10203-C | DigiCamel IC Datasheet

Online Datasheet

Read 10203-C online.

10203-C ATGBICS

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 8

Technical content

FEATURES

Compliant with SFF- 8436, SFF-8431, SFF-8432 and SFF-8472
Up to 10. 3125Gbps data rate per channel
Up to 7m transmission
Operating temperature: 0℃ to +70℃
Single 3.3V power supply
RoHS compliant
Cost-effective copper solution
Lowest total system power solution
Lowest total system EMI solution
Optimized design for Signal Integrity

APPLICATIONS

Servers
Networked storage systems
Routers
External storage systems
Data Center networking Communications
Switches
Routers INDUSTRIAL STANDARDS
InfiniBand Trade Association (IBTA)
IEEE802.3ba
40Gigabit Ethernet (40G BASE – CR4)

DESCRIPTION

ATGBICS QSFP+ (Quad Small Form-factor Pluggable Plus) copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables are used for 40GbE and Infiniband standards, to maximize performance. QSFP+ are designed to meet emerging data center and high-performance computing application needs for a high-density cabling interconnect system capable of delivering an aggregate data bandwidth of 40Gb/s. This interconnect system is fully compliant with existing industry standard specifications such as the QSFP MSA and IBTA (InfiniBand Trade Association). The QSFP+ cables support the bandwidth transmission requirements as defined by IEEE 802.3ba (40 Gb/s) and Infiniband QDR (4x10 Gb/s per channel) specifications.

1 GND Ground

2 CML-I Tx2n Transmitter Inverted Data Input

3 CML-I Tx2p Transmitter Non-Inverted Data Input

4 GND Ground

5 CML-I Tx4n Transmitter Inverted Data Input

6 CML-I Tx4p Transmitter Non-Inverted Data Input

7 GND Ground

8 LVTTL-I ModSelL Module Select

9 LVTTL-I ResetL Module Reset

10 Vcc Rx +3.3V Power Supply Receiver

11 LVCMOS-

I/O SCL 2-wire serial interface clock

12 LVCMOS-

I/O SDA 2-wire serial interface data

13 GND Ground

14 CML-O Rx3p Receiver Non-Inverted Data Output

15 CML-O Rx3n Receiver Inverted Data Output

16 GND Ground

17 CML-O Rx1p Receiver Non-Inverted Data Output

18 CML-O Rx1n Receiver Inverted Data Output

19 GND Ground

20 GND Ground

21 CML-O Rx2n Receiver Inverted Data Output

22 CML-O Rx2p Receiver Non-Inverted Data Output

23 GND Ground

24 CML-O Rx4n Receiver Inverted Data Output

25 CML-O Rx4p Receiver Non-Inverted Data Output

26 GND Ground

27 LVTTL-O ModPrsL Module Present

28 LVTTL-O IntL Interrupt

29 Vcc Tx +3.3V Power supply transmitter 30 Vcc1 +3.3V Power supply

31 LVTTL-I LPMode Low Power Mode

32 GND Ground

33 CML-I Tx3p Transmitter Non-Inverted Data Input

34 CML-I Tx3n Transmitter Inverted Data Input

35 GND Ground

36 CML-I Tx1p Transmitter Non-Inverted Data Input

37 CML-I Tx1n Transmitter Inverted Data Input

38 GND Ground

1 VeeT Module Transmitter Ground

2 LVTTL-O Tx_Fault Module Transmitter Fault

3 LVTTL-I Tx_Disable Transmitter disable; Turns off transmitter laser output

4 LVTTL-I/O SDA 2-wire Serial Interface Data Line (Same as MOD-DEF2 in INF-

8074i)

5 LVTTL-I/O SCL 2-wire Serial Interface Clock (Same as MOD-DEF1 in INF-8074i)

6 Mod_ABS Module Absent, connected to VeeT or VeeR in the module

7 LVTTL-I RS0 Rate Select 0, optionally controls SFP+ module receiver

8 LVTTL-O Rx_LOS Receiver Loss of Signal Indication (In FC designated as Rx_LOS

and in Ethernet designated as Signal Detect)

9 LVTTL-I RS1 Rate Select 1, optionally controls SFP+ module

10 VeeR Module Receiver Ground

11 VeeR Module Receiver Ground

12 CML-O RD- Receiver Inverted Data Output

13 CML-O RD+ Receiver Non-Inverted Data Output

14 VeeR Module Receiver Ground

15 VccR Module Receiver 3.3 V Supply 16 VccT Module Transmitter 3.3 V Supply

17 VeeT Module Transmitter Ground

18 CML-I TD+ Transmitter Non-Inverted Data Input

19 CML-I TD- Transmitter Inverted Data Input

20 VeeT Module Transmitter Ground

ATGBICS® All rights reserved. EOE Ref: ATGBICS_10203-C_V1 Page 6 of 8 Product Datasheet General Product Characteristics Q/4SFP+ DAC Specifications Number of Lanes Tx & Rx Channel Data Rate 10.3125 Gbps Operating Temperature 0 to + 70°C Storage Temperature -40 to + 85°C Supply Voltage 3.3 V nominal Electrical Interface 38 pins edge connector (QSFP+) 20 pins edge connector (SFP+) Management Interface Serial, I2C High Speed Characteristics Notes: 1. Reflection Coefficient given by equation SDD11(dB) < -12 + 2 × SQRT(f), with f in GHz 2. Reflection Coefficient given by equation SDD11(dB) < -6.3 + 13 × log10(f/5.5), with f in GHz Parameter Symbol Min Typical Max Unit Note Differential Impedance TDR 90 100 110 Ώ Insertion loss SDD21 -17.04 dB At 5.15625 GHz Differential Return Loss SDD11 SDD22 See 1 dB At 0.05 to 4.1 GHz See 2 dB At 4.1 to 11.1 GHz Differential to common mode return loss SCD11 SCD22 -10 dB At 0.2 to 11.1 GHz Common-mode to common- mode output return loss SCC11 SCC22 -3 dB At 0.01 to 11.1 GHz

ATGBICS® All rights reserved. EOE Ref: ATGBICS_10203-C_V1 Page 7 of 8 Product Datasheet Mechanical Information The connector is compatible with the SFF-8436 to SFF-8432 specification Regulatory Compliance Feature Test Method Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C Method 3015.7 Class 1(>2000 Volts) Electromagnetic Interference (EMI) FCC Class B Compliant with Standards CENELEC EN55022 Class B CISPR22 ITE Class B RF Immunity (RFI) IEC61000-4-3 Typically Show no Measurable Effect from a 10V/m Field Swept from 80 to 1000MHz RoHS Compliance RoHS Directive 2011/65/EU and it's Amendment Directives （EU） RoHS （EU）2015/863 compliant REACH Compliance REACH Regulation (EC) No 1907/2006 REACH (EC) No 1907/2006 compliant Length (m) Cable AWG 1 30 3 30 5 26 7 24

Product Information

10203-C specifications and overview.

Summary

10203 Extreme Compatible Direct Attach Copper Breakout Cable 40G QSFP+ to 4x10G SFP+ (2m, Passive)

Description

10203 Extreme Compatible Direct Attach Copper Breakout Cable 40G QSFP+ to 4x10G SFP+ (2m, Passive)

Source title 10203-C Datasheet(PDF) - ATGBICS by Approved Technology

Related Parts

More parts from the same family.

Browse manufacturer