DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Usable 1 dB bandwidth of 20 MHz Small Size Low Loss Single Ended Operation at 50 Single-ended input \\ balanced output at 200 Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Package Pin Configuration Surface Mount 5.00 x 5.00 x 1.32 mm SMP-20 Bottom View 765 3 21 Single-Ended Configuration Pin No. Description
3 Input
7 Output
1,2,5,6 Ground 5,4,8 Case Ground SE-Balanced Configuration Pin No. Description 1.32 NOM. 1.52 MAX. 0.66 1.27 1.27 0.642.08 5.00 5.00
7 Input +
3 Output +
2 Output -
1,6,5 Ground 4,8 Case Ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plati ng 0.5 - 1.0µm, over a 2 – 6µm Ni plati ng Pb
172.8 MHz SAW Filter
Subject to change or obsolescence without notice Rev - 03/09 © TriQuint Semiconductor Page 2 of 6 Electrical Specifications (1) Operating Temperature Range: (2) -20 to +80 C Parameter (3) Minimum Typical (4) Maximum Unit Center Frequency - 172.8 - MHz Minimum Insertion Loss 162.80 – 182.80 MHz 8.0 9.0 dB 1.0 dB Bandwidth (5) 20 25.9 - MHz Amplitude Variation (6) 162.80 – 182.80 MHz 0.6 1.0 dB Group Delay Ripple (6, 7) 162.80 – 182.80 MHz nsec Relative Attenuation (5, 6) 10 – 100.00 MHz 100.00 – 153.30 MHz 153.30 – 154.80 MHz 154.80 – 157.80 MHz 187.80 – 190.80 MHz 190.80 – 194.30 MHz 194.30 – 198.30 MHz 198.30 – 250.00 MHz 250.00 – 310.00 MHz 310.00 – 410.00 MHz 410.00 – 1000.0 MHz dB dB dB dB dB dB dB dB dB dB dB Input /Output Return Loss 162.8 – 182.8 MHz dB EVM 162.8 – 167.8 MHz 167.8 – 172.8 MHz 172.8 – 177.8 MHz 177.8 – 182.8 MHz 1.0 1.1 1.3 1.6 2.7 2.7 2.7 2.7 Source Impedance (single-ended) (8) Load Impedance (single-ended) (8) Load Impedance (balanced) (8) 200 Notes: 1. All specifications are base d on the TriQuint test circuit matching schematics shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing to lerances 4. Typical values are based on averag e measurements at room temperature 5. All attenuation measur ements are referenced to Minimum Insertion Loss 6. Bandedge frequency points include m anufacturing and temperature variation. 7. Describes the maximum peak to adjacent vall ey variation over the defined frequency range. 8. This is the optimum impedance in order to achieve the performance shown
Subject to change or obsolescence without notice Rev - 03/09 © TriQuint Semiconductor Page 3 of 6 Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit Center Frequency - 172.8 - MHz Minimum Insertion Loss 162.8 – 182.8 MHz 8.0 9.0 dB 1.0 dB Bandwidth (5) 20 25.9 - MHz Amplitude Variation (6) 162.8 – 182.8 MHz 0.6 1.2 dB Group Delay Ripple (6, 7) 162.8 – 182.8 MHz nsec Relative Attenuation (5, 6) 10 – 100.00 MHz 100.00 – 153.30 MHz 153.30 – 154.80 MHz 154.80 – 157.80 MHz 187.80 – 190.80 MHz 190.80 – 194.30 MHz 194.30 – 198.30 MHz 198.30 – 250.00 MHz 250.00 – 310.00 MHz 310.00 – 410.00 MHz 410.00 – 1000.0 MHz 2.5 1.5 dB dB dB dB dB dB dB dB dB dB dB Input /Output Return Loss 162.8 – 182.8 MHz dB EVM 162.8 – 167.8 MHz 167.8 – 172.8 MHz 172.8 – 177.8 MHz 177.8 – 182.8 MHz 1.0 1.1 1.3 1.6 3.5 3.5 3.5 3.5 Source Impedance (single-ended) (8) Load Impedance (single-ended) (8) Load Impedance (balanced) (8) 200 Notes: 1. All specifications are base d on the TriQuint test circuit matching schematics shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing to lerances 4. Typical values are based on averag e measurements at room temperature 5. All attenuation measur ements are referenced to Minimum Insertion Loss 6. Bandedge frequency points include m anufacturing and temperature variation. 7. Describes the maximum peak to adjacent vall ey variation over the defined frequency range. 8. This is the optimum impedance in order to achieve the performance shown
Subject to change or obsolescence without notice Rev - 03/09 © TriQuint Semiconductor Page 4 of 6 Typical Performance (at room temperature)
Subject to change or obsolescence without notice Rev - 03/09 © TriQuint Semiconductor Page 5 of 6 Matching Schematics Actual matching values may vary due to PCB layout and parasitics 50 Single-ended Input 50 Single-ended Input 50 Single-ended Input 1,4 5,6,8 50 27nH 200 82nH 82nH3 9pF36nH 200 Balanced Output Marking PCB Footprint 1.47 5.20 2.28 .84 1.47 .84 .43 .71 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.0 Section A-A A A 0.3 1.8 5.25 5.25 Ø1.5 Ø1.58.0 4.0 2.0 5.5 1.75 logo TriQuint Pad 1 ID dot Direction of travel2.0Ø13.0 Ø20.2 12.8 Ø3302.7 Ø102 Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Date code CH JJJYM ID dot logo TriQuint code Marking 1,2,4 5,6,8 50 18pF 110nH 27nH 3 7 50 30nH 33nH
Subject to change or obsolescence without notice Rev - 03/09 © TriQuint Semiconductor Page 6 of 6 Maximum Ratings Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -40 +85 oC Storage Temperature Range Tstg -40 +85 oC Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Solderability Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters RoHS Information Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Pb