88Y6054-C | DigiCamel IC Datasheet

Online Datasheet

Read 88Y6054-C online.

88Y6054-C ATGBICS

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 10

Technical content

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 1 of 10 Product Datasheet 88Y6054-C IBM® Compatible 10Gb/s SFP+ SR Transceiver Hot Pluggable, Duplex LC, +3.3V, 850nm, VCSEL MMF 300m DDM

FEATURES

Supports 9.95 to 11.3Gb/s bit rates
Hot-Pluggable
Duplex LC connector
850nm VCSEL transmitter, PIN photodetector
MMF links up to 300m @ OM3 and 400m @ OM4
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
Power Supply: +3.3V
Power consumption<1W
Temperature Range: 0 ~ 70°C
RoHS compliant

APPLICATIONS

10GBASE-SR/SW Ethernet
SONET OC-192 / SDH
10G Fibre Channel

DESCRIPTION

ATGBICS® Compatible 88Y6054-C Transceiver is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The 88Y6054-C converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification. The high performance 850nm VCSEL transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 300m links. The SFP+ Module is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 2 of 10 Product Datasheet Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Storage Temperature TS -40 +85 °C Case Operating Temperature TA 0 70 °C Maximum Supply Voltage Vcc -0.5 4 V Relative Humidity RH 0 85 % Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts) Parameter Symbol Min. Typical Max. Unit Notes Supply Voltage Vcc 3.135 3.465 V Supply Current Icc 250 mA Power Consumption P 1 W Transmitter Section: Input differential impedance Rin 100 Ω 1 Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) V -0.3 4 V Differential input voltage swing Vin,pp 180 700 mV 2 Transmit Disable Voltage VD 2 Vcc V 3 Transmit Enable Voltage VEN Vee Vee+0.8 V Receiver Section: Single Ended Output Voltage Tolerance V -0.3 4 V Rx Output Diff Voltage Vo 300 850 mV Rx Output Rise and Fall Time Tr/Tf 30 ps 4 LOS Fault VLOS fault 2 VccHOST V 5 LOS Normal VLOS norm Vee Vee+0.8 V 5 Notes: 1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC. 2. Per SFF-8431 Rev 3.0 3. Into 100 ohms differential termination. 4. 20%～80% 5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 3 of 10 Product Datasheet Optical Parameters (TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts) Parameter Symbol Min. Typical Max. Unit Notes Transmitter Section: Center Wavelength λt 840 850 860 nm RMS spectral width λRMS 4 nm Average Optical Power Pavg -7.3 -1 dBm 1 Optical Power OMA Poma -1.5 dBm Laser Off Power Poff -30 dBm Extinction Ratio ER 3.5 dB Transmitter Dispersion Penalty TDP 3.9 dB 2 Relative Intensity Noise Rin -128 dB/Hz 3 Optical Return Loss Tolerance 20 dB Receiver Section: Center Wavelength λr 840 860 nm Receiver Sensitivity (OMA) Sen -11.1 dBm 4 Stressed Sensitivity (OMA) SenST -7.5 dBm 4 Los Assert LOSA -30 - dBm Los Dessert LOSD -12 dBm Los Hysteresis LOSH 0.5 dB Overload Sat 0 dBm 5 Receiver Reflectance Rrx -12 dB Notes: 1. Average power figures are informative only, per IEEE802.3ae. 2. TWDP figure requires the host board to be SFF-8431 compliant. TWDP is calculated using the 3. 12dB reflection. 4. Conditions of stressed receiver tests per IEEE802.3ae. CSRS testing requires the host board to be SFF-8431 compliant. 5. Receiver overload specified in OMA and under the worst comprehensive stressed condition.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 4 of 10 Product Datasheet Timing Characteristics Parameter Symbol Min. Typical Max. Unit TX_Disable Assert Time t_off 10 us TX_Disable Negate Time t_on 1 ms Time to Initialize Include Reset of TX_FAULT t_int 300 ms TX_FAULT from Fault to Assertion t_fault 100 us TX_Disable Time to Start Reset t_reset 10 us Receiver Loss of Signal Assert Time TA,RX_LOS 100 us Receiver Loss of Signal Deassert Time Td,RX_LOS 100 us Rate-Select Change Time t_ratesel 10 us Serial ID Clock Time t_serial- clock 100 kHz Pin Assignment Diagram of Host Board Connector Block Pin Numbers and Name

1 VeeT Module transmitter ground 1

2 Tx Fault Module transmitter fault 2

Transmitter Disable; Turns off transmitter laser output 3

4 SDL 2 wire serial interface data input/output (SDA)

5 SCL 2 wire serial interface clock input (SCL)

6 MOD-

Module Absent, connect to VeeR or VeeT in the module 2 7 RS0 Rate select0, optionally control SFP+ receiver. When high, input data rate >4.5Gb/ s; when low, input data rate <=4.5Gb/s

8 LOS Receiver Loss of Signal Indication 4

9 RS1 Rate select0, optionally control SFP+ transmitter. When high, input data rate >4.5Gb/s; when low, input data rate <=4.5Gb/s

10 VeeR Module receiver ground 1

11 VeeR Module receiver ground 1

12 RD- Receiver inverted data out put

13 RD+ Receiver non-inverted data out put

14 VeeR Module receiver ground 1

15 VccR Module receiver 3.3V supply 16 VccT Module transmitter 3.3V supply

17 VeeT Module transmitter ground 1

18 TD+ Transmitter inverted data out put

19 TD- Transmitter non-inverted data out put

20 VeeT Module transmitter ground 1

Notes: 1. The module ground pins are isolated from the module case. 2. This pin is an open collector/drain output pin and is pulled up with 4.7K-10Kohms to Host_Vcc on the host board. 3. This pin is pulled up with 4.7K-10Kohms to VccT in the module. 4. This pin is an open collector/drain output pin and is pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 6 of 10 Product Datasheet SFP Module EEPROM Information and Management The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472. The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information (A0h) is listed in Table 2. And the DDM specification at address A2h. For more details of the memory map and byte definitions, please refer to the SFF -8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated. Table 1 - Digital Diagnostic Memory Map (Specific Data Field Descriptions)

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 7 of 10 Product Datasheet Table 2 - EEPROM Serial ID Memory Contents (A0h) Data Address Length (Byte) Name of Length Description and Contents Base ID Fields 0 1 Identifier Type of Serial transceiver (03h=SFP) 1 1 Reserved Extended identifier of type serial transceiver (04h) 2 1 Connector Code of optical connector type (07=LC) 3-10 8 Transceiver 10G Base-SR 11 1 Encoding 64B/66B 12 1 BR, Nominal Nominal baud rate, unit of 100Mbps 13-14 2 Reserved (0000h) 15 1 Length(9um) Link length supported for 9/125um fibre, units of 100m 16 1 Length(50um) Link length supported for 50/125um fibre, units of 10m 17 1 Length(62.5um) Link length supported for 62.5/125um fibre, units of 10m 18 1 Length(Copper) Link length supported for copper, units of meters 19 1 Reserved 20-35 16 Vendor Name SFP vendor name: ATGBICS 36 1 Reserved 37-39 3 Vendor OUI SFP transceiver vendor OUI ID 40-55 16 Vendor PN Part Number: “88Y6054-C” (ASCII) 56-59 4 Vendor rev Revision level for part number 60-62 3 Reserved 63 1 CCID Least significant byte of sum of data in address 0-62 Extended ID Fields 64-65 2 Option Indicates which optical SFP signals are implemented (001Ah = LOS, TX_FAULT, TX_DISABLE all supported) 66 1 BR, max Upper bit rate margin, units of % 67 1 BR, min Lower bit rate margin, units of % 68-83 16 Vendor SN Serial number (ASCII) 84-91 8 Date code OEM’s Manufacturing date code 92-94 3 Reserved 95 1 CCEX Check code for the extended ID Fields (addresses 64 to 94) Vendor Specific ID Fields

ATGBICS® All rights reserved. EOE Ref: ATGBICS_88Y6054-C_V1 Page 8 of 10 Product Datasheet 96-127 32 Readable OEM specific date, read only 128-255 128 Reserved Reserved for SFF-8079 Digital Diagnostic Monitor Characteristics Data Address Parameter Accuracy Unit 96-97 Transceiver Internal Temperature ±3.0 °C 98-99 VCC3 Internal Supply Voltage ±3.0 % 100-101 Laser Bias Current ±10 % 102-103 Tx Output Power ±3.0 dBm 104-105 Rx Input Power ±3.0 dBm Regulatory Compliance The 88Y6054-C complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following). Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E Method 3015.7 Class 1(>1000 V) Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 GR-1089-CORE Compatible with standards Electromagnetic Interference (EMI) FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 Compatible with Class 1 laser product.

Product Information

88Y6054-C specifications and overview.

Summary

88Y6054 IBM Compatible Transceiver SFP+ 10GBase-SR (850nm, MMF, 300m, DOM)

Description

88Y6054 IBM Compatible Transceiver SFP+ 10GBase-SR (850nm, MMF, 300m, DOM)

Source title 88Y6054-C Datasheet(PDF) - ATGBICS by Approved Technology

Related Parts

More parts from the same family.

Browse manufacturer