AFG1000

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Arbitrary/Function Generator AFG1000 Series Datasheet The AFG1000 Series Arbitrary Function Generator provides a waveform generation tool with the best price performance ratio. It includes two models with dual channels, up to 60 MHz bandwidth and up to 10 Vp-p output amplitude. The four run modes, 50 built-in frequently-used waveforms and the built-in 200 MHz frequency counter cover most waveform generation needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut buttons, USB interface and PC software provide the most intuitive ways to configure the instrument. Key performance specifications Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or

30 MHz square waveforms

14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or

1 M points record length

Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads Key features Continuous, sweeping, burst, and modulation modes (AM, FM, PM, ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done 64-MByte internal non-volatile memory for arbitrary waveform storage Built-in 200 MHz counter with 6-digit resolution offers an easy and precise way of frequency/period/pulse width/duty cycle measurement Standard USB host/device for memory expansion and remote control Free ArbExpress makes user defined waveforms editing extremely easy through an external USB memory stick Compatible with TekSmartLab™ for easy teaching and learning Standard 5-year warranty

Applications

Electric and electronics experiments Communications experiments Sensor simulation Functional test Performance and features 1 μHz to 25 MHz or 60 MHz sine waveform range, with 12-digit or 1 μHz resolution and a ±1 ppm drift high stability time base, provides great signal fidelity in the frequency domain. With 1 mVp-p to 10 Vp-p output amplitude range, and 14-bit or 1 mVp-p resolution over the whole frequency range, there is no need to compromise between output amplitude and frequency any more. Four different run modes cover most use cases with a cost effective solution. 50 most-frequently used standard and arbitrary waveforms are built-in for easy access. Up to 1 M points arbitrary waveforms memory enables users to replicate real world signals captured with a Tektronix oscilloscope or defined with ArbExpress. The built-in 200 MHz and 6-digit resolution frequency counter is an easy and precise way to measure frequencies/periods/pulse widths/duty cycles. Ease of use The high-resolution 3.95-inch color TFT display shows relevant settings and parameters in both text and graphic formats, which give users full confidence in their settings, and let them focus on the task at hand. The front panel shortcut buttons and rotary knob make accesses to most frequently used functions and settings with minimum effort and time. The built-in 64-MByte non-volatile memory together with USB stick memory interface, provide unlimited space for user-defined waveform storage. Software and solutions The user-defined arbitrary waveforms generated by the free ArbExpress software can easily be loaded on the AFG1000 with a USB memory stick. As a building block of Tektronix educational solution, the AFG1000 can be embedded into TekSmartLab and enable a cost efficient and effective way of teaching, learning, and lab management. www.tek.com 1

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Channels Number of channels 2 Built-in waveforms Built-in waveforms Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms General characteristics Sine waves Range AFG1022 AFG1062 1 μHz to 25 MHz 1 μHz to 60 MHz Sine wave in burst mode 2 mHz to 25 MHz 2 mHz to 30 MHz Effective maximum frequency out

25 MHz 60 MHz

Amplitude flatness (1 Vp-p), typical <10 MHz ±0.4 dB ±0.5 dB ≥10 MHz and ≤25 MHz ±0.7 dB ≥10 MHz and ≤60 MHz ±0.9 dB Harmonic distortion (1 Vp-p) ≤10 MHz < -50 dBc < -60 dBc >10 MHz < -50 dBc < -47 dBc Total harmonic distortion < 0.2% (10 Hz to 20 kHz, 1 Vp-p) Spurious (1 Vp-p), typical < -45 dBc Phase noise, typical 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p Residual clock noise, typical -57 dBm Square wave Range AFG1022 AFG1062 1 μHz to 12.5 MHz 1 μHz to 30 MHz Rise/fall time, typical <12 ns <10 ns Jitter (rms), typical <1 ns <500 ps Overshoot <5% Datasheet 2 www.tek.com

1 μHz to 1 MHz 1 μHz to 2 MHz Linearity, typical ≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry Symmetry 0.0% to 100.0% Pulse wave Range AFG1022 AFG1062 1 μHz to 12.5 MHz 1 μHz to 30 MHz Pulse width range 40 ns to 999 ks 17 ns to 999 ks Pulse width resolution 1 ns or 4 digits Pulse duty <1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply) ≥1 MHz, 50% fixed ≥1 MHz, 50% fixed Edge transition time, typical <12 ns, fixed <10 ns, fixed Overshoot, typical <5% Jitter (rms), typical <1 ns <500 ps Noise Noise bandwidth (-3 dB) AFG1022 AFG1062

25 MHz 50 MHz

-5 V to +5 V, 50 Ω load -10 V to + 10 V, open circuit or high Z load Arbitrary waveform Range AFG1022 AFG1062 1 μHz to 10 MHz 1 μHz to 30 MHz Arbitrary waveform in burst mode 2 mHz to 10 MHz 2 mHz to 30 MHz Effective analog bandwidth (-3 dB)

30 MHz 60 MHz

Non-volatile memory 64 MByte Memory Length 2 to 8,192 2 to 1 M-point Sampling rate 125 MS/s 300 MS/s Vertical resolution 14 bits Rise and fall time < 10 ns < 8 ns Jitter (rms), typical < 6 ns AFG1000 Series Arbitrary Function Generator Datasheet General characteristics www.tek.com 3

1 μHz or 12 digits Internal reference stability ±1 ppm at 0 - 40 °C Internal reference aging ±1 ppm per year Amplitude Range (50 Ω load) ≤25 MHz AFG1022 AFG1062 1 mVp-p to 10 Vp-p 1 mVp-p to 10 Vp-p >25 MHz - 1 mV p-p to 5 V p-p Range (Open circuit or high Z load) ≤25 MHz 2 mVp-p to 20 Vp-p 2 mV p-p to 20 V p-p >25 MHz - 2 mV p-p to 10 V p-p Accuracy ±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset) Resolution 1 mVp-p, 1 mVrms or 4 digits Units Vp-p, Vrms Output impedance 50 Ω (typical) Local impedance setting Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance) Isolation No floating ground, signal ground connected to chassis ground Signal output protection Short-circuit tolerance, main output automatically disabled when over current DC offset Range ±(5 Vpk – Amplitudep-p/2), 50 Ω load ±(10 Vpk – Amplitudep-p/2), open circuit or high Z load Accuracy ±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p)) Resolution 1 mV or 4 digits Modulation Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes. Amplitude modulation Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms Sine, square, ramp, noise, arbitrary Internal AM frequency 2 mHz to 20 kHz Depth 0.0% to 100.0% Datasheet General characteristics 4 www.tek.com

Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms Sine, square, ramp, noise, arbitrary Internal modulating frequency 2 mHz to 20 kHz Frequency deviation (limited by carrier waveform type) AFG1022 AFG1062 2 mHz to 12.5 MHz 2 mHz to 30 MHz Phase modulation Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms Sine, square, ramp, noise, arbitrary Internal PM frequency 2 mHz to 20 kHz Phase Deviation 0° to 180° Amplitude shift keying (AFG1062 only) Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms 50% duty cycle square ASK rate 2 mHz to 100 kHz Frequency shift keying Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms 50% duty cycle square FSK rate 2 mHz to 100 kHz Phase shift keying (AFG1062 only) Carrier waveforms Sine, square, ramp, arbitrary, except DC and noise Source Internal / external Internal modulating waveforms 50% duty cycle square PSK rate 2 mHz to 100 kHz Pulse width modulation (AFG1062 only) Carrier waveforms Pulse, ≤1 MHz Source Internal / external Internal modulating waveforms Sine, square, ramp, arbitrary, except DC and noise PWM frequency 2 mHz to 20 kHz Deviation 0.0% to 50.0% of pulse period AFG1000 Series Arbitrary Function Generator Datasheet Modulation www.tek.com 5

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes. Carrier waveforms Sine, square, ramp, arbitrary (AFG1062 only) Minimum start-stop frequency 1 μHz Maximum start-stop frequency Sine AFG1022 AFG1062 Square 12.5 MHz 30 MHz Ramp 1 MHz 2 MHz Type Linear, logarithmic Direction Up / down Sweep time 1 ms to 500 s ± 0.1% Trigger sources Internal, external, or manual Burst Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022. The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes. Waveforms Sine, square, ramp, pulse, arbitrary except DC and noise Types AFG1022: count (1 to 50,000 cycles), infinite, gated AFG1062: count (1 to 1,000,000 cycles), infinite, gated Start phase -360° to +360° Trigger sources Internal, external, or manual Internal trigger interval (40 ns or (cycles x period) to 500 s) ± 1% Gate source External trigger Frequency counter Function Frequency, period, positive pulse width, duty cycle Frequency range 100 mHz to 200 MHz Frequency resolution 6 digits Coupling mode AC, DC Datasheet 6 www.tek.com

Voltage Range and Sensitivity, DC coupled (non-modulation signal) 100 mHz to 100 MHz 250 mVp-p to 5 Vp-p (AC + DC)

100 MHz to 200 MHz 450 mVp-p to 3 Vp-p (AC + DC)

Voltage range and sensitivity, AC coupled (non-modulation signal)

1 Hz to 100 MHz 250 mVp-p to 5 Vp-p

100 MHz to 200 MHz 450 mVp-p to 4 Vp-p

Pulse width and duty cycle measure

1 Hz to 10 MHz

Input impedance 1 M Ω in parallel with 100 pF High frequency noise restraint (HFR) On / Off (HFR frequency = 500 kHz) Sensitivity Low, middle, or high Trigger level range -2.5 V to +2.5 V Auxiliary inputs and outputs External modulation input Input frequency range DC to 20 kHz Input voltage range All except FSK: ±1 V full scale, FSK: 3.3 V logic level Input impedance 12 kΩ (typical) External trigger input Level TTL-compatible Slope Rising or falling (selectable) Pulse Width >100 ns External reference clock input (Shared with Frequency Counter Input) Impedance 400 Ω, AC coupled Requested Input voltage swing 100 mVp-p to 5 Vp-p Locking range 10 MHz ±9 kHz External reference clock output Frequency 10 MHz Impedance 50 Ω, DC coupled Amplitude 1.6 Vp-p into 50 Ω load Communication interface USB Host and device, USB TMC compliance AFG1000 Series Arbitrary Function Generator Datasheet Frequency counter www.tek.com 7

Display type 3.95-inch Display resolution 480 by 320 Display colors 65,536 Menu and online help languages Menu and online help languages English and Simplified Chinese Power source Supply 220-240 VAC, 100-120 VAC, 50/60 Hz, CATⅡ Consumption AFG1022: Less than 28 W AFG1062: Less than 35 W Fuse 110 V: 250 V, F1AL 220 V: 250 V, F0.5AL Warm-up time 30 minutes (typical) Physical characteristics Dimensions (W, H, D) 230 × 110 × 306 mm (9.0 × 4.4 × 12.1 in) Weight Net 3.4 kg (7.5 lbs) Shipping 4.7 kg (10.3 lbs) EMC environment and safety Temperature Working 0 ℃ to 40 ℃ (32 °F to 104 °F) Storage -20 ℃ to 60 ℃ (-4 °F to 144 °F) Relative humidity (non- condensing) Operating: ≤ 80%, +0 °C to +40 °C (+32 °F to +104 °F) Non-operating: 5% to 90%, < +40 °C (+104 °F) Non-operating: 5% to 80%, ≥ +40 °C (+104 °F) to ≤ +60 °C (+140 °F) Altitude Operating: up to 3,000 m (9843 ft.) Non-operating: up to 12,000 m (39,370 ft) Cooling method Fan cooling EMC compliance European Union EN 61326-1 Australia/NZ CISPR 11, Class A Datasheet 8 www.tek.com

CAN/CSA-C22.2 No. 61010-1 EN 61010-1 IEC 61010-1

Ordering information

AFG1022 Arbitrary Function Generator AFG1062 Arbitrary Function Generator Instrument options Power plug options Opt. A0 North America power plug (115 V, 60 Hz) Opt. A1 Universal Euro power plug (220 V, 50 Hz) Opt. A2 United Kingdom power plug (240 V, 50 Hz) Opt. A3 Australia power plug (240 V, 50 Hz) Opt. A5 Switzerland power plug (220 V, 50 Hz) Opt. A6 Japan power plug (100 V, 50/60 Hz) Opt. A10 China power plug (50 Hz) Opt. A11 India power plug (50 Hz) Opt. A12 Brazil power plug (60 Hz) Opt. A99 No power cord Service options Opt. C3 Calibration Service 3 Years Opt. C5 Calibration Service 5 Years Probes and accessories are not covered by the warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and calibration terms. AFG1000 Series Arbitrary Function Generator Datasheet EMC environment and safety www.tek.com 9

AFG1000 Arbitrary/Function Generator Safety and Compliance Instructions; printed document AFG1000 Documentation CD containing the following PDF documents: AFG1000 Arbitrary/Function Generators Quick Start User Manual, English AFG1000 Arbitrary/Function Generators Quick Start User Manual, Simplified Chinese AFG1000 Arbitrary/Function Generators Programmer Manual AFG1000 Arbitrary/Function Generators Specifications and Performance Verification Manual PDF documents not included on the AFG1000 Documentation CD but available for download from www.tek.com. AFG1000 Arbitrary/Function Generators Quick Start User Manual, Russian, (Tektronix part number 077-1135-xx) AFG1000 Arbitrary/Function Generators Quick Start User Manual, Japanese, (Tektronix part number 077-1166-xx) Packing list Power cord, specified by country Certificate of calibration; printed document USB cable x 1, Type A to Type B BNC cable x 2 Tektronix Supplemental Information Sheet For the Peoples Republic of China: China RoHs; printed document Fuse, cartridge; 5 x 20 mm, 0.5 A, 250 V, time-delay Fuse, cartridge; 5 x 20 mm, 1 A, 250 V, time-delay Warranty Five year warranty on parts and labor Recommended accessories 174-4401-xx, USB cable, type A to type B cable – three feet 174-5194-xx, USB cable, type A to type B cable – six feet 012-1732-xx, BNC cable assembly, 0 to 1 GHz, shielded – three feet 159-0568-xx, Fuse, cartridge; 5 x 20 mm, 0.5 A, 250 V, time-delay 159-0569-xx, Fuse, cartridge; 5 x 20 mm, 1 A, 250 V, time-delay Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments. Datasheet 10 www.tek.com

AFG1000 Series Arbitrary Function Generator Datasheet www.tek.com 11

ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 3086 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098 People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea +822 6917 5084, 822 6917 5080 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777 Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835* Taiwan 886 (2) 2656 6688 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.

25 Apr 2017 75W-60160-2

www.tek.com