONS Characteristics Conditions min. unit Vi nom, Io max typ. max. Minimum load Vi nom % Output voltage accuracy (Adjusted before shipment) Line regulation % Load regulation Io nom, Vi min ...Vi max Turn on time Rise time ms ms ms %± 1Vi nom, Io min ...Io nom Vi nom,

0.8 Io nom

Vi nom, Io nom Vi nom, Io nom 1,500 150 500 Vi nom, Io nom with 3500 F CAPμ ms1,000 AMR3 SERIES 12V 15V 24V + 1 ± 1 Hold up time 20 / 100Vi : 115 / 230 VAC , Io nom Vi nom, Io nom with 3500 F CAPμ Fall time Transient recovery time ms ms Vi nom, Io nom 150 Ripple & noise Power back immunity Capacitor load Vi nom, Io nom, BW = 20MHz Vi nom, Io nom Vi nom, Io nom mV50 3.5 19.2 3.5 19.2 12V 15V 24V DC ON indicator threshold at start up (Green LED) Vi nom, Io nom Vi nom, Io nomDC LOW indicator threshold after start up (Red LED) 4.5 10.8 VDC VDC VDC VDC 13.5 21.6 VDC VDC VDC VDC 12V 12V 15V 15V 24V 24V Characteristics Conditions min. typ. max. unit Input fuse T2A / 250VAC internal Internal surge voltage protection VaristorIEC 61000-4-5 Rated over load protection 110 150 %Vi nom (see typ current limited curve) Over voltage protection Vi nom, Io nom (Auto Recovery) Output short circuit Fold forward Degree of protection IP20 12V 15V 24V ms Efficiency Vi nom, Io nom, Po / Pi Up to 84%, See model list and typ efficiency curve 13.5 5.5 16.5 Vi nom,Rated continuous loading 5V 12V 15V 24V 4.5A @ 5VDC / 4A @ 5.5VDC 2.75A @ 12VDC / 2.3A @ 14VDC 2.4A @ 15VDC / 2.1A @ 16.5VDC 1.5A @ 24VDC / 1.25A @ 28VDC Vi nom, 1~0.5 Io nom 7.5 VDC VDC VDC VDC 4.5 10.8 13.5 21.6 5.75 6.5 16.5 VDC VDC VDC VDC 12V 15V 24V 7.5 7.3 7.4 7.1 0.25 3,500 OUTPUT SPECIFICATIONS CONTROL AND PROTECTION μ F

MECHANISM & PIN CONFIGURATION mm [inch] www.chinfa.com sales@chinfa.com 2014.08.11 o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed SPECIFICATION TUV UL 508 Listed UL 60950-1, UL 1310 Class 2 Power Recognized ISA 12.12.01 (Class I, Division 2, Groups A, B, C and D) EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance Shock resistance APPROVALS AND STANDARDS PHYSICAL CHARACTERISTICS 91 x 53 x 56.5 mm (3.58 x 2.09 x 2.22 inches)Case size PlasticCase material Packing 0.25kg ; 64 / 17kg / 2.28CUFT 190gWeight PIN ASSIGNMENT AMR3 SERIES 91.00 [3.58] DC LO Vout ADJ. L N DC ON 1234 + + 5 6 53.00 [2.09] PIN NO. Designation Description 1, 2 3, 4 OUTIN5 + Positive output terminal N Input terminals (neutral conductor, no polarity at DC input) - Negative output terminal L Input terminals (phase conductor, no polarity at DC input) OTHER DC ON Vout ADJ. DC LO Operation indicator LED Trimmer-potentiometer for Vout adjustment DC Low indicator LED UL / cUL CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove INSTALLATION Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm ) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends.o Use copper conductors only, 60/75 C meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) GENERAL TOLERANCE ±0.30[0.01] 32.40 [1.28] 48.90 [1.93] 56.50 [2.22] 51.50 [2.02] 45.00 [1.77]

TYP. CURRENT LIMITED CURVE Power out [ % ] Output Voltage [ % ] 100 100 110 120 130 140 150 160

230 Vac

115 Vac

o Temperature [ C ] 100 71-40 Power out [ % ] 62.5 Power out [ % ] 10 10025 EFFICIENCY [ % ] 7550 TYP. EFFICIENCY CURVE CIRCUIT SCHEMATIC sales@chinfa.comwww.chinfa.com 2014.08.11 AMR3 SERIES ‧Block diagram for AMR3 series Vo - Vo +L N Fuse PWM Controller Switching Device Line Filter Inrush Current Limiter and rectifier Rectifier Opto - Isolation Output Level Detection Reference & Error Amp. Vout ADJ. DC ON (Green LED) DC LO (Red LED) Opto - Isolation Over Voltage Detection