AD2C111-L SOLIDSTATE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

1 Form A

The AD2C111-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of IR LED optically coupled to a IC that drives two rugged source-to-source enhancement type DMOS transistors. The 4 pin DIP package offers the combination of reduced package size, with 5kV input to output isolation. This device also includes over-current circuitry that protects the device from high load currents and transient spikes by limiting the amount of current that can pass through its output.

DESCRIPTION

OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* APPROVALS Small 4 pin DIP package outline - reduces board space• Current Limiting - protects device from overcurrents• High input-output isolation (5kV)• Low input control power consumption (2.5mA TYP)• 120mA maximum continuous load current• 40 ohms maximum on-resistance• Long life/high reliability• Reed relay replacement• Meter reading systems• Medical equipment• Battery monitoring• Multiplexers• VDE 0884 compliance (.04" / 10.16mm lead spacing)• -V Surface mount leadform option (65pcs per tube)• -S Tape & Reel Option (2,000 pcs / reel)• -TR NOTE: Suffixes listed above are not included in marking on device for part number identification. PARAMETER UNIT MIN TYP MAX Storage Temperature °C -40 150 Operating Temperature °C -40 85 Continuous Forward Current mA 50 Peak Forward Current A 1 Reverse Voltage V 5 Output Power Dissipation mW 500 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. IC + Input - Input Load Load UL / C-UL Approved: File E90096• Page 1 of 5 AD2C111-L rev 1.40 (03/31/2008) © 2008 Solid State Optronics • San José, CA with Current Limiting

ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V 1.2 1.5 If = 10mA LED Reverse Voltage V 61 2 Ir = 10uA Turn-On Current m 2.5 5 Io = 120mAA Turn-Off Current m 0.5A OUTPUT SPECIFICATIONS Blocking Voltage V 400 Io = 1uA Continuous Load Current m 120 If = 5mAA Current Limit m 150 180 If = 5mAA On-Resistance Ω 30 40 Io = 120mA Leakage Current µ 0.2 1 Vo = 400VA Output Capacitance p 25 50 Vo = 25V, f = 1.0MHzA Offset Voltage m 0.2 If = 5mAV COUPLED SPECIFICATIONS Isolation Voltage V 5000 T = 1 minute Turn-On Time m 1.25 3 If = 5mA, Io = 120mAs Turn-Off Time m 0.1 0.5 If = 0, Io = 120mAs Coupled Capacitance p 3F Contact Transient Ratio V 2000 7000 dV = 50V/µ s Page 2 of 5 AD2C111-L rev 1.40 (03/31/2008) © 2008 Solid State Optronics • San José, CA with Current Limiting

Turn-Off Time (ms) Device Count AD2C111-L Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 24 25 26 27 28 29 30 31 On-Resistance (ohms) Device Count AD2C111-L Leakage Current (uA) Device Count Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C AD2C111-L Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 400 420 440 460 480 500 520 Blocking Voltage (V) Device Count AD2C111-L 100 150 -40 -20 0 20 40 60 80 Temperature (C) Load Current (mA) Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C AD2C111-L Maximum Load Current vs. Temperature Turn-On Time (ms) Device Count AD2C111-L Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Page 3 of 5 AD2C111-L rev 1.40 (03/31/2008) © 2008 Solid State Optronics • San José, CA with Current Limiting

4 PIN DUAL IN-LINE PACKAGE 4 PIN SURFACE MOUNT DEVICE

rev 1.40 (03/31/2008) © 2008 Solid State Optronics • San José, CA with Current Limiting

Solid State Optronics (SSO) makes no warranties or representations wi th regards to the completeness and accuracy of this docume nt. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither ci rcuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we mak e no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to p ersonal injury or death. Users of SSO devices in life suppor t applications assume all risks of such use and agree to indemnify SSO against any an d all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perf orm when used properly in accordance with instructions for u se can be reasonably expected to result in significant injury to the user, or (d) a crit ical component in any component of a life support device or system whose failure can be reasonably expected to c ause failure of the life support device or sys tem, or to affect its safety or effe ctiveness. Page 5 of 5 AD2C111-L rev 1.40 (03/31/2008) © 2008 Solid State Optronics • San José, CA with Current Limiting