95Y0323-C ATGBICS
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
ATGBICS® All rights reserved. EOE Ref: ATGBICS_95Y0323_V1 Page 1 of 5 Product Datasheet 95Y0323-C IBM ® Compatible 10Gb/s SFP+ Direct Attach Cable Copper, Active
FEATURES
- Available lengths 1m to 15m
- Supports multi-gigabit data rates up to 10.5Gbps
- Supports 1x, 2x, 4x and 8x Fiber Channel data rates
- Hot-pluggable SFP 20PIN footprint
- I/O Connector designed for high-speed differential signal applications
- EMI/EMC performance
- Low Power Consumption < 0.5W
- Power Supply: +3.3V
- Compliant to SFP+ MSA
- Temperature Range: 0~ 70 °C
- ROHS
APPLICATIONS
- Storage Area Networks (SAN), Network Attached Storage and Storage Servers
- 1G/2G/4G/8G Fiber Channel
- High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
- Switched fabric I/O such as ultra-high bandwidth switches and routers
- Data center cabling infrastructure
- High density connections between networking equipment
DESCRIPTION
ATGBICS Compatible 95Y0323 SFP+ Active Copper Cable assemblies are high-performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ Active copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
ATGBICS® All rights reserved. EOE Ref: ATGBICS_95Y0323_V1 Page 2 of 5 Product Datasheet Recommended Operating Environment: Parameter Symbol Min Typical Max Unit Storage Ambient Temperature -40 +85 C Operating Case Temperature Tc +70 C Power Supply Voltage VCC 3.14 3.3 3.47 V Power Dissipation PD 0.5 W Systems Performance Media
10.5 Gpbs line speed, full duplex
Bit error rate: better than 10E-12 Hot-pluggable, industry-standard Small Form-Factor Specifications (Tested under recommended operating conditions, unless otherwise noted) Parameter Symbol Min Type Max Units Notes
Electrical characteristics
Supply Current Icc - - 100 mA 1 Transmitter Differential Input Voltage (PECL) VIN 250 1200 mVpp Receiver Differential Output Voltage (PECL) VO 185 1000 mVpp Impedance Zcable 90 100 110 Ohms MOD-DEF1, 2 VIH 2.0 - Vcc V Note: 1. The supply current includes SFP Module’s supply current and test board working current.
ATGBICS® All rights reserved. EOE Ref: ATGBICS_95Y0323_V1 Page 3 of 5 Product Datasheet Physical Data Parameter Description 30AWG 24AWG Units Cable Diameter OD 4.5 6.5 mm Bend Radius Minimum Sustained Bend mm AWG Information Reach @ 10Gb/s (m) AWG 7 28 10 28 12 24 15 24
ATGBICS® All rights reserved. EOE Ref: ATGBICS_95Y0323_V1 Page 4 of 5 Product Datasheet Pin Descriptions Pin Logic Symbol Name/Description Notes
1 VeeT Transmitter Ground
2 LV-TTL-O TX_Fault N/A 1
3 LV-TTL-I TX_DIS Transmitter Disable 2
4 LV-TTL-I/O SDA Tow Wire Serial Data
5 LV-TTL-I SCL Tow Wire Serial Clock
6 MOD_DEF0 Module present, connect to VeeT
7 LV-TTL-I RS0 N/A 1
8 LV-TTL-O LOS LOS of Signal 2
9 LV-TTL-I RS1 N/A 1
10 VeeR Receiver Ground
11 VeeR Receiver Ground
12 CML-O RD- Receiver Data Inverted
13 CML-O RD+ Receiver Data Non-Inverted
14 VeeR Receiver Ground
15 VccR Receiver Supply 3.3V 16 VccT Transmitter Supply 3.3V
17 VeeT Transmitter Ground
18 CML-I TD+ Transmitter Data Non-Inverted
19 CML_I TD- Transmitter Data Inverted
20 VeeT Transmitter Ground
ATGBICS® All rights reserved. EOE Ref: ATGBICS_95Y0323_V1 Page 5 of 5 Product Datasheet Mechanical Information