A8406 HAMAMATSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Various types of cables for frame grabber A8406 series A flat panel sensor adopting parallel video output requires a frame grabber cable for transmitting the digital video data to a frame grabber card installed in PC. Frame grabber cables A8406 series are cables that connect the flat panel sensor to a frame grabber. A8406 series have high performance and high reliability as digital video cables, and they are also designed for EMC conformity. The wires are covered by double shielding and they have ferrite cores. Refer to the datasheet for the flat panel sensor and choose a suitable cable for it. I Selection guide/G20 Frame grabber Cable type No. Cable length Cable end A8406-31 5 m A8406-36 7 m A8406-37 10 m A8406-38 12 m TX20A-36PH1-D2P1-D1E *2 A8406-41 5 m A8406-46 7 m A8406-47 10 m A8406-48 12 m PCS-E80FA *3 A8406-51 5 m A8406-56 7 m A8406-57 10 m General-purpose A8406-58 12 m 10140-6000EL *4 open A8406-32 5 m A8406-33 7 m A8406-34 10 m A8406-35 12 m TX20A-36PH1-D2P1-D1E *2 A8406-42 5 m A8406-43 7 m A8406-44 10 m A8406-45 12 m PCS-E80FA *3 A8406-52 5 m A8406-53 7 m A8406-54 10 m A8406-55 12 m 10140-6000EL *4 A8406-62 5 m IMAQ PCI-1424 *1 IMAQ PCI-1422 *1 A8406-64 10 m PCS-XE68MA+ *3 PCS-XE100MA+ *3 *1: Made by NI (National Instrument Corporation) *2: Made by JAE (Japan Aviation Electronics Industry, Limited) *3: Made by Honda Tsushin Kogyo Co. Ltd. *4: Made by 3M Co. Ltd. /G20
Frame grabber cables A8406 series A8406-31/-36/-37/-38 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 36-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. Cable for general frame grabber A8406-31/-36/-37/-38 I Cable color coding and specifications Pin No. Signal Cable color Marking color Pin No. Signal Cable color Marking color
1 Data12+ (MSB) Blue - 19 Data12- (MSB) Orange -
2 Data11+ Green - 20 Data11- Brown -
3 Data10+ Gray - 21 Data10- Red -
4 Data9+ Black - 22 Data9- Yellow -
5 Data8+ Pink - 23 Data8- Purple -
6 Data7+ White - 24 Data7- Blue Red (1)
7 Data6+ Orange White (1) 25 Data6- Green White (1)
8 Data5+ Brown White (1) 26 Data5- Gray White (1)
9 Data4+ Red White (1) 27 Data4- Black White (1)
10 Data3+ Yellow Black (1) 28 Data3- Pink Black (1)
11 Data2+ Purple White (1) 29 Data2- White Blue (1)
12 Data1+ (LSB) Blue Red (2) 30 Data1- (LSB) Orange White (2)
13 Reserved * 5 Green White (2) 31 GND Brown White (2)
14 Reserved *5 Gray White (2) 32 GND Red White (2)
15 ExtTrgGrb (TTL) Black White (2) 33 IntExt (TTL) Yellow Black (2)
16 Vsync+ Pink Black (2) 34 Vsync- Purple White (2)
17 Hsync+ White Blue (2) 35 Hsync- Blue Black (1)
18 Pclk+ Orange Black (1) 36 Pclk- Green Black (1)
Note) Numbers in parentheses of “Marking color” item show marking number. *5: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. I Dimensional outline (unit: mm) 18 36 11 9 a 36-PIN CABLE FERRITE CORE TX20A-36PH1-D2P1-D1ECable type No. A8406-31 a 5000 ± 140 A8406-36 7000 ± 140 A8406-37 10000 ± 200 A8406-38 12000 ± 200 KACCA0096EC
Frame grabber cables A8406 series A8406-41/-46/-47/-48 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 80-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. Cable for general frame grabber A8406-41/-46/-47/-48 I Cable color coding and specifications Pin No. Signal Cable color Marking color Pin No. Signal Cable color Marking color
1 A_Data1+ (LSB) Blue - 41 B_Data1+ (LSB) Pink Red (1)
2 A_Data1- (LSB) Orange - 42 B_Data1- (LSB) Purple Black (1)
3 A_Data2+ Green - 43 B_Data2+ Whi te Black (1)
4 A_Data2- Brown - 44 B_Data2- Blue Black (2)
5 A_Data3+ Gray - 45 B_Data3+ Orange Black (2)
6 A_Data3- Red - 46 B_Data3- Green Black (2)
7 A_Data4+ Black - 47 B_Data4+ Brown Black (2)
8 A_Data4- Yellow - 48 B_Data4- Gray Black (2)
9 A_Data5+ Pink - 49 B_Data5+ Red Black (2)
10 A_Data5- Purple - 50 B_Data5- Yellow Red (2)
11 A_Data6+ Whi te - 51 B_Data6+ Pink Red (2)
12 A_Data6- Blue Red (1) 52 B_Data6- Purple Yellow (2)
13 A_Data7+ Orange Whi te (1) 53 B_Data7+ Whi te Yellow (1)
14 A_Data7- Green Whi te (1) 54 B_Data7- Blue Yellow (1)
15 A_Data8+ Blown Whi te (1) 55 B_Data8+ Orange Yellow (1)
16 A_Data8- Gray Whi te (1) 56 B_Data8- Green Yellow (1)
17 A_Data9+ Red Whi te (1) 57 B_Data9+ Brown Yellow (1)
18 A_Data9- Black Whi te (1) 58 B_Data9- Gray Yellow (1)
19 A_Data10+ Yellow Black (1) 59 B_Data10+ Red Yellow (1)
20 A_Data10- Pink Black (1) 60 B_Data10- Yellow Blue (1)
21 A_Data11+ Purple Whi te (1) 61 B_Data11+ Pink Yellow (1)
22 A_Data11- Whi te Blue (1) 62 B_Data11- Purple Yellow (1)
23 A_Data12+ * 6 Blue Red (2) 63 B_Data12+ * 6 Whi te Yellow (2)
24 A_Data12- * 6 Orange Whi te (2) 64 B_Data12- * 6 Blue Orange (1)
25 A_Data13+ Green Whi te (2) 65 B_Data13+ Orange Yellow (2)
26 A_Data13- Brown Whi te (2) 66 B_Data13- Green Yellow (2)
27 A_Data14+ * 7 Gray Whi te (2) 67 B_Data14+ * 7 Brown Yellow (2)
28 A_Data14- * 7 Red Whi te (2) 68 B_Data14- * 7 Gray Yellow (2)
29 Reserved Black Whi te (2) 69 Reserved Red Orange (1)
30 Reserved Yellow Black (2) 70 Reserved Yellow Blue (2)
31 Reserved Pink Black (2) 71 Reserved Pink Yellow (2)
32 Reserved Purple Whi te (2) 72 Reserved Purple Blue (2)
33 IntExt (TTL) Whi te Blue (2) 73 ExtTrgGrb (TTL) Whi te Orange (1)
34 Reserved Blue Black (1) 74 Reserved Blue Orange (2)
35 Vsync+ Orange Black (1) 75 Reserved * 8 Green Orange (1)
36 Vsync- Green Black (1) 76 Reserved Brown Orange (1)
37 Hsync+ Brown Black (1) 77 Reserved * 8 Gray Orange (1)
38 Hsync- Gray Black (1) 78 Reserved Red Orange (2)
39 Pclk+ Red Black (1) 79 GND Pink Orange (1)
40 Pclk- Yellow Red (1) 80 GND Purple Orange (1)
Note) Numbers in parentheses of “Marking color ” item show marking number. *6: MSB for 12 bit *7: MSB for 14bit *8: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. I Dimensional outline (unit: mm) KACCA0138EB 14 1 40 80 a 80-PIN CABLE PCS-E80FA PCS-E80LKPACable type No. A8406-41 a 5000 ± 140 A8406-46 7000 ± 140 A8406-47 10000 ± 200 A8406-48 12000 ± 200 FERRITE CORE
Frame grabber cables A8406 series A8406-51/-56/-57/-58 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 40-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. Cable for general frame grabber A8406-51/-56/-57/-58 20 40 12 1 a 40-PIN CABLE FERRITE CORE 10140-60000EL 10140-A200-00 Cable type No. A8406-51 a 5000 ± 140 A8406-56 7000 ± 140 A8406-57 10000 ± 200 A8406-58 12000 ± 200 I Cable color coding and specifications Pin No. Signal Cable color Marking color Pin No. Signal Cable color Marking color
1 Data1+ (LSB) Blue - 21 Data1- (LSB) Orange -
2 Data2+ Green - 22 Data2- Brown -
3 Data3+ Gray - 23 Data3- Red -
4 Data4+ Black - 24 Data4- Yellow -
5 Data5+ Pink - 25 Data5- Purple -
6 Data6+ White - 26 Data6- Blue Red (1)
7 Data7+ Orange White (1) 27 Data7- Green White (1)
8 Data8+ Brown White (1) 28 Data8- Gray White (1)
9 Data9+ Red White (1) 29 Data9- Black White (1)
10 Data10+ Yellow Black (1) 30 Data10- Pink Black (1)
11 Data11+ Purple White (1) 31 Data11- White Blue (1)
12 Data12+ *9 Blue Red (2) 32 Data12- *9 Orange White (2)
13 Data13+ Brown Black (1) 33 Data13- Gray Black (1)
14 Data14+ *10 Red Black (1) 34 Data14- *10 Yellow Red (1)
15 Reserved * 11 Green White (2) 35 GND Brown White (2)
16 Reserved *11 Gray White (2) 36 GND Red White (2)
17 ExtTrgGrb (TTL) Black White (2) 37 IntExt (TTL) Yellow Black (2)
18 Vsync+ Pink Black (2) 38 Vsync- Purple White (2)
19 Hsync+ White Blue (2) 39 Hsync- Blue Black (1)
20 Pclk+ Orange Black (1) 40 Pclk- Green Black (1)
Note) Numbers in parentheses of “Marking color” item show marking number. Unless otherwise is not described, signal level is LVDS *9: MSB for 12 bit *10: MSB for 14 bit *11: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. I Dimensional outline (unit: mm) KACCA0174EA
Frame grabber cables A8406 series A8406-32/-33/-34/-35 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 36-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and PCI-1422. Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber A8406-32/-33/-34/-35 100 PCS-XE100MA+ PCS-XEM100LU2 36-PIN CABLE TX20A-36PH1-D2P1-D1E a Cable type No. A8406-32 a 5000 ± 140 A8406-33 7000 ± 140 A8406-34 10000 ± 200 A8406-35 12000 ± 200 FERRITE CORE I Pin connection for A8406-32 TX20A-36PH1-D2P1-D1E Pin No. Signal PCS-XE100MA+ Pin No. TX20A-36PH1-D2P1-D1E Pin No. Signal PCS-XE100MA+ Pin No.
1 Data12+ (MSB) 23 19 Data12- (MSB) 24
2 Data11+ 21 20 Data11- 22
3 Data10+ 19 21 Data10- 20
4 Data9+ 17 22 Data9- 18
5 Data8+ 15 23 Data8- 16
6 Data7+ 13 24 Data7- 14
7 Data6+ 11 25 Data6- 12
8 Data5+ 9 26 Data5- 10
9 Data4+ 7 27 Data4- 8
10 Data3+ 5 28 Data3- 6
11 Data2+ 3 29 Data2- 4
12 Data1+ (LSB) 1 30 Data1- (LSB) 2
13 Reserved * 12 33 31 GND 99
14 Reserved *12 35 32 GND 100
15 ExtTrgGrb (TTL) 37 33 IntExt (TTL) 39
16 Vsync+ 41 34 Vsync- 42
17 Hsync+ 43 35 Hsync- 44
18 Pclk+ 49 36 Pclk- 50
*12: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor. I Dimensional outline (unit: mm) KACCA0097EC
Frame grabber cables A8406 series A8406-42/-43/-44/-45 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber A8406-42/-43/-44/-45 I Pin connection for A8406-42 PCS-E80FA Pin No. Signal PCS-XE100MA+ Pin No. PCS-E80FA Pin No. Signal PCS-XE100MA+ Pin No.
1 A_Data1+ (LSB) 1 41 B_Data1+ (LSB) 51
2 A_Data1- (LSB) 2 42 B_Data1- (LSB) 52
3 A_Data2+ 3 43 B_Data2+ 53
4 A_Data2- 4 44 B_Data2- 54
5 A_Data3+ 5 45 B_Data3+ 55
6 A_Data3- 6 46 B_Data3- 56
7 A_Data4+ 7 47 B_Data4+ 57
8 A_Data4- 8 48 B_Data4- 58
9 A_Data5+ 9 49 B_Data5+ 59
10 A_Data5- 10 50 B_Data5- 60
11 A_Data6+ 11 51 B_Data6+ 61
12 A_Data6- 12 52 B_Data6- 62
13 A_Data7+ 13 53 B_Data7+ 63
14 A_Data7- 14 54 B_Data7- 64
15 A_Data8+ 15 55 B_Data8+ 65
16 A_Data8- 16 56 B_Data8- 66
17 A_Data9+ 17 57 B_Data9+ 67
18 A_Data9- 18 58 B_Data9- 68
19 A_Data10+ 19 59 B_Data10+ 69
20 A_Data10- 20 60 B_Data10- 70
21 A_Data11+ 21 61 B_Data11+ 71
22 A_Data11- 22 62 B_Data11- 72
23 A_Data12+ * 13 23 63 B_Data12+ * 13 73
24 A_Data12- * 13 24 64 B_Data12- * 13 74
25 A_Data13+ 25 65 B_Data13+ 75
26 A_Data13- 26 66 B_Data13- 76
27 A_Data14+ * 14 27 67 B_Data14+ * 14 77
28 A_Data14- * 14 28 68 B_Data14- * 14 78
29 Reserved 95 69 Reserved 97
30 Reserved - 70 Reserved -
31 Reserved 96 71 Reserved 98
32 Reserved - 72 Reserved -
33 IntExt (TTL) 39 73 ExtTrgGrb (TTL) 37
34 Reserved 40 74 Reserved 38
35 Vsync+ 41 75 Reserved * 15 33
36 Vsync- 42 76 Reserved 34
37 Hsync+ 43 77 Reserved * 15 35
38 Hsync- 44 78 Reserved 36
39 Pclk+ 49 79 GND 99
40 Pclk- 50 80 GND 100
*13: MSB for 12 bit *14: MSB for 14 bit *15: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instrum ents Corporation (http://www.ni.com /) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor. I Dimensional outline (unit: mm) 100 PCS-XE100MA+ PCS-XEM100LU2 80-PIN CABLE PCS-E80LKPA a PCS-E80FA 14 1 40 80 FERRITE CORE Cable type No. A8406-42 a 5000 ± 140 A8406-43 7000 ± 140 A8406-44 10000 ± 200 A8406-45 12000 ± 200 KACCA0139EB
Frame grabber cables A8406 series A8406-52/-53/-54/-55 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber A8406-52/-53/-54/-55 I Pin connection for A8406-52 TX20A-36PH1-D2P1-D1 Pin No. Signal PCS-XE100MA+ Pin No. TX20A-36PH1-D2P1-D1 Pin No. Signal PCS-XE100MA+ Pin No.
1 Data1+ (LSB) 1 21 Data1- (LSB) 2
2 Data2+ 3 22 Data2- 4
3 Data3+ 5 23 Data3- 6
4 Data4+ 7 24 Data4- 8
5 Data5+ 9 25 Data5- 10
6 Data6+ 11 26 Data6- 12
7 Data7+ 13 27 Data7- 14
8 Data8+ 15 28 Data8- 16
9 Data9+ 17 29 Data9- 18
10 Data10+ 19 30 Data10- 20
11 Data11+ 21 31 Data11- 22
12 Data12+ *16 23 32 Data12- *16 24
13 Data13+ 25 33 Data13- 26
14 Data14+ *17 27 34 Data14- *17 28
15 Reserved * 18 33 35 GND 99
16 Reserved *18 35 36 GND 100
17 ExtTrgGrb (TTL) 37 37 IntExt (TTL) 39
18 Vsync+ 41 38 Vsync- 42
19 Hsync+ 43 39 Hsync- 44
20 Pclk+ 49 40 Pclk- 50
*16: MSB for 12 bit *17: MSB for 14 bit *18: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. /G20 Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor. I Dimensional outline (unit: mm) KACCA0175EA 100 PCS-XE100MA+ PCS-XEM100LU2 40-PIN CABLE a 10140-60000EL Cable type No. A8406-52 a 5000 ± 140 A8406-53 7000 ± 140 A8406-54 10000 ± 200 A8406-55 12000 ± 200 20 40 12 1
HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. Cat. No. KACC1123E02 Oct. 2007 DN Frame grabber cables A8406 series A8406-62/-64 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 68-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber A8406-62/-64 I Pin connection for A8406-62/-64 PCS-XE68MA+ Pin No. Signal PCS-XE100MA+ Pin No. PCS-XE68MA+ Pin No. Signal PCS-XE100MA+ Pin No.
1 A_Data1+ (LSB) 1 35 A_Data1- (LSB) 2
2 A_Data2+ 3 36 A_Data2- 4
3 A_Data3+ 5 37 A_Data3- 6
4 A_Data4+ 7 38 A_Data4- 8
5 A_Data5+ 9 39 A_Data5- 10
6 A_Data6+ 11 40 A_Data6- 12
7 A_Data7+ 13 41 A_Data7- 14
8 A_Data8+ 15 42 A_Data8- 16
9 A_Data9+ 17 43 A_Data9- 18
10 A_Data10+ 19 44 A_Data10- 20
11 A_Data11+ 21 45 A_Data11- 22
12 A_Data12+ 23 46 A_Data12- 24
13 A_Data13+ * 19 25 47 A_Data13- * 19 26
14 A_Data14+ * 20 27 48 A_Data14- * 20 28
15 B_Data1+ (LSB) 51 49 B_Data1- (LSB) 52
16 B_Data2+ 53 50 B_Data2- 54
17 B_Data3+ 55 51 B_Data3- 56
18 B_Data4+ 57 52 B_Data4- 58
19 B_Data5+ 59 53 B_Data5- 60
20 B_Data6+ 61 54 B_Data6- 62
21 B_Data7+ 63 55 B_Data7- 64
22 B_Data8+ 65 56 B_Data8- 66
23 B_Data9+ 67 57 B_Data9- 68
24 B_Data10+ 69 58 B_Data10- 70
25 B_Data11+ 71 59 B_Data11- 72
26 B_Data12+ 73 60 B_Data12- 74
27 B_Data13+ * 19 75 61 B_Data13- * 19 76
28 B_Data14+ * 20 77 62 B_Data14- * 20 78
29 Reserved * 21 33 63 GND 99
30 Reserved * 21 35 64 GND 100
31 ExtTrgGrb (TTL) 37 65 IntExt (TTL) 39
32 Vsync+ 41 66 Vsync- 42
33 Hsync+ 43 67 Hsync- 44
34 Pclk+ 49 68 Pclk- 50
*19: MSB for 13 bit *20: MSB for 14 bit *21: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor . /G20 Note: The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor . KACCA0226EB 100 PCS-XE100MA+ PCS-XEM100LU2 68-PIN CABLE PCS-E68LKPB a PCS-XE68MA+ 34 68 13 5 FERRITE CORE I Dimensional outline (unit: mm) Cable Type No. A8406-62 a 5000 ± 140 A8406-64 10000 ± 200