857174

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

70 MHz SAW Filter

Preliminary Data Sheet: Rev - 9/27/12 - 1 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ®

Applications

Typical 3 dB bandwidth of 4.9 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions: 19.00 x 6.50 x 1.75mm RoHS compliant, Pb-free 10 9 8 7 6 54321 Input Gnd Output GndGndGnd GndGndGndGnd General Description Pin Configuration The 85 7174 is a high -performance IF SAW filter with a center frequency of 70 MHz and a 3 dB bandwidth of 4.9 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. This device is RoHS compliant and Pb-free. Pin # SE Description

10 RF Input

5 RF Output

1,6 Ground 2,3,4,7,8,9 Case ground

Ordering Information

Part No. Description 857174 packaged part 857174-EVB evaluation board Standard T/R size = 2000 units/reel.

Preliminary Data Sheet: Rev - 9/27/12 - 2 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Specifications Electrical Specifications (1) Specified Temperature Range: (2) -55 to +105 ºC Parameter (3) Conditions Min Typical (4) Max Units Center Frequency - 70 - MHz Insertion Loss at minimum - - 25.5 dB Lower 1.0 dB Bandedge Upper 1.0 dB Bandedge (5) 72.1 67.9 MHz MHz Lower 3.0 dB Bandedge Upper 3.0 dB Bandedge (5) 72.35 67.65 MHz MHz Lower 40.0 dB Bandedge Upper 40.0 dB Bandedge (5) 66.6 73.4 MHz MHz Amplitude Variation(6) 67.9 – 72.1 MHz - - 1.2 dB p-p Phase Linearity 67.9 – 72.1 MHz - - 7 deg p-p Group Delay Variation 67.9 – 72.1 MHz - - 180 ns p-p Relative Attenuation 10 – 58 MHz 58 – 65 MHz 75 – 82 MHz 82 – 90 MHz 90 – 120 MHz 120 – 145 MHz 145 – 200 MHz dB dB dB dB dB dB dB Source Impedance (single-ended) (7) - - 50 - Load Impedance (single-ended) (7) - - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to insertion loss at center frequency 6. Is defined as the difference between the maximum and minimum loss within the specified frequency range 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature -55 to +105 oC Storage Temperature -55 to +105 oC Operation of this device outside the parameter ranges given above may cause permanent damage.

Preliminary Data Sheet: Rev - 9/27/12 - 3 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Reference Design – 50 SE Input, 50 SE Output Schematic Single-ended Input 1,2,3,4 6,7,8,9 18pF390nH 10 5 120nH Single-ended Output Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration YYWW TRIQUINT 857174 960656 L1 C1 2.51 6.70 8.86 .69 1.222.00 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 390nH Coil Wire-wound, 0805, 5% Coilcraft 0805CS-391XJLC L2 120nH Coil Wire-wound, 0805, 5% Coilcraft 0805CS-121XJLC C1 18pF Chip Capacitor, 0805, 5% MuRata GRM2165C1H180JZ01 SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer multiple 960656

Preliminary Data Sheet: Rev - 9/27/12 - 4 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Typical Performance (at room temperature)

Preliminary Data Sheet: Rev - 9/27/12 - 5 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Mechanical Information Package Information, Dimensions and Marking Date Code ID Dot R0.51 1.91 2.31 1.02 1.80 0.76 19.0 6.50 1.75 NOM. 1.96 MAX. YYWW TRIQUINT 857174 Package Style: SMP-75 Dimensions: 19.00 x 6.50 x 1.75mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: YY = last two digits of the year, WW = work week Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters ID dot Direction of travel Ø330 Ø102 2.7 Ø13.0 Ø20.2 2.0 32.8 Ø1.5 12.02.3 4.00.3 2.0 0.20 Section A-A 7.1 19.6 R0.75 1.75 Ø1.5 14.2 28.4 32.0 A A

Preliminary Data Sheet: Rev - 9/27/12 - 6 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Product Compliance Information ESD Information ESD Rating: TBD Value: Passes TBD V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 ESD Rating: TBD Value: Passes TBD V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with th e latest version of J -STD-020, l ead free solder, 260°C Refer to Soldering Profile for recommended guidelines. This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional produc t information, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained her ein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely wi th the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licen ses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Caution! ESD-Sensitive Device