885007

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

2436 MHz BAW Filter

Data Sheet: Rev C 03/14/11 - 1 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ®

Applications

WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject bands: 2.6 GHz WiMAX/LTE, 2.3GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS, WiBro, Indian 2.3GHz 4G band 1.7 x 1.3 x 0.46 mm Product Features Functional Block Diagram Top view Low Loss in 2400-2472 MHz band High Rejection in 2496-2690 MHz bands: WiMAX/LTE/TD-LTE/Bands 7 & 38 High Rejection in 2300-2380 MHz bands: WiMAX/WCS/WiBro/Band 40/Indian 4G band Industry-leading small size: 1.7 x 1.3 x 0.46 mm +28 dBm (CW) power handling Performance over -30 to +85 ºC Single-ended operation Ceramic chip-scale package (CSP) Hermetically Sealed RoHS compliant, Pb-free General Description Pin Configuration 885007 is a high-performance, high-power Bulk Acoustic Wave (BAW) bandpass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band & high near-in rejection in the 2.3GHz & 2.6GHz WiMAX/LTE/TD-LTE bands. 885007 is specifically designed to enable coexistence of WiFi and WiMAX/LTE signals within the same device or in close proximity to one another. 885007 uses advanced and inexpensive packaging techniques to achieve an industry-leading 1.7 x 1.3 x 0.46 mm package. The filter exhibits excellent power handling capabilities. 885007 is referenced on multiple designs with the leading WiMAX chipset makers Pin # SE Description

9 Input

6 Output

1,2,3,4,5,7,8,10 Case Ground

Ordering Information

Part No. Description 885007 packaged part 885007-EVB evaluation board Standard T/R size = 10,000 units/reel. 6 7 8 9 5 10 3 2 1 4

Data Sheet: Rev C 03/14/11 - 2 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to + 85 ºC (unless otherwise noted) Parameter Conditions Min Typical (3) Max Units Center Frequency - 2436 - MHz Maximum Insertion Loss 2400 - 2472 MHz @ 25 ºC 2400 - 2472 MHz 2401 - 2480 MHz 2480 - 2482 MHz (6) 1.8 4.5 7.0 2.5 3.5 dB dB dB dB Absolute Attenuation (4) 800 - 2000 MHz 2000 - 2300 MHz 2300 - 2360 MHz 2360 - 2370 MHz (6) 2370 - 2380 MHz (6) 2495 - 2517 MHz @ 25 ºC 2495 - 2517 MHz 2496 - 2502 MHz (7) 2500 - 2502 MHz 2500 - 2510 MHz (7) 2502 - 2690 MHz 2690 - 5000 MHz 7200 - 7416 MHz 12.5 dB dB dB dB dB dB dB dB dB dB dB dB dB Amplitude Ripple 2400 - 2472 MHz (within any 18MHz Channel) - 1.3 2.0 dB p-p Input/output Return Loss 2400 - 2472MHz 6.0 14 - dB Source Impedance (single-ended) (5) - 50 - Load Impedance (single-ended) (5) - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Typical values are based on average measurements at room temperature 4. Relative to zero dB 5. This is the optimum impedance in order to achieve the performance shown 6. These bands fall on the filter transitions, thus the typical attenuation/loss values given are prone to high variability 7. Average attenuation level over the band Absolute Maximum Ratings Parameter (8) Rating Operating Temperature -30 to +85 oC Storage Temperature -40 to +85 oC Input Power (9) (In passband, CW signal) +28 dBm 8. Operation of this device outside the parameter ranges given above may cause permanent damage. 9. Represents the maximum allowable power level without electrical degradation equivalent to duration of 10,000 hours at 55 C

Data Sheet: Rev C 03/14/11 - 3 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Reference Design – 50 SE Input, 50 SE Output Schematic (top view) Pin Functions 1. Notes: Actual matching values may vary due to PCB layout and parasitic 1,2,3,4,5,7,8,10 Ground PC Board PCB routing detail Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. Grey indicates metalized area 2. This footprint represents a recommendation only 3. For solder pad recommendation see mechanical information Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 10nH Coil Wire-wound, 0402, +/- 0.2nH MuRata LQW15AN1N0C00 L2 12nH Coil Wire-wound, 0402, +/- 0.2nH MuRata LQW15AN1N2C00 PCB N/A 3-layer multiple 960850

Data Sheet: Rev C 03/14/11 - 4 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Typical Performance (at room temperature)

Data Sheet: Rev C 03/14/11 - 5 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Mechanical Information Package Information, Dimensions and Marking 0.46 NOM. 0.50 MAX. 0.24 1.54 1.70 0.55 0.205 0.45 0.201.151.30 0.235 0.24 Package Style: CSP-1713 Dimensions: 1.70 x 1.30 x 0.46 mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Marking code Marking Date code M12ID dot WWY MFG site The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code PCB Footprint 0.15 1.63 0.295 0.54 0.64 0.325 1.24 0.15 0.29 Tape and Reel Information Standard T/R size = 10,000 units/reel. All dimensions are in millimeters AA B B 1.75 4.0 4.0 2.0 8.03.50 0.60 1.5 SECTION A-A SECTION B-B 0.63 0.250 5° MAX. TYP. 1.47 1.88 8.8 ID dot 2.0 Direction of travel Ø330 Ø20.2 Ø13.0 Ø102 2.7

Data Sheet: Rev C 03/14/11 - 6 of 6 - Disclaimer: Subject to change without notice e © 2011 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Product Compliance Information ESD Information ESD Rating: 3A Value: Passes 6000 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 ESD Rating: C Value: Passes 400 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with th e latest version of J -STD-020, l ead free solder, 260°C Refer to Soldering Profile for recommended guidelines. This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contain ed herein is believed to be reliable . TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained her ein. TriQuint assumes no responsibility or li ability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely wi th the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are n ot warranted or authorized for use as critical components in medical, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.