AGR19125E TRIQUINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
Typical 2 carrier, N-CDMA performance for V DD = 28 V, IDQ = 1250 mA, F1 = 1958.75 MHz, F2 = 1961.25 MHz, IS-95 (pilot, paging, sync, traffic channels 8—13) 1.2288 MHz channel bandwidth (BW). Adjacent channels measured over a 30 kHz BW at F1 – 0.885 MHz and F2 + 0.885 MHz. Intermodulation distortion products measured over a 1.2288 MHz BW at F1 – 2.5 MHz and F2 + 2.5 MHz. Peak/Average (P/A) = 9.72 dB at 0.01% probability on CCDF: — Output power: 24 W. — Power gain: 15 dB. — Efficiency: 24%. — ACPR: –48 dBc. — IMD3: –34 dBc. — Return loss: –10 dB. High-reliability, gold-metalization process. Low hot carrier injection (HCI) induced bias drift over 20 years. Internally matched. High gain, efficiency, and linearity. Integrated ESD protection. Device can withstand a 10:1 voltage standing wave ratio (VSWR) at 28 Vdc, 1960 MHz, 125 W contin- uous wave (CW) output power. Large signal impedance parameters available. Table 1. Thermal Characteristics Table 2. Absolute Maximum Ratings* Table 3. ESD Rating* JESD22-C101A (CDM) standards.
125 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power Transistor
Electrical Characteristics
Recommended operating conditions apply unless otherwise specified: TC = 30 °C. Table 4. dc Characteristics Table 5. RF Characteristics ψ No degradation in output power.
Figure 2. AGR19125E Test Circuit ? 1206 size chip capacitor: C3, C7: 22000 pF. ? Fair-Rite® ferrite bead: FB1 2743019447. per, 30 mil thickness, εr = 3.5.
Figure 3. Series Equivalent Input and Output Impedances
Figure 4. Output Power and Efficiency vs. Input Power DD = 28 V, F = 1960 MHz, CW MEASUREMENT. Figure 5. Power Gain vs. Output Power
VDD = 28 V, F = 1960 MHz, 100 kHz TONE SPACING. Figure 6. Two-Tone Gain vs. Output Power Figure 7. Two-Tone Broadband Performance
Figure 8. Two-Tone Intermodulation Products vs. Tone Spacing DQ = 1250 mA, POUT = 125 W (PEP), 100 kHz TONE SPACING. Figure 9. Two-Tone Intermodulation Distortion and Efficiency vs. Drain Supply
VDD = 28 V, F = 1960 MHz, 100 kHz TONE SPACING. Figure 10. Third Order Intermodulation Distortion vs. Output Power Figure 11. Intermodulation Distortion Products vs. Output Power
9 IS-95 CHANNELS/CARRIER, P/A RATIO = 9.72 dB AT 0.01% PROBABILITY . Figure 12. Two Carrier IS-95 CDMA Performance vs. Output Power 2.5 MHz SPACING, P/A RATIO = 9.72 dB AT 0.01%. Figure 13. Two Carrier CDMA (IS-95) Broadband Performance
PINS: 1. DRAIN 2. GATE 3. SOURCE PINS: 1. DRAIN 2. GATE 3. SOURCE PEAK DEVICES AGR19125EU XXXX 3 1 PEAK DEVICES AGR19125EF XXXX XXXX - 4 Digit Trace Code