A42180-R SEOUL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 32

Technical content

Features

  • Super high flux output and high luminance
  • Designed for high current operation
  • Low thermal resistance
  • SMT solderability
  • Lead free product
  • R o H S c o m p l i a n t

Applications

  • Mobile phone flash
  • Automotive interior / Exterior lighting
  • Automotive signal lighting
  • Automotive forward lighting
  • T o r c h
  • Architectural lighting
  • LCD TV / Monitor backlight
  • Projector light source
  • Traffic signals
  • T a s k l i g h t i n g
  • Decorative / Pathway lighting
  • Remote / Solar powered lighting
  • H o u s e h o l d a p p l i a n c e s Z-Power series is designed for high current operation and high flux output applications. Z-Power LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive large LCD backlights X42180 *The appearance and specifications of the product may be changed for improvement without notice.

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com2 Document No. : SSC-QP-7-07-24 (Rev.00) Full code form : X1 X2 X3 X4 X5 X6 X7 –X 8 X9 –X 10 X11 X12 X13 X14 1. Part Number -X 1 : Color -X 2 : Z-Power LED series number -X 3 : LENS type -X 4 : Chip quantity (or Power Dissipation) -X 5 : Package outline size -X 6 : Type of PCB -X 7 : Grade of characteristic code 2. Internal Number -X 8, X9 : Revision No. 3. Code Labeling -X 10 : Luminous flux (or Radiant flux for royal blue) -X 11 X12 X13 : Dominant wavelength (or x,y coordinates rank code) -X 14 : Forward voltage 4. Sticker Diagram on Reel & Aluminum Vinyl Bag For more information about binning and labeling, refer to the Application Note -1 LOT NUMBER : XXXXXXXXXX-XXX-XXX-XXXXXXX QUANTITY : 500 RANK : X10X11X12X13X14 X1X2X3X4X5X6X7-X8X9 SSC PART NUMBER : XXXXXXX-XX Full Code of Z-Power LED Series

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com3 Document No. : SSC-QP-7-07-24 (Rev.00) 1. Dome Type Notes : 1. All dimensions are in millimeters. (tolerance : ±0.2 ) 2. Scale : none 3. Slug of package is connected to anode. *The appearance and specifications of the product may be changed for improvement without notice. Body Lead Cathode Mark Lens SLUG Outline Dimension

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com4 Document No. : SSC-QP-7-07-24 (Rev.00) 1. Pure White (W42180) 1-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] T rank ФV [2] 70 80 91 lm U rank ФV [2] 91 105 - lm Correlated Color Temperature [3] CCT - 6300 - K CRI Ra - 75 - - Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ ½ 127 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W Parameter Symbol Value Unit Forward Current IF mA 1800 (@ 1KHz, 1/10 duty) Power Dissipation Pd 4 W Junction Temperature Tj 145(@ IF ≤ 700mA) ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [8] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance. [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. (25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC. [7] IF Max is guaranteed under the TJ ≤90 ºC. [8] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink. Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com5 Document No. : SSC-QP-7-07-24 (Rev.00) 2. Warm White (N42180) 2-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 72 - lm Correlated Color Temperature [3] CCT - 3000 - K CRI Ra - 93 - - Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ 1/2 124 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 3.2 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com6 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Warm White (N42180H) 3-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 86 - lm Correlated Color Temperature [3] CCT - 3000 - K CRI Ra - 80 - - Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ 1/2 124 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 3.2 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com7 Document No. : SSC-QP-7-07-24 (Rev.00) 4. Natural White (S42180) 4-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 76 - lm Correlated Color Temperature [3] CCT - 4000 - K CRI Ra - 93 - - Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ 1/2 124 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W 1. Please do not drive at rated current more than 5 sec. without proper heat sink Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 3.2 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [8] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance. [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. (25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC. [7] It is included the zener chip to protect the product from ESD. Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com8 Document No. : SSC-QP-7-07-24 (Rev.00) 5. Natural White (S42180H) 5-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 94 - lm Correlated Color Temperature [3] CCT - 4000 - K CRI Ra - 80 - - Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ 1/2 124 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W 1. Please do not drive at rated current more than 5 sec. without proper heat sink Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 3.2 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [8] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance. [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. (25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC. [7] It is included the zener chip to protect the product from ESD. Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com9 Document No. : SSC-QP-7-07-24 (Rev.00) 6. Blue (B42180) 6-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 22 - lm Dominant Wavelength[3] λD 455 465 475 nm Forward Voltage [4] VF 3.0 3.25 4 V View Angle 2Θ 1/2 130 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W Parameter Symbol Value Unit Forward Current IF 1000 mA Power Dissipation Pd 4 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com10 Document No. : SSC-QP-7-07-24 (Rev.00) 7. Royal Blue (D42180) 7-1 Electro-Optical characteristics at IF =350mA, TA =25ºC *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety Characteristics for Z-Power LED Parameter Symbol Value Unit Min Typ Max Radiant Power [1] ФV [2] - 468 - mW Dominant Wavelength [3] λD 455 457 460 nm Forward Voltage [4] VF 3.0 3.25 3.8 V View Angle 2Θ 1/2 130 deg. Thermal resistance [5] R θJ-B 8.8 ºC /W Thermal resistance [6] R θJ-C 7.2 ºC /W Parameter Symbol Value Unit Forward Current IF 1000 mA Power Dissipation Pd 4 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM -

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com11 Document No. : SSC-QP-7-07-24 (Rev.00) 8. Green (G42180) 8-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 70 - lm Dominant Wavelength[3] λD 520 525 535 nm Forward Voltage [4] VF 3.0 3.25 4.1 V View Angle 2Θ 1/2 130 deg. Thermal resistance [5] R θJ-B 9.5 ºC /W Thermal resistance [6] R θJ-C 8.0 ºC /W Parameter Symbol Value Unit Forward Current IF 1000 mA Power Dissipation Pd 4 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sin Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com12 Document No. : SSC-QP-7-07-24 (Rev.00) 9. Red (R42180) 9-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 48 - lm Dominant Wavelength[3] λD 618 625 630 nm Forward Voltage [4] VF 2.0 2.3 3.0 V View Angle 2Θ 1/2 130 deg. Thermal resistance [5] R θJ-B 9 ºC /W Thermal resistance [6] R θJ-C 7.8 ºC /W Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 2.4 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com13 Document No. : SSC-QP-7-07-24 (Rev.00) 10. Amber (A42180) 10-1 Electro-Optical characteristics at IF =350mA, TA =25ºC Parameter Symbol Value Unit Min Typ Max Luminous Flux [1] ФV [2] - 48 - lm Dominant Wavelength[3] λD 585 590 595 nm Forward Voltage [4] VF 2.0 2.3 3.0 V View Angle 2Θ 1/2 130 deg. Thermal resistance [5] R θJ-B 9 ºC /W Thermal resistance [6] R θJ-C 7.8 ºC /W Parameter Symbol Value Unit Forward Current IF 800 mA Power Dissipation Pd 2.4 W Junction Temperature Tj 145 ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC ESD Sensitivity [7] - ±10,000V HBM - *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±0.5nm for dominant wavelength [4] A tolerance of ±0.06V on forward voltage measurements [5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC) RθJ-C is measured with only emitter. .(25 ºC ≤TJ ≤ 110 ºC) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink Characteristics for Z-Power LED

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com14 Document No. : SSC-QP-7-07-24 (Rev.00) 1. Pure White 2. Warm White (N42180) 300 400 500 600 700 800 0.0 0.2 0.4 0.6 0.8 1.0 Relative Spectral Power Wa v e l e n g t h Color Spectrum, TA =25ºC 300 400 500 600 700 800 900 0.0 0.2 0.4 0.6 0.8 1.0 Standard eye response curve Relative Spectral Power Distribution Wa v e l e ngt h ( nm)

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com15 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Warm White (N42180H) 4. Natural White (S42180) Color Spectrum, TA =25ºC 300 400 500 600 700 800 0.0 0.2 0.4 0.6 0.8 1.0 Relative Spectral Power W avelength 300 400 500 600 700 800 0.0 0.2 0.4 0.6 0.8 1.0 Relative Spectral Power W avelength

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com16 Document No. : SSC-QP-7-07-24 (Rev.00) 5. Natural White (S42180H) 300 400 500 600 700 800 0.0 0.2 0.4 0.6 0.8 1.0 Relative Spectral Power W avelength 6. Red, Amber, Green, Blue(Royal Blue) Color Spectrum, TA =25ºC 400 500 600 700 0.0 0.2 0.4 0.6 0.8 1.0 Relative Spectral Power Distribution W avelength (nm )

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com17 Document No. : SSC-QP-7-07-24 (Rev.00) Junction Temperature Characteristics 1. Relative Light Output vs. Junction Temperature at IF =350mA 25 50 75 100 125 100 120 Relative Light Output(%) Junction Temperature( O Natural White, Warm White Pure White Blue(Royal Blue) Green 25 50 75 100 125 150 100 Relative Light Output [%] Junction Temperature [ o Red Amber

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com18 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Wavelength Shift vs Junction Temperature at IF =350mA Junction Temperature Characteristics 2. Forward Voltage Shift vs. Junction Temperature at IF =350mA 25 50 75 100 125 150 Dominant Wavelength Shift[nm] Junction Temperature[ o Red Green Blue(Royal Blue) Amber 25 50 75 100 125 150 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 Forward Voltage Shift[V] Junction Temperature [ O Pure White, Warm White, Natural White, Blue(Royal Blue) Red Amber Green

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com19 Document No. : SSC-QP-7-07-24 (Rev.00) 200 400 600 800 1000 Blue(Royal Blue), Green, Pure White Warm White, Natural White Average Forward Current [mA] Forward Voltage [V] Forward Current Characteristics 1. Forward Voltage vs. Forward Current , TA =25 ºc 100 200 300 400 500 600 700 800 Red, Amber Average Forward Current [mA] Forward Voltage [V]

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com20 Document No. : SSC-QP-7-07-24 (Rev.00) 0 200 400 600 800 1000 0.0 0.5 1.0 1.5 2.0 2.5 Forward Current [mA] Relative Lumious Flux(a.U) Blue(Royal Blue), Green, Pure White Warm White, Natural White Forward Current Characteristics 2. Forward Current vs. Normalized Relative Luminous Flux, TA =25 ºc 0 200 400 600 800 0.0 0.5 1.0 1.5 2.0 2.5 Forward Current [mA] Relative Lumious Flux(a.U) Red, Amber

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com21 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Forward Current vs Wavelength Shift, TA =25 ºc Forward Current Characteristics 0 100 200 300 400 500 600 700 800 900 1000 Dominant Wavelength Shift[nm] Forward current(mA) Red Green Blue(Royal Blue) Amber

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com22 Document No. : SSC-QP-7-07-24 (Rev.00) 1-1. Pure White, Warm White, Natural White, Green, Blue(Royal Blue) (TJMAX = 145 º C, @350mA) 1-2. Pure White, Warm White, Natural White, Green, Blue(Royal Blue) (TJMAX = 145 º C, @700mA) 0 2 55 07 5 1 0 0 1 2 5 1 5 0 100 150 200 250 300 350 400 RjaT = 60 o C/W RjaT = 50 o C/W RjaT = 40 o C/W RjaT = 30 o C/W Current [mA] Ambient Temperature [ o 0 25 50 75 100 125 150 100 200 300 400 500 600 700 800 RjaT = 35 o C/W RjaT = 30 o C/W RjaT = 25 o C/W RjaT = 20 o C/W Current [mA] Ambient Temperature [ o Ambient Temperature vs Allowable Forward Current

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com23 Document No. : SSC-QP-7-07-24 (Rev.00) 1-3. Pure White, Green, Blue(Royal Blue) (TJMAX = 90 ºC, at 1000mA) 0 25 50 75 100 125 150 200 400 600 800 1000 1200 RjaT = 25 o C/W RjaT = 20 o C/W Current [mA] Ambient Temperature [ o Ambient Temperature vs Allowable Forward Current

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com24 Document No. : SSC-QP-7-07-24 (Rev.00) 0 25 50 75 100 125 150 100 200 300 400 RjaT = 60 o C/W RjaT = 50 o C/W RjaT = 40 o C/W RjaT = 30 o C/W Current [mA] Ambient Temperature [ o 1-4. Red, Amber (TJMAX = 145 ºC, at 350mA) 0 25 50 75 100 125 150 100 200 300 400 500 600 700 800 RjaT = 60 o C/W RjaT = 50 o C/W RjaT = 40 o C/W RjaT = 30 o C/W Current [mA] Ambient Temperature [ o 1-5. Red, Amber (TJMAX = 145 ºC, @700mA) Ambient Temperature vs Allowable Forward Current

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com25 Document No. : SSC-QP-7-07-24 (Rev.00) 1. Pure White 2. Warm White, Natural White -80 -60 -40 -20 0 0.0 0.2 0.4 0.6 0.8 1.0 Relative Luminous Flux Angle(deg.) Typical Dome Type Radiation pattern 90-80 -60 -40 -20 0 0.0 0.2 0.4 0.6 0.8 1.0 Relative luminous flux Angle(deg.)

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com26 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Blue(Royal Blue), Green 4. Red, Amber -80 -60 -40 -20 0 0.0 0.2 0.4 0.6 0.8 1.0 Relative luminous flux Angle(deg.) -80 -60 -40 -20 0 0.0 0.2 0.4 0.6 0.8 1.0 Relative luminous flux Angle(deg.) Typical Dome Type Radiation pattern

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com27 Document No. : SSC-QP-7-07-24 (Rev.00) Recommended Solder pad Note : 1. All dimensions are in millimeters (tolerance : ±0.2 ) 2. Scale none *The appearance and specifications of the product may be changed for improvement without notice. 1. Solder pad 2. Solder paste pattern

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com28 Document No. : SSC-QP-7-07-24 (Rev.00) 3. Reflow Soldering Conditions / Profile 4. Hand Soldering conditions Lead : Not more than 3 seconds @MAX280℃ Slug : Use a thermal-adhesives Pre-heating 200 180 150 220 240 260 Rising 5 °C/sec Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (min) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Cooling -5 °C/sec Time [Hr] * Caution 1. Reflow soldering should not be done more than one time. 2. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com29 Document No. : SSC-QP-7-07-24 (Rev.00) Note : 1. The number of loaded products in the reel is 500ea 2. All dimensions are in millimeters (tolerance : ±0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Emitter Type Reel Packaging

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com30 Document No. : SSC-QP-7-07-24 (Rev.00) Note : 1. 6~10 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 a ZLED b c Outer Box Aluminum Vinyl Bag ba c SEOUL SEMICONDUCTOR CO.,LTD PART : W42180- PO CODE : ## ZLED 350 350 370 SIZE(mm)TYPE QUANTITY : * Packaging Structure

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com31 Document No. : SSC-QP-7-07-24 (Rev.00)

  • S t o r a g e To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box (or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30 degrees Centigrade. Humidity 50% maximum.
  • Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40 ℃ Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 60 ±5 ℃
  • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering.
  • Please avoid rapid cooling after soldering.
  • Components should not be mounted on warped direction of PCB.
  • Anti radioactive ray design is not considered for the products listed here in.
  • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed.
  • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used.
  • When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature.
  • LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage.
  • The appearance and specifications of the product may be modified for improvement without notice.
  • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.
  • The slug is connected to the anode. Therefore, we recommend to isolate the heat sink.
  • Attaching LEDs, don’t use adhesives to generate organic vapor. precaution for use

Z-Power LED X10490Z-Power LED X10490 Technical Data Sheet Rev. 10Rev. 10 February. 2011 February. 2011 www.acriche.comwww.acriche.com32 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED is encapsulated by silicone resin for the highest flux efficiency. Notes for handling of Silicone resin Z-Power LEDs

  • Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers)
  • Avoid leaving fingerprints on silicone resin parts.
  • Dust sensitivity silicone resin need containers having cover for storage.
  • When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent.
  • Please do not force over 2000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product
  • Please do not recommend to cover the silicone resin of the LEDs with other resin (epoxy, urethane, etc) Handling of Silicone resin LEDs