DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
1585.66 MHz SAW filter
Preliminary Data Sheet: Rev - 03/08/13 - 1 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc.
Applications
GPS/GLONASS L1 filter Product Features Functional Block Diagram Top view Usable bandwidth 41 MHz High attenuation Small Size: 1.40 x 1.20 x 0.46 mm Ceramic chip-scale Package (CSP) Hermetically sealed RoHS compliant, Pb-free General Description Pin Configuration 857207 is a general purpose GPS/GLONASS filter . This filter was specifically designed in a 1.40 x 1.20 x 0.46 mm hermetic package. Pin # SE Description
1 Input
3,4 Output 2,5 Case Ground
Ordering Information
Part No. Description 857207 packaged part 857207-EVB evaluation board Standard T/R size = 10000 units/reel. Pb
Preliminary Data Sheet: Rev - 03/08/13 - 2 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +85 ºC Parameter (3) Conditions Min Typical (4) Max Units Center Frequency - 1585.66 - MHz Maximum Insertion Loss 1565.42 – 1585.42 MHz - 1.45 1.8 dB Maximum Insertion Loss 1574.42 – 1576.42 MHz - 1.29 1.6 dB Maximum Insertion Loss 1597.55 – 1605.89 MHz - 2.46 2.9 dB Amplitude Ripple (5) 1565.42 – 1585.42 MHz - 0.18 1.3 dB p-p Amplitude Ripple (5) 1597.55 – 1605.89 MHz - 1.13 1.3 dB p-p Amplitude Variation (Imbalance) 1565.42 – 1605.89 MHz - 1.20 3.0 dB p-p Phase Ripple (Imbalance) 1565.42 – 1585.42 MHz - 2.11 20 deg p-p Group Delay Variation 1597.55 – 1605.89 MHz - 1.48 9.0 ns p-p Relative Attenuation (6) 10 – 960 MHz 1427 – 1463 MHz 1710 – 1785 MHz 1850 – 1910 MHz 1920 – 1980 MHz 2400 – 2500 MHz 48.94 36.69 36.25 47.39 47.49 45.81 dB dB dB dB dB dB Common Mode Attenuation 777 – 915 MHz 1427 – 1463 MHz 1710 – 1785 MHz 1850 – 1910 MHz 1920 – 1980 MHz 2400 – 2500 MHz 44.04 39.95 46.92 46.78 43.79 34.36 dB dB dB dB dB dB Input VSWR 1565.42 – 1605.89 MHz - 2.56 2.8:1 - Output VSWR 1565.42 – 1605.89 MHz - 2.82 3.0:1 - Source Impedance (8) Load Impedance Single-ended Balanced 100 Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude Ripple is defined as the worst case peak to adjacent valley within the specified passband. 6. Relative to zero dB 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operable Temperature -30 to +85 oC Storage Temperature -30 to +85 oC Operation of this device outside the parameter ranges given below may cause permanent damage. Reference Design
Preliminary Data Sheet: Rev - 03/08/13 - 3 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Schematic 50 Single-ended Input 2,5, 1 3 50 4 100 100 Balanced Output PC Board Mounting Configuration M WWY JZ 0.15 1.35 0.15 1.00 0.425 0.35 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer multiple 960668
Preliminary Data Sheet: Rev - 03/08/13 - 4 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Typical Performance (at room temperature)
Preliminary Data Sheet: Rev - 03/08/13 - 5 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Typical Performance (at room temperature)
Preliminary Data Sheet: Rev - 03/08/13 - 6 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Mechanical Information Package Information, Dimensions and Marking 0.46 NOM. 0.50 MAX. 0.3251.20 0.25 0.50 1.25 1.40 0.25 0.90 JZ W W Y ID dot Date code code Marking Package Style: CSP-5BT Dimensions: 1.40 x 1.20 x 0.46 mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: WW = 2 digit week and Y = last digit of year Tape and Reel Information Standard T/R size = 10000 units/reel. All dimensions are in millimeters 8.8 ID dot 2.0 Direction of travel Ø330 Ø20.2 Ø13.0 Ø102 2.7 1.75 3.5 8.0 A A2.0 4.0 4.0 Ø1.0 Ø1.5 1.73 0.65 0.3 Section A-A 1.47
Preliminary Data Sheet: Rev - 03/08/13 - 7 of 7 - Disclaimer: Subject to change without notice e © 2013 TriQuint Semiconductor, Inc. Product Compliance Information ESD Information ESD Rating: TBD Value: Passes TBDV min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 ESD Rating: TBD Value: Passes TBD V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with th e latest version of J -STD-020, l ead free solder, 260°C Refer to Soldering Profile for recommended guidelines. This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product informati on, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained her ein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contain ed herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely wi th the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Caution! ESD-Sensitive Device