DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1220 MHz SAW Filter

Data Sheet: Rev. B 14-06-16 - 1 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com

Applications

 For broadband access applications Product Features  Usable bandwidth 50 MHz  Low loss  High attenuation  Balanced operation  Small size: 3.8 x 3.8 x 1.27 mm  Ceramic Surface Mount Package (SMP)  Hermetically sealed  RoHS (2002/95/EC) compliant, Pb-free SMP-15, 3.8 x 3.8 x 1.27 mm Functional Block Diagram 8 7 Input + Input - Output - Output +Gnd Gnd Gnd Gnd Top View Pin Configuration Pin No. Label

1 Input +

2 Input −

5 Output +

6 Output −

3,4,7,8 Ground General Description The 856 598 is a high -performance IF SAW filter with a center frequency of 1220 MHz and a usable bandwidth of 50 MHz It features low loss with excellent attenuation, and is designed to be used with a balanced input and output.

Ordering Information

Part No. Description

856598 Packaged Part

856598-EVB Evaluation board Standard T/R size = 4000 units/reel Pb

Data Sheet: Rev. B 14-06-16 - 2 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com Absolute Maximum Ratings Parameter Rating 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operable conditions. Storage Temperature (1) - 40 to + 85 °C Operable Temperature (2) 0 to + 70 °C Electrical Specifications (1) Test conditions unless otherwise noted: (2) Temperature Range 0 to + 70 °C Parameter (3) Conditions Min Typical (4) Max Units Center Frequency - 1220 - MHz Maximum Insertion Loss 1195 – 1245 MHz - 3.9 6.0 dB Amplitude Variation (5) 1195 – 1245 MHz 1195 – 1245 MHz (in any 8 MHz (channel) 1.1 1.0 2.2 2.0 dB p-p Group Delay Ripple (5) 1195 – 1245 MHz 1195 – 1245 MHz (in any 8 MHz (channel) 24 ns p-p Absolute Attenuation (6) 500 – 1170 MHz 1170 – 1172 MHz 1268 – 1270 MHz 1270 – 1500 dB Source/Load Impedance (7) Balanced - 200 -  Notes: 1. All specifications are based on the TriQuint schematic reference design shown on page 3. 2. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 4. Typical values are based on average measurements at room temperature. 5. Total variation over the defined frequency range 6. Absolute attenuation measurements are referenced to zero dB. 7. This is the optimum impedance in order to achieve the performance shown

Data Sheet: Rev. B 14-06-16 - 3 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com Evaluation Board JJJYM 3,4,7,8 200 22nH 18nH 200 Notes: 3-layers board - top, middle & bottom layer: 1 oz copper Substrates: .031” thick FR4 dielectric. Finish plating: Nickel: 3-8 µm thick, Gold: .03-.2 µm thick Hole plating: Copper min .0008 µm thick PCB Mounting Pattern 4.01 .81 .46 1.19 .81 1.191.70 .41 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Bill of Material Reference Des. Value Description Manuf. Part Number L1 22 nH Coil Wire-wound, 0402, ± 5 % Murata LQW15AN22NJ00 L2 18 nH Coil Wire-wound, 0402, ± 5 % Murata LQW15AN18NJ00 Port 1 & 2 Offset 85 ps - - - Port 3 & 4 Offset 82 ps - - - SMA N/A SMA connector Johnson Components 142-0701-801 PCB N/A 3-layer Multiple 960458

Data Sheet: Rev. B 14-06-16 - 4 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com Performance Plots (Test conditions unless otherwise noted: Temp.= + 25 °C) Frequency Response d B Frequency (MHz) -80 -60 -40 -20 1095 1157.5 1220 1282.5 1345 Passband Response d B Frequency (MHz) 1170 1195 1220 1245 1270 Wideband Response d B Frequency (MHz) -100 -80 -60 -40 -20 500 750 1000 1250 1500 Group Delay Response n s e c Frequency (MHz) -60 -30 1195 1207.5 1220 1232.5 1245 Input Smith Chart -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1 Output Smith Chart -0 .8 -0 .6 -0 .4 -0 .2 0.2 0.4 0.6 0.8 -1 -0 .5 0 0.5 1

Data Sheet: Rev. B 14-06-16 - 5 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com Mechanical Information 1.27 NOM. 1.45 MAX. 0.61 1.00 0.60 1.27 3.80 3.80 1.50 Date code8 JJJYM ID dot Sawtek logo code Marking Package Style: SMP-15 Dimensions: 3.8 x 3.8 x 1.27 mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code Notes: 1. All dimensions shown are typical in millimeters 2. An asterisk (*) in front of the marking code indicates prototype. Tape and Reel information Standard T/R size = 4000 units / reel. All dimensions are in millimeters 2.0 1.8 Ø1.50.3 8.0 4.0 4.1 4.1 Ø330 12.8 2.7 1.75 5.512.0 Ø1.5 A A Section A-A 2.0 Ø13.0 Ø20.2 Ø102 logo Sawtek ID dot Direction of travel JJJYM X JJJYM JJJYM X X

Data Sheet: Rev. B 14-06-16 - 6 of 6 - Disclaimer: Subject to change without notice © 2014 TriQuint www.triquint.com Product Compliance Information ESD Sensitivity Ratings Caution! ESD-Sensitive Device ESD Rating: 1A Value: Passes  400 V min. Test: Human Body Model (HBM) Standard: ESDA/JEDEC JS-001-2012 ESD Rating: B Value: Passes  200 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 Solderability Compatible with both lead -free (260 °C maximum reflow temperature) and tin/lead (245 °C maximum reflow temperature) soldering processes. Refer to Soldering Profile for recommended guidelines. RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the U se of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes:  Lead Free  Halogen Free (Chlorine, Bromine)  Antimony Free  TBBP-A (C15H12Br402) Free  PFOS Free  SVHC Free MSL Rating Not applicable. Hermetic package. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Email: info-sales@tqs.com Fax: +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the informati on contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life -saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.