1979753-2-C ATGBICS
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
ATGBICS® All rights reserved. EOE Ref: ATGBICS_ 1979753-2-C_V1 Page 1 of 3 Product Datasheet 1979753-2-C Tyco Compatible 10Gb/s SFP+ Direct Attach Cable Copper, Passive, 1m
FEATURES
- Available lengths 0.5m to 10m
- Supports multi-gigabit data rates up to 10.5Gbps
- Supports 1x, 2x, 4x and 8x Fiber Channel data rates
- Hot-pluggable SFP 20PIN footprint
- Serial ID module on MOD (0-2)
- AC coupling of PECL signals
- EMI/EMC performance
- Low Power Consumption < 0.5W
- Power Supply:+3.3V
- Compliant to SFP+ MSA
- Temperature Range: 0~ 70 °C
- ROHS
APPLICATIONS
- Storage Area Networks (SAN), Network Attached Storage and Storage Servers
- 1G/2G/4G/8G Fiber Channel
- Switched fabric I/O such as ultra-high bandwidth switches and routers
- Data center cabling infrastructure
- High density connections among network equipment STANDARDS
- Compliant with SFP MSA (INF-8074i)
DESCRIPTION
ATGBICS Compatible 1979753-2-C SFP+ cable is a high-performance, cost effective I/O solution for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
ATGBICS® All rights reserved. EOE Ref: ATGBICS_ 1979753-2-C_V1 Page 2 of 3 Product Datasheet Recommended Operating Environment: Parameter Symbol Min Typical Max Unit Storage Ambient Temperature -40 +85 Operating Case Temperature Tc +70 Power Supply Voltage VCC 3.14 3.3 3.47 V Power Dissipation PD 0.5 W Systems Performance Media
10.5 Gpbs line speed, full duplex
Bit error rate: better than 10E-12 Hot-pluggable, industry-standard Small Form-Factor Specifications (Tested under recommended operating conditions, unless otherwise noted) Parameter Symbol Min Type Max Units Notes
Electrical Characteristics
Supply Current Icc - - 100 mA 1 Transmitter Differential Input Voltage (PECL) VIN 250 1200 mVpp Receiver Differential Output Voltage (PECL) VO 185 1000 mVpp Impedance Zcable 90 100 110 Ohms MOD-DEF1, 2 VIH 2.0 - Vcc V Note: 1. The supply current includes SFP Module’s supply current and test board working current.
ATGBICS® All rights reserved. EOE Ref: ATGBICS_ 1979753-2-C_V1 Page 3 of 3 Product Datasheet Physical Data Parameter Description 30AWG 24AWG Units Cable Diameter OD 4.5 6.5 mm Bend Radius Minimum Sustained Bend 25 35 mm AWG Information Reach @ 10Gb/s (m) AWG 0.5 30 1 30 3 30 5 24 7 24 10 24 Mechanical Information