DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 30

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

  • L arge generated force of 3,500 N/cm 2
  • Operating temperature range from −25°C to +85°C H igh-speed response: Driving up to about 1/3 of self- resonant frequency (in several ten kHz) L ow power consumption: Can be retained at the leakage current state of 100 μA or less V ery small size: 1/10 or smaller than conventional multilayer actuators
  • R oHS/REACH compliant Multilayer Piezoelectric Actuators AE Series Resin Coated Overview Multilayer piezoelectric actuators are ceramic elements used to convert electrical energy into mechanical energy such as displacement or force by utilizing the piezoelectric longitudinal effect. KEMET’s multilayer piezoelectric actuators are produced based on our unique element structure design and piezoelectric ceramic materials with high electrostrictive factors. Compared to conventional piezoelectric actuators, they are smaller in size but can generate higher displacements and forces at low voltages. The Resin Coated AE series actuators feature compact size and a wide variety of shapes for applications such as ultra- fine positioning mechanism and drive sources.

Applications

Typical applications include positioning, auto focusing of optical systems, pumps, mass-flow valves, vibration source, vibration controls, sensors, image stabilization of DSC, mirror/prism positioning, manipulators, motors and printers.

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated

Ordering Information

Section (mm) Nominal Displacement ( μm) Overall Length (mm) Coating Type Hole Environmental Compliance AE = Resin Coated Type 0505 = 5 mm X 5 mm (Coating area is not included) The last two digits specify the displacement values. Example: D44 μm Blank = Standard overall lengths of 5, 10 or 20 H09 = 9 H18 = 18 H40 = 40 D = Thin coating type Blank = No hole H0 = With hole F = RoHS/REACH Compliant (See "Environmental Compliance" below) Application Examples Application Examples Semiconductor manufacturing system Clamping actuator of wire bonding, actuator of shaker, actuator of damping system, positioning of light source Precision machinery, mechatronics Sewing machine, robot, vibration of parts feeder, positioning of equipment, pressure sensor Home appliances Actuator of pump Audio equipment Speaker Imaging equipment Actuator of resolution improvement, actuator of autofocusing, actuator of damping Computer, OA equipment Pressure sensor, positioning of memory device (data storage or others) Optical equipment Positioning of stage, actuator of autofocusing, actuator of shaker and damping system Communications Polarization control, wavelength control Medical equipment Micropump, ultrasonic transducer, manipulators Measuring instrument Pressure sensor, acceleration sensor, fine positioning Automotive Vibration Control

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Element Structure KEMET’s multilayer piezoelectric actuators are designed using unique element structure technology and proprietary ceramic materials with high electrostrictive factors. Insulator Internal electrode Direction of displacement External electrode Ceramic This particular structure and technology involved provide a unique product with below advantages compared to other similar solutions: Against electromagnetic actuators F aster response

  • Hi gher resolution for positioning
  • L arge generated force L ow power consumption N o electromagnetic noise Against bimorph piezoelectric actuators
  • 7 times the energy conversion efficiency of the bimorph type actuator L ower power consumption
  • L arge generated force S table displacement, reduced shift and creep phenomena 00 times the response speed of the bimorph piezoelectric actuator Against stacked piezoelectric actuators
  • Compact size (less than the specific volume of the stacked piezoelectric actuator) L ow drive voltage E asy to use Inexpensive

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm Outer dimensions in mm Overall length 10 and 20 mm Products Overall length 5, 9, 18 and 40 mm Products Note: Factory-shipped polarization: R ed lead wire = (+) W hite lead wire = (−) Above drawings do not include dimension of wire connection area and diameter of the wire. Please contact KEMET for details. Part Number Outer Dimensions (mm) H ±0.1 T1 ±0.1 W1 ±0.1 T2 Maximum W2 Maximum W3 Maximum AE0203D04DF 5 AE0203D08H09DF 9 AE0203D08DF 10 AE0203D18H18DF 18 AE0203D16DF 20 AE0203D44H40DF 40 AE0505D04D-H0F 5 AE0505D08D-H0F 10 AE0505D08H09DF 9 AE0505D08DF 10 AE0505D18H18DF 18 AE0505D16DF 20 AE0505D44H40DF 40 AE0707D08H09DF 9 AE0707D08DF 10 AE0707D18H18DF 18 AE0707D16DF 20 AE0707D44H40DF 40 AE1010D08H09DF 9 AE1010D16DF 20 AE1010D44H40DF 40

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. Wire dimensions in mm Note: Ød = Diameter of lead wire ØD = Outer diameter including the thickness of coating L = Lead wire length Lead wire : Copper wire with Tin plating Coating : PTFE (Polytetrafluoroethylene) Part Number Wire Dimensions AWG Ød ØD L UL Number AE0203D04DF 30 0.3 0.5 100 1993 AE0203D08H09DF AE0203D08DF AE0203D18H18DF AE0203D16DF AE0203D44H40DF AE035035D08H09DF AE035035D18H18DF AE0505D04D-H0F AE0505D08D-H0F AE0505D08H09DF AE0505D08DF AE0505D18H18DF 26 0.5 0.8AE0505D16DF AE0505D44H40DF AE0707D08H09DF 30 0.3 0.5AE0707D08DF AE0707D18H18DF 26 0.5 0.8AE0707D16DF AE0707D44H40DF AE1010D08H09DF 30 0.3 0.5 AE1010D18H18DF 26 0.5 0.8 AE1010D16DF AE1010D44H40DF AE1414D16DF AE2525D15DF

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE0203D04DF AE0203D08H09DF AE0203D08DF AE0203D18H18DF

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE0203D16DF AE0203D44H40DF AE035035D08H09DF AE035035D18H18DF

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE0505D04D-H0F AE0505D08D-H0F AE0505D08H09DF AE0505D08DF

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE0505D18H18DF AE0505D16DF AE0505D44H40DF AE0707D08H09DF

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE00707D08DF AE0707D18H18DF AE0707D16DF AE0707D44H40DF

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE1010D08H09DF AE1010D18H18DF AE1010D16DF AE1010D44H40DF

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Dimensions in mm cont. AE1414D16DF AE2525D15DF Performance Characteristics Item Performance Characteristics Conditions Operating Temperature Range −25 to +85°C When applied with a DC voltage at ambient temperature. When driven by an AC voltage at ambient temperature plus temperature rise due to heat generation. Recommended Storage Condition −5 to +40°C / less than 40% R.H. No condensation. Recommended storage to be at room temperature. Maximum Driving Voltage 150 VDC Displacement See Table 1 - Ratings & Part Number Reference At 150 VDC "Generated Force (Compression Resistance)" See Table 1 - Ratings & Part Number Reference The force required for restricting the displacement to zero when the maximum driving voltage is applied. Capacitance See Table 1 - Ratings & Part Number Reference f = 1 kHz, V = 1 Vrms (< 10 µF) f = 120 Hz, V = 1 Vrms (> 10 µF) Capacitance Tolerance ±20% Dissipation Factor 5% or less Insulation Resistance See Table 1 - Ratings & Part Number Reference Value obtained in one minute at 150 VDC. Resonance Frequency See Table 1 - Ratings & Part Number Reference Both ends of the element are in free state. Typical values of the element under our test conditions. Tensile Strength 1/10 of generated force Typical values of the element under our test conditions. Young's Modulus 4.4 X 1010 N/m2 Typical values of the element under our test conditions. Temperature Cycle Test Displacement: Initial value ±20% Capacitance: Initial value ±30% tan Less than initial rated value Insulation Resistance: MΩ or more Room temperature (3 minutes) At −25°C for minutes Room temperature (3 minutes) At +85°C for minutes Repetition of 10 cycles of the above

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Environmental Compliance All KEMET Multilayer Piezoelectric Actuators are RoHS and REACH Compliant. Article 33(1) of the REACH Regulation states that manufacturers and importers of articles (products) are required to notify their customers of the presence of any Substances of Very H igh Concern (SVHC) in their products exceeding 0.1% by weight a nd provide instructions on safe use of the product. KEMET Corporation reports regarding the Article 33(1) of REACH Regulation as follows: 1. Applicable Product: Multilayer piezoelectric actuators (AE, AER, ASB, ASL and AHB Series). 2. Report for content of REACH SVHC list: The product(s) above contain a substance by more than 0.1wt% per product weight that was published in the 8th update of th e REACH SVHC substances (December 19, 2012). 3. Regarding safety of the multilayer piezoelectric actuators (Piezoceramic products): The Piezoceramic that is used in this product becomes ceramic by sintering powder containing PZT as a main ingredient. It is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. Please note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics. 4. Technical product information on the multilayer piezoelectric actuators (Piezoceramic products): The manufacturing technique of the “piezoceramic products” whose main ingredient is Lead Titanium Zirconium Oxide (PZT) has been established, and there is no alternative material that can exhibit superior performance than PZT at this moment. Please note that the piezoceramic is listed as an exempt on RoHS (2011/65/EU) Annex III (7c.1). 5. Responsibility of piezoceramic manufacturers: Piezoceramic manufacturers report information regarding PZT containment in their products to the customers to obey the article 33 of the REACH regulation.

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Table 1 – Ratings & Part Number Reference Part Number Electrical Energy/ Power Physical Capacitance (µF) Resonance Frequency (kHz) Insulation Resistance (MΩ) Generated Force (N) Cross Section (mm) Overall Length (mm) Displacement (µm) at Maximum Voltage of 150 VDC Stiffness (N/µm) Weight (g) Custom Design Parts Customized parts are available on request. Please contact KEMET. Below guidelines can be used as reference regarding generated displacement and generated force. Item Characteristics Displacement Roughly proportional to the length of the element Generated Force Roughly proportional to the sectional area of the element Product Cross Section 1 x 1 mm square or larger Product Length 1 mm or longer Product Shape Available in cylindrical ring or other shapes

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0203D04DF AE0203D08H09DF AE0203D08DF

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0203D18H18DF AE0203D16DF AE0203D44H40DF

19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE035035D08H09DF AE035035D18H18DF AE0505D04D-H0F

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0505D08D-H0F AE0505D08H09DF AE0505D08DF

21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0505D18H18DF AE0505D16DF AE0505D44H40DF

22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0707D08H09DF AE00707D08DF AE0707D18H18DF

23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE0707D16DF AE0707D44H40DF AE1010D08H09DF

24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE1010D18H18DF AE1010D16DF AE1010D44H40DF

25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Electrical Characteristics cont. Voltage vs. Displacement Generated Force vs. Displacement Temperature vs. Displacement AE1414D16DF AE2525D15DF Packaging Part Type Packaging Type Pieces per Box AE0203 Bulk 10AE035035 AE0505 AE0707 4AE1010 AE1414 1AE2525

26© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Reliability The majority of failure modes on multilayer piezoelectric actuators are short-circuits due to degraded insulation. Although the cause of degradation of insulation has not been clarified, it has been found that the failure rate varies greatly between s tatic uses (DC voltage application) and dynamic uses (pulse voltage application). Like other electrical components, piezoelectric actuators can be affected by humidity as well as applied voltage and ambient temperature. This section describes reliability guidelines for static and dynamic usage of the resin coated type actuators. Reliability of our multilayer piezoelectric actuators is represented by MTTF (mean time to failure) in case of static usage. DC Voltage Application The acceleration factors have been obtained empirically for each of the drive voltage, ambient temperature and relative humidity based on many experimental results. The MTTFr in actual applications is estimated using equation (1) below with MTTFs observed under accelerated conditions as the reference value. 1) MTTFr = MTTFs × Av × Ah × At M TTFr : Estimated value M TTFs : Reference value (= 500 hours) Av: Acceleration factor for drive voltage = (150/Vr)3.2 Vr: Actual voltage (V) Ah: Acceleration factor for relative humidity = (90/Hr)4.9 Hr: Actual relative humidity (RH%) At: Acceleration factor for ambient temperature = 1.5(40 −Tr)/10 Tr: Actual ambient temperature (°C) T he following calculation is made for the case of use at 25°C, 60% RH and 100 M 24,500 hours (2.8 years) Pulse Voltage Application In driving dynamic applications, temperature rises as a result of self-heating allowing the component not to be affected by the humidity, thus extending the operational lifetime. This phenomenon is explained as a result of the humidity factor elimination caused by the self-heating. Since the self-heating value is affected by multiple factors such as the element’s shape, pulse waveform and frequency, it is difficult to estimate the actual rising value. Therefore, the life of the actuator cannot be determined by using an equation, u nlike the case of DC voltage applications. When testing the AE0203D08DF part, there was no failure confirmed after 500 h ours end of the pulse driving test. (500 Hz, 0 – 150 V rectangular pulse). Users should be careful about the influence of physical damage which can be caused by the fixing method of the element a nd/or the driving conditions.

27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated User’ s Guide Fixing Method C arefully prevent the piezoelectric actuators from being bent, twisted or applied tensile force. Reference: Twisting and Tension Tolerance Reference Value Remarks Twisting Force 3 × 10−1 N • m or less For an actuator which generates a force of 800 N (compression resistance). Tension 50 N or less

  • I nstall the actuator so that the center axis of the generated displacement is aligned with the center axis of the load. E poxy-based adhesives are recommended for bonding. Select adhesives that have high rigidity and allow for medium thickness so that the generation force and displacement cannot be deteriorated. Also, do not form adhesives on the side of the actuator. W hen thermosetting resin is used, perform polarizing treatment (see caution section) after the adhesive is settled. T he resin coated type is weak to the tensile force due to its structure and may be broken when tensile forces are applied onto the device. Using the device in the state that constantly applies compression is effective against any mechanical damage. The pressure applied to this element should be kept at 20% to 50% of the force generated by this element compression resistance). I nstall the element so that the axis of generated displacement is vertical to the mounting surface. Driving Method
  • Connect the red lead wire to the positive (+) terminal of the power supply. Also prevent reverse voltage application. I n driving applications, it is necessary to take consideration of hysteresis, ringing, creep, and other similar phenomenons. F or pulse driving, it is also necessary to be aware of self-heat generation, charge/discharge current, and the power supply’s impedance.

28© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated User’ s Guide cont. Generated Force and Load Relation Static load: No load value changes when actuator moves. Fluctuating load: Load value changes by spring reaction when actuator moves.

  • All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
  • Please request for a specification sheet for detailed product data prior to the purchase.
  • Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470MPAVOL08E1501H1
  • Connect the red lead wire to the positive （＋） terminal of the power supply.
  • Carefully avoid electric shock since a high voltage is in use.
  • Never apply excessive tension to a lead wire. Do not handle the product by picking up or moving the lead wire.
  • Do not disassemble the case of the metal sealed type.
  • Machining of the actuator element and replacement of the lead wire are prohibited.
  • Do not handle the resin-coated type （AE series） with bare hands. Otherwise, the reliability of the element would be degraded.
  • Do not wash resin-coated type （AE series） by organic solvant.
  • Avoid excessive physical shock resulting from, for example, dropping. Otherwise, the internal piezoelectric ceramic element may be damaged.
  • If the actuator is exposed to high temperature above 100 ℃ or if it is used after long storage period （more than three months ）, it should be polarized by using the circuit confi guration and conditions shown below. Precautions Protective resistor R1＝1kΩ Protective resistor R2＝1kΩ Polarizing conditions: DC voltage application 0V→150±0.2V (to be retained for 10 seconds) →0 R2PA S V
  • Do not apply voltage exceeding maximum rating voltage, or do not do rapid charging and discharging. These might lead to degradation of the reliability or mechanical fracture.
  • Do not use the actuator in high concentration of highly infl ammable gas. Otherwise, ignition may occur.
  • Use the actuator so as not to cause bending, twisting or tension. Furthermore, align the center axis of displacement of the actuator with the center axis of the mechanical load.
  • Drive the actuator so that the rising speed is more than three times as much as the resonance period in order to prevent the device from damaging by ringing.
  • Store the resin-coated type （AE series） preferably in a dry atmosphere （desirably below 40% RH） at ordinary temperatures （－5 to ＋40˚C）. Avoid condensation on the product surface.
  • Store actuators where there is no vibration.
  • These products must be handled properly as industrial waste. When disposing, please contact your local waste disposal service.
  • Piezo actuator is industrial wastes, make sure disposal method under the laws. 26 Multilayer Piezoelectric Actuators Vol.08

29© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated Handling Precautions Precautions to be taken when using multilayer piezoelectric actuators (Please read these precautions before using our products) Before using or designing a system using our products, read the precautions and specifications listed below. 2. The main failures with multilayer piezeoelectric actuators are deterioration of insulation resistance, short-circuit and open-circuit. Before using the products, systems should be designed carefully to ensure redundancy, prevention of the spread of fire, and prevention of faulty operation allowing occurrence of failures. 3. Use the products after checking the working conditions and rated performance of each multilayer piezoelectric actuator series. Selection of AE or AER Series (resin coated type) or ASB, ASL or AHB Series (metal sealed type) should be based on the intended working temperature and humidity.

  • Connect the red lead wire to the positive (+) terminal of the power supply. A void electric shocks since a high voltage is in use. N ever apply excessive tension to a lead wire. D o not handle the product by picking up or moving the lead wire. M achining of the actuator element and replacement of the lead wire are prohibited. D o not handle the resin coated type (AE series) with bare hands. D o not wash the resin coated type (AE series) with organic solvents. A void excessive physical shock. Otherwise, the internal piezoelectric ceramic element may be damaged.
  • If the actuator is exposed to high temperatures above 100°C or if used after long storage periods (more than three m onths), the device should be polarized by using the circuit configuration and conditions shown at right. D o not apply voltage exceeding maximum rating voltage, or rapid charging and discharging.
  • Do not use the actuator in high concentrations of highly inflammable gas. A lign the center axis of displacement of the actuator with the center axis of the mechanical load. W hen operated, the transient response time of the actuator should be less than 1/3 of the resonant frequency in order to prevent damage by ringing.
  • Store the resin coated type preferably in a dry atmosphere (desirably below 40% RH) at ordinary temperatures (-5°C to +40°C). Avoid condensation on the product’s surface. S tore actuators where there is no vibration. H andle products properly as industrial waste. When disposing, please contact your local waste disposal service and make sure the disposal methods meet all legal requirements.

30© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard P 0101_AE • 1/20/2021 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Multilayer Piezoelectric Actuators – AE Series Resin Coated KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation.