857144

857144_15 TRIQUINT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

1176.45 MHz SAW Filter

Preliminary Data Sheet: Rev A 8/21/12 - 1 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ®

Applications

Usable bandwidth 20.46 MHz Single-ended operation Ceramic chip-scale Package (CSP) Small Size: 1.40 x 1.20 x 0.46 mm Hermetically Sealed RoHS compliant, Pb-free 1Input Output Gnd Gnd Gnd General Description Pin Configuration 857144 is specifically designed for GPS applications. 857144 uses advanced and inexpensive packaging techniques to achieve an extremely small 1.40 x 1.20 x 0.46 mm hermetically sealed package. Pin # Balanced Description

1 Input

4 Output

2,3,5 Ground

Ordering Information

Part No. Description 857144 packaged part 857144-EVB evaluation board Standard T/R size = 10000 units/reel.

Preliminary Data Sheet: Rev A 8/21/12 - 2 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Specifications Electrical Specifications (1) Specified Temperature Range: (2) -55 to +85 ºC Parameter (3) Conditions Min Typical (4) Max Units Center Frequency - 1176.45 - MHz Maximum Insertion Loss 1175.25 – 1177.65 MHz - 2.0 3.5 dB Lower 4.5dB Bandedge Upper 4.5dB Bandedge 1186.68 1154.06 1192.39 1166.22 MHZ MHZ Lower 21dB Bandedge Upper 21dB Bandedge 1126.45 1148.84 1202.93 1226.45 MHZ MHZ Amplitude Variation 1175.25 – 1177.65 MHz - 0.07 0.2 dB p-p Relative Attenuation (5) 414 – 550 MHz 1100 – 1126.45 MHz 1226.45 – 1250 MHz 1310 – 1770 MHz 39.6 33.4 38.4 37.6 dB dB dB dB Input Return Loss 1175.25 – 1177.65 MHz 10 14.5 - dB Output Return Loss 1175.25 – 1177.65 MHz 10 14.6 - dB Source Impedance (Single-ended) (6) - 50 - Load Impedance (Single-ended) (6) - 50 - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB. 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature (7) -55 to +85 oC Storage Temperature -55 to +85 oC Input Power (8) +15 dBm 7. Device may operate over this range with degraded Electrical Specifications 8. Device is measured for equivalent 10K hours @ +85 ºC [CW Signal] Operation of this device outside the parameter ranges given above may cause permanent damage.

Preliminary Data Sheet: Rev A 8/21/12 - 3 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Reference Design Schematic Single-ended Input 2,3,5 1 4 50 50 Single-ended Output Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration WWY 960568 JL 0.15 1.35 0.15 1.00 0.425 0.35 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031” thick Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA N/A SMA connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer multiple 960568

Preliminary Data Sheet: Rev A 8/21/12 - 4 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Typical Performance (at room temperature)

Preliminary Data Sheet: Rev A 8/21/12 - 5 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Mechanical Information Package Information, Dimensions and Marking 0.46 NOM. 0.50 MAX. 0.3251.20 0.25 0.50 1.25 1.40 0.25 0.90 JL WWY ID dot Date code code Marking Package Style: CSP-5BT Dimensions: 1.40 x 1.20 x 0.46 mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: WW = 2 digit week and Y = last digit of year Tape and Reel Information Standard T/R size = 10000 units/reel. All dimensions are in millimeters 8.8 ID dot 2.0 Direction of travel Ø330 Ø20.2 Ø13.0 Ø102 2.7 1.75 3.5 8.0 A A2.0 4.0 4.0 Ø1.0 Ø1.5 1.73 0.65 0.3 Section A-A 1.47

Preliminary Data Sheet: Rev A 8/21/12 - 6 of 6 - Disclaimer: Subject to change without notice e © 2012 TriQuint Semiconductor, Inc. Connecting the Digital World to the Global Network ® Product Compliance Information ESD Information ESD Rating: TBD Value: Passes TBD V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 ESD Rating: TBD Value: Passes TBD V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with th e latest version of J -STD-020, l ead free solder, 260°C Refer to Soldering Profile for recommended guidelines. This part is compliant with EU 2002/95/EC RoHS directive (R estrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information ab out TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever f or any of the information contained her ein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire ris k associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The infor mation contained herein or any use of such information does not grant, explicitly or implicitly, to any part y any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medica l, life -saving, or life -sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Caution! ESD-Sensitive Device