AMB24-IP

AMB24-IP BELIMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Technical data sheet AMB24-IP www.belimo.us AMB24-IP • en-us • 2020-09-01 • Subject to change 1 / 5 Proportional, Non-Spring Return, 24 V, Cloud, BACnet/IP, Modbus TCP

• Cloud capable and communicative rotary actuator for ball valves
• Torque motor 180 in-lb [20 Nm]
• Nominal voltage AC/DC 24 V
• Control modulating, Cloud, communicative, Hybrid
• Conversion of sensor signals
• Ethernet 10/100 Mbit/s, TCP/IP, integrated web server
• Communication via BACnet IP, Modbus TCP and Cloud Technical Data Electrical Data Nominal voltage AC/DC 24 V Nominal voltage frequency 50/60 Hz Power consumption in operation 4 W Power consumption in rest position 3 W Power consumption for wire sizing 6 VA Transformer sizing 8 VA (class 2 power source) Connection supply / control cable 3 ft. [1 m], 6 x 0.5 mm² Parallel operation Yes (note the performance data) Electrical Connection 18 GA appliance cable, 1/2" conduit connector and RJ45 socket (ethernet) Overload Protection electronic throughout 0...95° rotation Functional Data Torque motor 180 in-lb [20 Nm] Communicative control Cloud BACnet IP Modbus TCP Operating range Y 2...10 V Control operating range Y note Hybrid via 2...10 V Operating range Y variable 0.5...10 V Position accuracy ±5% Direction of motion motor selectable with switch 0/1 Manual override external push button Angle of rotation note adjustable with mechanical stop Running Time (Motor) default 150 s, variable 70...220 s Running time motor variable 70...220 s Adaptation Setting Range manual Noise level, motor 45 dB(A) Position indication Mechanically, pluggable Safety Data Protection class IEC/EN III Safety Extra-Low Voltage (SELV) Degree of protection IEC/EN IP54

Technical data sheet AMB24-IP www.belimo.us AMB24-IP • en-us • 2020-09-01 • Subject to change 2 / 5 Degree of protection note IP54 when using protective cap or protective grommet for RJ45 socket Degree of protection NEMA/UL NEMA 1 Enclosure UL Enclosure Type 1 EMC CE according to 2014/30/EU Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001 Mode of operation Type 1 Rated impulse voltage supply / control 0.8 kV Ambient humidity max. 95% r.H., non-condensing Servicing maintenance-free Weight Weight 2.4 lb [2.4 kg] Materials Housing material UL94-5VA Safety notes

• The device must not be used outside the specified field of application, especially not in aircraft or in any other airborne means of transport.
• Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or aggressive gases interfere directly with the actuator and that is ensured that the ambient conditions remain at any time within the thresholds according to the data sheet.
• Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied during installation.
• The device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user.
• Cables must not be removed from the device.
• To calculate the torque required, the specifications supplied by the damper manufacturers concerning the cross-section, the design, the installation site and the ventilation conditions must be observed.
• The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed. Product features The actuator is controlled via the Cloud, BACnet IP or Modbus TCP and drives to the position defined by the control signal. Various data points can be written and read via the same interfaces. Hybrid mode: The actuator receives its analog control signal from the higher level controller and drives to the position defined. Using the Cloud, BACnet IP or Modbus TCP, various data points can be read and with the exception of the control signal written. Connection option for two sensors (passive sensor, active sensor or switching contact). The actuator serves as an analogue/digital converter for the transmission of the sensor signal to the higher level system. The configuration can be carried out through the integrated web server (RJ45 connection to the web browser), by communicative means or via the Cloud. Additional information regarding the integrated web server can be found in the separate documentation. Mode of operation Converter for sensors Communication

Technical data sheet AMB24-IP www.belimo.us AMB24-IP • en-us • 2020-09-01 • Subject to change 3 / 5 "Peer to Peer" connection http://belimo.local:8080 The Notebook must be set to "DHCP". Make sure that only one network connection is active. Standard IP address: Static IP address Password (read-only): User name: «guest» Password: «guest» This can be inverted in cases of control with an analogue positioning signal. The inversion causes the reversal of the standard behaviour, i.e. for control signal 0%, the actuator is opened to max and for control signal 100%, the actuator is closed. Simple direct mounting on the damper shaft with a universal shaft clamp, supplied with an anti-rotation device to prevent the actuator from rotating. The recorded data (integrated data recording for 13 months) can be used for analytical purposes. Download csv files via web browser. Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked). Adjustable angle of rotation with mechanical end stops. The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached. The first time the supply voltage is switched on, i.e. at the time of commissioning, the actuator carries out an adaption, which is when the operating range and position feedback adjust themselves to the mechanical setting range. The actuator then moves into the position defined by the positioning signal. An adaption can be triggered manually by pressing the "Adaption" button. Both mechanical end stops are detected during the adaption (entire setting range). The actuator then moves into the position defined by the positioning signal. Accessories Sähköiset lisävarusteet Kuvaus Tyyppi Feedback potentiometer 10 kΩ add-on, grey P10000A GR Feedback potentiometer 1 kΩ add-on, grey P1000A GR Feedback potentiometer 140 Ω add-on, grey P140A GR Feedback potentiometer 15 kΩ gray P15000A-F GR Feedback potentiometer 2.8 kΩ add-on, grey P2800A GR Feedback potentiometer 5 kΩ add-on, grey P5000A GR Feedback potentiometer 500 Ω add-on, grey P500A GR Auxiliary switch 1 x SPDT add-on S1A Auxiliary switch 2 x SPDT add-on S2A Positioner for wall mounting SGA24 Positioner for front-panel mounting SGF24 TF-CC US Connection cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socket ZK1-GEN Mekaaniset lisävarusteet Kuvaus Tyyppi Actuator arm for standard shaft clamp (one-sided) AH-25 Shaft extension 240 mm Ø20 mm for damper shaft Ø 8...22.7 mm AV8-25 K-AM25 Shaft clamp reversible, clamping range Ø10...20 mm K-SA Ball joint suitable for damper crank arm KH8 / KH10 KG10A Ball joint suitable for damper crank arm KH8 KG6 Ball joint suitable for damper crank arm KH8 KG8 Damper crank arm Slot width 8.2 mm, clamping range Ø14...25 mm KH10 Positioning signal inversion Simple direct mounting Data recording Manual override Adjustable angle of rotation High functional reliability Home position Adaptation and synchronisation

Technical data sheet AMB24-IP www.belimo.us AMB24-IP • en-us • 2020-09-01 • Subject to change 4 / 5 Damper crank arm Slot width 8.2 mm, for Ø1.05" KH12 Damper crank arm Slot width 6.2 mm, clamping range Ø10...18 mm KH6 Damper crank arm Slot width 8.2 mm, clamping range Ø10...18 mm KH8 SH10 SH8 TF-P TOOL-06 Adapter for auxiliary switch and feedback potentiometer Z-SPA ZG-100 ZG-101 ZG-109 ZG-110 ZG-112 ZG-DC1 ZG-DC2 ZG-JSA-1 ZG-JSA-2 ZG-JSA-3 Mounting kit for linkage operation for flat installation ZG-NMA ZG-SGF ZS-100 ZS-101 ZS-150 ZS-260 ZS-300 ZS-300-5 ZS-300-C1 ZS-300-C2 ZS-300-C3 Ohjemointityökalut, lisävarusteet Kuvaus Tyyppi Electrical installation Connection via safety isolating transformer. Parallel power connection of additional actuators is possible. Observe the transformer size and performance data. Wiring diagrams AC/DC 24 V Cable colors: 1 = black 2 = red 5 = orange 10 = yellow-black 11 = yellow-pink 12 = yellow-grey Connection of a notebook for parameterisation and manual control via RJ45. Optional connection via RJ45 (direct connection Notebook / connection via Intranet or Internet) for access to the integrated web server Functions The connection diagrams shows connections for the first sensor on terminal S1, while the second sensor can be connected identically on terminal S2. Parallel use of different sensor types is permitted. For hybrid operation, S1 is used for the control signal Y and must be configured as an active sensor.

Technical data sheet AMB24-IP www.belimo.us AMB24-IP • en-us • 2020-09-01 • Subject to change 5 / 5 Operating controls and indicators Dimensions Dimensional drawings