AD2C841 SOLIDSTATE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
Low On Resistance (70m TYP) High Continuous Load Current (2.5A MAX) Miniature 4DIP/SMD Package High Isolation Voltage (3750V RMS) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant 2 3 4(+) Input (-) Input (-/+) Load (+/-) Load AD2C841
© 2013 Solid State Optronics • San José, CA Page 2 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841
1 Form A
50V / 100mΩ MOSFET Output Solid State Relay Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage V F - 1.4 1.8 V I F = 10mA LED Reverse Voltage BV R 5 - - V I R = 10μA Input Reverse Current I R - - 10 A VR = 5V Turn-On Current I F - 2.5 5 mA VO = 20V, IO = 100mA (within 5mS) Output Specifications Blocking Voltage V B 50 - - V IO=1A Continuous Load Current I O - - 2.5 A I F=5mA On Resistance R ON - 70 100 mΩ IF=5mA, IO=2.5A Leakage Current I Oleak - 0.05 1 A IF=0mA, VO=50V Output Capacitance C OUT - 20 - pF V O=25V, f=1.0MHz Offset Voltage V OFFSET - - 0.2 mV I F=10mA Coupled Specifications Turn-On Time T ON - 2 5 mS IF=5mA, VO=10V, IO=2.5A Turn-Off Time T OFF - 0.05 0.5 mS IF=0mA, VO=10V, IO=2.5A Coupled Capacitance C COUPLED - 2 - pF Contact Transient Ratio - 2,000 7,000 0 V/S dV = 50V Isolation Specifications Isolation Voltage V ISO 3,750 - - V RMS RH ≤ 50%, t=1min Input-Output Resistance R I-O - 10 - VI-O = 500VDC Electrical Characteristics, TA = 25°C (unless otherwise specified)
© 2013 Solid State Optronics • San José, CA Page 3 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay AD2C841 Performance & Characteristics Plots, TA = 25°C (unless otherwise specified) IF=5mA IO=2.5A IF=5mA IO=2.5A
© 2013 Solid State Optronics • San José, CA Page 4 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay Process Step Description Parameter A Preheat Start Temperature (ºC) 150ºC B Preheat Finish Temperature (ºC) 180ºC C Preheat Time (s) 90 - 120s D Melting Temperature (ºC) 230ºC E Time above Melting Temperature (s) 30s F Peak Temperature, at Terminal (ºC) 260ºC G Dwell Time at Peak Temperature (s) 10s H Cool-down (ºC/s) <6ºC/s AD2C841 Solder Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Su rface temperature of device package should not exceed 250ºC: A B C D F E G H (2) Wave Solder: (3) Hand Solder: Maximum Temperature: 260ºC (at terminal) Maximum Time: 10s Pre-heating: 100 - 150ºC (30 - 90s) Single Occurrence Maximum Temperature: 350ºC (at tip of soldering iron) Maximum Time: 3s Single Occurrence Figure 1
© 2013 Solid State Optronics • San José, CA Page 5 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay All dimensions in millimeters with inches [“] in parenthesis ()
© 2013 Solid State Optronics • San José, CA Page 6 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay 4 PIN SMD Surface Mount Package (-S) Note: All dimensions in millimeters with inches [“] in parenthesis ()
© 2013 Solid State Optronics • San José, CA Page 7 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay
4 PIN SMD Tape & Reel (-STR) Note: All dimensions in millimeters
© 2013 Solid State Optronics • San José, CA Page 8 of 8 AD2C841/S/TR Rev 1.00 (03/07/2013) 001562 AD2C841 50V / 100mΩ MOSFET Output Solid State Relay Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. LIFE SUPPORT POLICY