9S0812F401

9S0812H401 SANYODENKI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

(Pa)(inch H2O) 静圧 風量 0.20 0.15 0.10 0.05 0 5 10 15 20 25 35 30 (CFM) (m3/min) 12 V 5 V 13.8 V (Pa)(inch H2O) 静圧 風量 0.20 0.15 0.10 0.05 0 5 10 15 20 25 40 35 30 (CFM) (m3/min) 5 V 13.8 V 12 V (Pa)(inch H2O) (CFM) (m3/min) 静圧 風量 0.25 0.20 0.15 0.10 0.05 0 10 20 30 40 50 1.4 13.2 V 12 V 5 V CATALOG No. C1097B001 '20.1 .IT DC DC Fan 80 mm sq. Static pressure Static pressure AirflowAirflow Static pressure Airflow Operating voltage range Operating voltage range Operating voltage range ■ Airflow - Static Pressure Characteristics 9S0812H401 With pulse sensor 9S0812F401 With pulse sensor 9S0812M401 With pulse sensor DC Fan 80×80×25 mm San Ace 80 9S type Silent Fan Model 9S0812H401 is not TÜV certified. ■ ■General Specifications

• Material …………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
• Expected life ……………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage) Expected life at 40°C is for reference only.
• Motor protection function ……………… Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 573.
• Dielectric strength ……………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
• Insulation resistance …………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
• Sound pressure level (SPL) …………… At 1 m away from the air inlet
• Storage temperature …………………… -30 to +70˚C (Non-condensing) ■ ■Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH 2O] [dB (A)] [˚C] [h] 9S0812H401 -10 to +70 40000/60˚C (70000/40˚C) The following sensor and control options are available for selection. Available for all models. Lock sensor Differs according to the model. Refer to the table on p. 609. Without sensor PWM control The mark indicates Short Lead Time Service applicable models. See p. 626 for details.

リード線 AWG24 UL 1007 80±0.5 71.5±0.3 80±0.5 71.5±0.3 25±0.5 (4) (4) (10) +50 300 0 4-ø4.3±0.3 取付用穴 風吹出方向 回転方向 ø90 71.5±0.3 71.5±0.3 78.5 78.5 4-ø4.5 (Pa)(inch H2O) 静圧 風量 0.20 0.15 0.10 0.05 0 5 10 15 20 25 35 30 (CFM) (m3/min) 10 V 24 V 26.4 V (Pa)(inch H2O) 静圧 風量 0.20 0.15 0.10 0.05 0 5 10 15 20 25 35 30 (CFM) (m3/min) 13.8 V 6 V 12 V (Pa)(inch H2O) 静圧 風量 0.20 0.15 0.10 0.05 0 5 10 15 20 25 35 30 (CFM) (m3/min) 26.4 V 10 V 24 V DC CATALOG No. C1097B001 '20.1 .IT DC Fan 80 mm sq. Rotating direction Airflow direction Mounting hole Lead wire Inlet side, Outlet side Static pressure Airflow Static pressure Static pressure Airflow Airflow Operating voltage range Operating voltage range Operating voltage range ■ Airflow - Static Pressure Characteristics 9S0812L401 With pulse sensor 9S0824M401 With pulse sensor 9S0824L401 With pulse sensor ■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) ■ Dimensions (unit: mm) (With ribs) ■ Options Finger guards page: p. 558 Resin finger guards page: p. 565 Model no.: 109-049E, 109-049H, 109-049C Model no.: 109-1002G Resin filter kits page: p. 566 Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI), 109-1002F30 (30PPI), 109-1002F40 (40PPI) DC Fan 80×80×25 mm San Ace 80 9S type Silent Fan Model 9S0812H401 is not TÜV certified. ■ ■General Specifications

• Material …………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
• Expected life ……………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage) Expected life at 40°C is for reference only.
• Motor protection function ……………… Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 573.
• Dielectric strength ……………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
• Insulation resistance …………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
• Sound pressure level (SPL) …………… At 1 m away from the air inlet
• Storage temperature …………………… -30 to +70˚C (Non-condensing) ■ ■Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH 2O] [dB (A)] [˚C] [h] 9S0812H401 -10 to +70 40000/60˚C (70000/40˚C) The following sensor and control options are available for selection. Available for all models. Lock sensor Differs according to the model. Refer to the table on p. 609. Without sensor PWM control The mark indicates Short Lead Time Service applicable models. See p. 626 for details.