856409

856409 TRIQUINT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• For DCS applications
• Usable bandwidth of 75 MHz
• Compatible with leading chipset suppliers
• Ultra low loss
• Single-ended input, 50Ω
• Balanced output, 200Ω
• Chip Scale Package (CSP)
• Hermetic Package Pin Configuration Surface Mount 1.50 x 1.50 x 0.76 mm Bottom View 1 23 6 54 Pin No. Description

2 Input

6,4 Output 1,3,5 Case ground 0.25 0.55 0.40 0.60 1.35 1.50 1.35 1.50 0.76 NOM. 0.84 MAX. Dimensions shown are nominal in millimeters All tolerances are ±0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 1 of 7

1842.5 MHz SAW Filter

Electrical Specifications (1) Operating Temperature Range: (2) +25 oC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1842.5 - MHz Maximum Insertion Loss 1805 - 1880 MHz 1.5 2.0 dB Absolute Attenuation 100 - 1200 MHz 1200 - 1705 MHz 1705 - 1764 MHz 1764 - 1785 MHz 1920 - 1980 MHz 1980 - 3000 MHz 3000 - 5415 MHz 5415 - 5640 MHz 5640 - 6000 MHz dB dB dB dB dB dB dB dB dB Output Amplitude Balance (|S31/S21|) 1805 - 1880 MHz -1.5 1.3 1.5 dB Output Phase Balance [Φ(S31)-ΦS21+180] 1805 - 1880 MHz -10 degree Input/Output VSWR 1805 - 1880 MHz 2.0 2.5 Source Impedance (4) - 50 - Ω Load Impedance (Balanced) (4) - 200||18nH - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended Input 1,3,5 2 4 50Ω 6 200 Ω18nH 200 Ω Balanced Output Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 2 of 7

Electrical Specifications (1) Operating Temperature Range: (2) -20 to +75 ºC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1842.5 - MHz Maximum Insertion Loss 1805 - 1880 MHz 1.5 2.3 dB Absolute Attenuation 100 - 1200 MHz 1200 - 1705 MHz 1705 - 1764 MHz 1764 - 1785 MHz 1920 - 1980 MHz 1980 - 3000 MHz 3000 - 5415 MHz 5415 - 5640 MHz 5640 - 6000 MHz dB dB dB dB dB dB dB dB dB Output Amplitude Balance (|S31/S21|) 1805 - 1880 MHz -1.5 1.3 1.5 dB Output Phase Balance [Φ(S31)-ΦS21+180] 1805 - 1880 MHz -10 degree Input/Output VSWR 1805 - 1880 MHz 2.0 2.6 Source Impedance (4) - 50 - Ω Load Impedance (Balanced) (4) - 200||18nH - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended Input 1,3,5 2 4 50Ω 6 200 Ω18nH 200 Ω Balanced Output Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 3 of 7

Electrical Specifications (1) Operating Temperature Range: (2) -25 to +80 ºC Parameter (3) Minimum Typical Maximum Unit Center Frequency - 1842.5 - MHz Maximum Insertion Loss 1805 - 1880 MHz 1.5 2.4 dB Absolute Attenuation 100 - 1200 MHz 1200 - 1705 MHz 1705 - 1764 MHz 1764 - 1785 MHz 1920 - 1980 MHz 1980 - 3000 MHz 3000 - 5415 MHz 5415 - 5640 MHz 5640 - 6000 MHz dB dB dB dB dB dB dB dB dB Output Amplitude Balance (|S31/S21|) 1805 - 1880 MHz -1.5 1.3 1.5 dB Output Phase Balance [Φ(S31)-ΦS21+180] 1805 - 1880 MHz -10 degree Input/Output VSWR 1805 - 1880 MHz 2.0 2.8 Source Impedance (4) - 50 - Ω Load Impedance (Balanced) (4) - 200||18nH - Ω Notes: 1. All specifications are based on the test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance shown Test Circuit: 50 Ω Single-ended Input 1,3,5 2 4 50Ω 6 200 Ω18nH 200 Ω Balanced Output Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 4 of 7

Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 5 of 7

50 Ω Single-ended Input 1,3,5 2 4 50Ω 6 200 Ω18nH 200 Ω Balanced Output Marking PCB Footprint WWY M Date code MFG site ID dot Marking code 0.200.70 0.50 0.35 1.45 1.45 The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel A A Section A-A 0.25 1.09 1.83 1.83 Ø1.5 Ø1.0 4.0 4.0 2.0 8.03.5 1.75 8.8 ID dot 2.0 Direction of travel Ø330 Ø20.2 Ø13.0 Ø102 2.7 Dimensions shown are nominal in millimeters Packaging quantity: 10000 units/reel Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 6 of 7

Parameter Symbol Minimum Maximum Unit Operating Temperature Range T -25 +80 oC Storage Temperature Range Tstg -40 +85 oC Warnings

• Electrostatic Sensitive Device (ESD)
• Avoid ultrasonic exposure Material Content
• Does not contain lead (Pb) or other RoHS restricted materials Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Soldering Profile Other Technical Information Subject to change or obsolescence without notice Rev D 08-Dec-2004 Page 7 of 7