DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Data Sheet: Rev A 09-18-2014 - 1 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint
Applications
For Band 17 LTE applications LTE B17, data cards, mobile routers, repeaters For Base Station applications CSP-10KT, 2.5 x 2.00 x 0.56 mm Pin Configuration - Single Ended Pin No. Label
1 Downlink
3 Uplink
6 Ant/Phase Inductor
2,4,5,7,8,,9 Ground Functional Block Diagram 1 2 3 567 Top View General Description The 85718 2 is a high -performance Surface Acoustic Wave (SAW) duplexer designed to meet the strict LTE requirements for use in Band 17. 857182 is specifically designed to meet the high performance expectations o f insertion loss, isolation and rejection in LTE systems operating in B 17 applications under all operating condition. The 85718 2 uses common packaging techniques to achieve the industry standard 2.5 x 2.0 mm footprint. The duplexer exhibits excellent power handling capabilities.
Ordering Information
Part No. Description
857182 Packaged Part
857182-EVB Evaluation board description Standard T/R size = 10,000 units/reel Product Features High Rejection in Band 17 Usable bandwidth 12 MHz High Uplink-Downlink Isolation Low loss High attenuation Single-ended Downlink and Uplink operation Ceramic chip-scale Hermetic Package (CSP) Small Size: 2.5 x 2.00 x 0.56 mm Hermetic RoHS compliant, Pb-free
Data Sheet: Rev A 09-18-2014 - 2 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Uplink Electrical Specifications (1) Specified Temperature Range (2) = -20 to +90°C Parameter (3) Conditions Min Typ (4) Max Units Center Frequency - 710 - MHz Maximum Insertion Loss 704 – 716 MHz - 1.8 2.5 dB Amplitude Variation (5) 704 – 716 MHz over any 5 MHz - 0.5 1.2 dB p-p Absolute Attenuation (6) 10 – 686 MHz 728 – 734 MHz 734 – 746 MHz 746 – 768 MHz 768 –805 MHz 869 – 894 MHz 1408 – 1432 MHz 1565 – 1585 MHz 1597 – 1607 MHz 1805 – 1880 MHz 1930 – 1990 MHz 2110 – 2155 MHz 2155 – 2170 MHz 2400 – 2484 MHz 2816– 3000 MHz 35.2 26.1 56.2 39.7 35.5 33.7 39.4 39.3 42.9 49.0 52.6 58.7 60.4 66.2 60.6 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Uplink Return Loss 704 – 716 MHz 10 13.8 - dB Antenna Return Loss 704 – 716 MHz 10 16.6 - dB Uplink Impedance (7) Single ended - 50 - Antenna Impedance (7) Single ended - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB 6. This is the optimum impedance in order to achieve the performance shown Parameter Rating Storage Temperature (1) -40 to +90°C Operable Temperature (2) -20 to +90°C RF Input Power +29 dBm 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operable conditions. 3. Input Power at Downlink Pin 1 with applied CW signal at 55 °C for 10K hours in the 734-746 MHz frequency band Absolute Maximum Ratings
Data Sheet: Rev A 09-18-2014 - 3 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Downlink Electrical Specifications (1) Specified Temperature Range (2) = -20 to +90°C Parameter (3) Conditions Min Typ(4) Max Units Center Frequency - 740 - MHz Maximum Insertion Loss 734 – 746 MHz - 2.0 2.5 dB Amplitude Variation 734 – 746 MHz over any 5 MHz in- band - 0.5 1.2 dB p-p Absolute Attenuation (6) 10 – 674 MHz 674 – 686 MHz 686 - 704 MHz 704 – 716 MHz 716 – 722 MHz 776 – 793 MHz 793 – 805 MHz 805 – 2300 MHz 2300 – 3000 MHz 32.4 37.6 41.5 57.5 46.1 36.4 35.0 33.7 56.1 dB dB dB dB dB dB dB dB dB dB Downlink Return Loss 734 – 746 MHz 10 17.5 - dB Antenna Return Loss 734 – 746 MHz 10 14.1 - dB Downlink Impedance (single- ended ) (8) - 50 - Antenna Impedance (single- ended ) (8) - 50 - Uplink-Downlink Specification Uplink to Downlink Isolation 704 – 716 MHz 734 – 746 MHz 1408 – 1432 MHz 2112 – 2148 MHz 2816 – 3000 MHz 58.7 57.7 69.6 69.6 70.1 dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB 6. All power levels are referenced to the Downlink to Antenna port. 7. This is the optimum impedance in order to achieve the performance shown
Data Sheet: Rev A 09-18-2014 - 4 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Evaluation Board Uplink Downlink ANT 960562 L2L3 2,4,5,7,8,9 1 3 Downlink Uplink L1 50 50 ANT L3L2 Notes: 1. This is the optimum impedance in order to achieve the performance shown 2. PCB: 0.75 x 0.75 x 0.063; Construction: 1 OZ Cu Top, Middle and Bottom Layers; Material in between middle and top layer: TLY-5A (.0075); Material in between mid-bottom layers: FR4. (dimensions are in inches) Bill of Material Reference Des. Value Description Manuf. Part Number U1 n/a Duplexer 751/782 MHz TriQuint 857182 L1 13nH 0402, ± 2%, wire wound chip Murata LQW15AN13NG00 L2 2.7nH 0402, ± 0.1nH wire wound chip ind Murata LQW15AN2N7B00 L3 9.1nH 0402, ± 2%, wire wound chip ind Murata LQW15AN9N1G00 L4 4.7nH 0402, ± 0.1nH wire wound chip ind Murata LQW15AN4N7B00 L5 24nH 0402, ± 2% wire wound chip ind Murata LQW15AN24N1G00 SMA N/A SMA connector Radiall 9602-1111-018 PCB n/a Printed Circuit Board TriQuint 960562 PCB Mounting Pattern (Top View) 1.90 0.275 0.45 0.525 0.19x45° CHAMFER 0.45 0.95 2.40 0.275 Pin 1 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes.
Data Sheet: Rev A 09-18-2014 - 5 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Performance Plots Test conditions unless otherwise noted: Temp= +25°C UL Frequency Response d B Frequency (MHz) d B -100 -80 -60 -40 -20 630 675 720 765 810 UL Passband Response d B Frequency (MHz) d B 690 700 710 720 730 UL Wideband Response d B Frequency (MHz) d B -100 -80 -60 -40 -20 10 757.5 1505 2252.5 3000 UL Return Loss d B Frequency (MHz) d B -30 -20 -10 690 700 710 720 730 -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1 UL Path - Ant Port Impedance -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1 UL Port Impedance
Data Sheet: Rev A 09-18-2014 - 6 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint DL Frequency Response d B Frequency (MHz) d B -80 -60 -40 -20 630 675 720 765 810 DL Passband Response d B Frequency (MHz) 716 728 740 752 764 DL Wideband Response d B Frequency (MHz) d B -100 -80 -60 -40 -20 10 757.5 1505 2252.5 3000 DL Return Loss d B Frequency (MHz) -30 -20 -10 720 730 740 750 760 -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1 DL Path - Ant Port Impedance -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1 DL Port Impedance
Data Sheet: Rev A 09-18-2014 - 7 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Isolation d B Frequency (MHz) -100 -80 -60 -40 -20 630 675 720 765 810 Antenna Return Loss d B Frequency (MHz) -30 -20 -10 698 711.5 725 738.5 752
Data Sheet: Rev A 09-18-2014 - 8 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Package Information, Marking and Dimensions 2.00 2.50 0.56 NOM. 0.60 MAX. 0.18x45° CHAMF. 1.85 0.40 0.40 0.90 2.35 Marking code MFG site KX M WWY ID dot Date code Package Style: CSP-10KT Dimensions: 2.5 x 2.00 x 0.56 mm Body: Al2O3 ceramic Lid: Kovar or Alloy42, Au over Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code Notes: 1. All dimensions shown are typical in millimeters 2. An asterisk (*) in front of the marking code indicates prototype. Tape and Reel information Standard T/R size = 10,000 units/reel Direction of travel ID dot 2.0 Ø13.0 Ø20.2 Ø102 Ø330 8.8 2.7 1.75 3.5 8.0 A A2.0 4.0 4.0 Ø1.0 Ø1.5 2.75 1.1 0.3 Section A-A 2.23
Data Sheet: Rev A 09-18-2014 - 9 of 9 - Disclaimer: Subject to change without notice © 2014 TriQuint Product Compliance Information ESD Sensitivity Ratings Caution! ESD-Sensitive Device ESD Rating: Class 1B Value: Passes ≥ 500 V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 Solderability Compatible with both lead -free (260°C max imum reflow temperature) and tin/lead (245°C maximum reflow temperature) soldering processes. Refer to Soldering Profile for recommended guidelines. RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Not applicable. Hermetic package. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no res ponsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" an d with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing ord ers for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life - sustaining applications, or other applications where a failure would reasonably be expect ed to cause severe personal injury or death.